Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

Product Overview

The Ingersoll Rand 47623601001 24266058 Hose is an industrial replacement hose designed for use in compatible Ingersoll Rand equipment and fluid or air-handling systems. With a specified hose length of 12 inches and a shipping weight of approximately 3 kg, this component is intended for applications where dependable connection, routing, and transfer of air, fluid, or other system media are required.

Industrial hoses play an important role in compressors, process equipment, pneumatic systems, and other machinery by providing flexible connections between fixed components. Compared with rigid piping, a properly selected hose can simplify equipment assembly, accommodate vibration, and allow easier access during maintenance or component replacement.

The 47623601001 reference is associated with the 24266058 hose identification. When sourcing a replacement, technicians should verify the complete part number, equipment model, hose-end configuration, connection type, routing requirements, and application before installation. Physical length alone should not be used as the only compatibility criterion.

With a 12 in (approximately 305 mm) hose length, the 47623601001 24266058 provides a compact connection option for equipment layouts where components are installed relatively close together. Its compact size can also be useful during replacement work where cabinet, compressor, or machinery space is limited.

---

Technical Specifications

Parameter	Specification
Manufacturer	Ingersoll Rand
Part Number	47623601001
Associated Part Number	24266058
Product Type	Industrial Hose
Hose Length	12 in
Approximate Length	305 mm
Shipping Weight	3 kg
Application	Industrial Equipment and Fluid/Air Connection
Installation	Compatible Ingersoll Rand Equipment
Component Function	Flexible system connection
Replacement Type	Original-equipment-compatible replacement component

Note: The exact hose material, internal diameter, pressure rating, temperature rating, fitting configuration, and media compatibility should be confirmed against the equipment documentation and the identification of the original hose before replacement.

---

What Is the Ingersoll Rand 47623601001 24266058 Hose?

The Ingersoll Rand 47623601001 24266058 is a replacement hose used as part of a compatible industrial equipment assembly.

A hose in an industrial machine is more than simply a flexible tube. It forms part of the equipment’s fluid or air circuit and must maintain a reliable connection while tolerating the mechanical conditions generated during operation.

Depending on the host equipment and system design, an industrial hose can be used to connect:

• Compressor components
• Air-treatment components
• Valves
• Regulators
• Fluid-handling assemblies
• Cooling circuits
• Lubrication components
• Pneumatic components
• Process equipment
• Auxiliary equipment

The exact service performed by the 47623601001 24266058 depends on the equipment configuration in which it is installed.

For this reason, replacement should be based on the complete equipment documentation and part identification rather than on length alone.

---

Hose Function in Industrial Equipment

Flexible hoses are commonly incorporated into industrial machinery because they provide several mechanical advantages over rigid connections.

Flexible Connection

A hose can connect two components that may experience slight movement relative to one another. This is particularly useful in machinery containing pumps, compressors, motors, valves, or other components that generate vibration.

Vibration Accommodation

Rotating machinery can generate vibration during normal operation. A properly specified flexible hose can help prevent excessive mechanical stress from being transferred directly to rigid piping or fittings.

Simplified Equipment Assembly

Flexible connections can make equipment assembly easier by accommodating minor positional differences between components.

Maintenance Accessibility

A hose connection can simplify removal and installation of equipment components during servicing, provided the hose routing and connection arrangement are designed appropriately.

Compact Routing

The 12 in length of the 47623601001 24266058 makes it suitable for relatively short connection paths where a compact flexible component is required.

---

Working Principle

The operating principle of an industrial hose is straightforward: the hose provides a sealed flexible passage between two connected points in an equipment circuit.

A simplified system arrangement can be represented as:

Source Component → Hose Connection → Receiving Component

The source may be a compressor, pump, reservoir, valve, manifold, or another system component. The hose transfers the applicable medium while maintaining mechanical flexibility between the connected components.

During operation, the hose must withstand the environmental and mechanical conditions imposed by the equipment. These can include:

• Internal pressure
• Temperature changes
• Vibration
• Mechanical movement
• Repeated operating cycles
• Installation bending
• External environmental conditions

The exact allowable operating conditions depend on the hose construction and the equipment specification.

---

Role in Compressor and Industrial Systems

Ingersoll Rand equipment commonly incorporates numerous interconnected components. Flexible hoses can provide important connections between assemblies while helping accommodate vibration and service access.

A hose such as the 47623601001 24266058 can form part of an equipment-level connection system where reliable routing is required within a relatively compact installation area.

The hose should be considered as one element of the overall system rather than an isolated component.

A typical maintenance chain may include:

Equipment → Connection Assembly → Hose → Valve/Fitting → Process Component

A problem in any part of this chain can affect overall equipment performance.

For example, a damaged hose may result in leakage, pressure loss, contamination, unstable system operation, or reduced equipment efficiency depending on its application.

---

Industrial Applications

Air Compressor Systems

Flexible hoses are commonly used in compressor assemblies to connect various pneumatic and auxiliary components.

The 47623601001 24266058 may therefore be used within compatible Ingersoll Rand compressor equipment where its specified dimensions and connection arrangement match the original installation.

Pneumatic Equipment

Industrial pneumatic systems depend on reliable air connections. Hoses can provide flexible connections between valves, regulators, manifolds, and other pneumatic components.

Fluid Handling

Where the hose specification permits the intended medium, flexible connections can be used in fluid-handling circuits.

However, the exact hose material and pressure/temperature rating must be confirmed before using the component with a particular fluid.

Maintenance and Replacement Applications

Replacement hoses are particularly important for equipment maintenance because hose materials can deteriorate over time.

Regular replacement can help prevent failures associated with:

• Aging
• Cracking
• Abrasion
• Leakage
• Connection deterioration
• Excessive vibration
• Mechanical damage

---

Installation Guidelines

Correct installation is essential for achieving reliable service life.

Verify the Part Number

Before installation, verify:

• 47623601001
• 24266058
• Hose length
• Connection configuration
• Equipment model
• Existing hose routing

The replacement hose should match the original application.

Inspect the Replacement Hose

Before installation, inspect the hose for:

• Cuts
• Cracks
• Surface damage
• Deformation
• Contamination
• Damaged fittings
• Packaging-related damage

Do not install a hose that shows visible damage.

Compare the Hose Length

The specified length is 12 inches.

Before removing the original hose, technicians should compare the replacement length and routing with the existing installation.

An incorrect hose length can result in:

• Excessive tension
• Excessive bending
• Poor routing
• Contact with moving components
• Contact with hot surfaces
• Increased mechanical stress

Maintain Correct Routing

The hose should follow the intended equipment routing.

Avoid:

• Sharp bends
• Twisting
• Crushing
• Unnecessary tension
• Abrasion against metal edges
• Contact with moving components

The minimum bend radius specified for the particular hose should be respected.

Secure Connections

Connections should be installed according to the applicable equipment maintenance procedure.

Improperly secured connections can lead to leakage or hose movement during operation.

---

Hose Replacement Procedure

A general replacement sequence can be structured as follows:

Step 1: Shut Down the Equipment

Stop the equipment according to the manufacturer’s maintenance procedure.

Step 2: Isolate the System

Where applicable, isolate the relevant air, fluid, hydraulic, or pneumatic circuit.

Step 3: Release Stored Pressure

Do not remove a pressurized hose. Any stored pressure must be safely released before disconnecting the component.

Step 4: Record Existing Routing

Before removing the old hose, note its routing and connection orientation.

Step 5: Remove the Existing Hose

Disconnect the hose using the appropriate maintenance tools.

Step 6: Inspect Adjacent Components

Inspect fittings, valves, connectors, clamps, and nearby components for damage or contamination.

Step 7: Install the Replacement

Install the 47623601001 24266058 hose in the correct orientation.

Step 8: Check Routing

Confirm that the 12-inch hose does not experience excessive bending, twisting, stretching, or abrasion.

Step 9: Restore the System

Restore the equipment according to the applicable commissioning procedure.

Step 10: Check for Leakage

Operate the equipment under controlled conditions and inspect the connection points for leakage or abnormal movement.

---

Troubleshooting the 47623601001 24266058 Hose

Hose Leakage

Leakage can be caused by:

• Damaged hose material
• Loose connection
• Damaged fitting
• Incorrect installation
• Excessive mechanical stress
• Aging
• Incorrect replacement component

Inspect the hose and both connection points carefully.

Hose Surface Cracking

Visible cracking may indicate material deterioration or environmental exposure.

A hose showing significant cracking should be replaced rather than returned to service.

Abrasion

Repeated contact with brackets, cabinet edges, pipes, or other equipment can wear through the hose surface.

Check routing whenever abrasion is detected.

Excessive Vibration

If the hose moves excessively during operation, investigate:

• Incorrect routing
• Missing support
• Excessive equipment vibration
• Incorrect hose length
• Improper connection

The underlying mechanical cause should be corrected rather than simply tightening the hose connection.

Pressure or Flow Problems

If a hose is part of a pressure or flow circuit, restricted flow may result from:

• Hose deformation
• Internal obstruction
• Excessive bending
• Incorrect routing
• Damaged connection

The complete circuit should be checked before replacing other components.

---

Preventive Maintenance

Regular inspection can help identify hose deterioration before an unexpected equipment shutdown occurs.

Visual Inspection

Inspect the hose for:

• Cracks
• Cuts
• Abrasion
• Bulging
• Flattening
• Discoloration
• Leakage
• Fitting damage

Connection Inspection

Check both ends of the hose for signs of:

• Leakage
• Looseness
• Corrosion
• Mechanical damage
• Improper alignment

Routing Inspection

Confirm that the hose remains correctly positioned and does not contact moving or excessively hot components.

Vibration Monitoring

Changes in equipment vibration can accelerate hose deterioration. If a previously stable hose begins moving excessively, inspect the associated machinery.

Replacement Planning

Hoses are wear-sensitive components in many industrial applications. Preventive replacement intervals should be determined according to the actual application, operating environment, equipment recommendations, and observed condition.

---

Replacement Considerations

When purchasing or replacing the Ingersoll Rand 47623601001 24266058 Hose, technicians should verify the following information:

Verification Item	Requirement
Manufacturer	Ingersoll Rand
Part Number	47623601001
Associated Number	24266058
Hose Length	12 in
Shipping Weight	3 kg
Equipment Model	Must be confirmed
Connection Configuration	Must match original
Hose Routing	Must be compatible
Application Medium	Must be compatible
Pressure Rating	Verify before installation
Temperature Rating	Verify before installation

The 12-inch length is an important identification characteristic, but it should be evaluated together with the connection configuration and equipment application.

---

Physical Dimensions and Logistics

The specified hose length for the 47623601001 24266058 is 12 inches, equivalent to approximately 305 mm.

The listed shipping weight is 3 kg.

Shipping weight can be useful for:

• Spare-parts logistics
• Warehouse planning
• Transportation arrangements
• Maintenance inventory
• Replacement planning
• Packaging calculations

The shipping weight should not automatically be interpreted as the net weight of the hose itself, because packaging and shipment-related materials may contribute to the stated value.

---

Compatibility with Industrial Equipment

The hose should be matched to the equipment in which it is intended to operate.

Potential system-level components may include:

• Ingersoll Rand compressor assemblies
• Air treatment equipment
• Valves
• Regulators
• Manifolds
• Fittings
• Filters
• Pressure-control components
• Lubrication assemblies
• Cooling-system components
• Pneumatic connections
• Instrumentation components

The exact compatibility depends on the equipment model and hose connection specification.

A component with the same nominal length should not automatically be treated as a direct substitute.

---

Engineering Best Practices

Use the Complete Part Number

Always identify the component using the complete 47623601001 24266058 reference when ordering or documenting maintenance work.

Avoid Unverified Substitutions

A generic hose may have a similar appearance but different pressure, temperature, chemical compatibility, fitting, or material characteristics.

Keep Spare Hoses Properly Stored

Spare hoses should be protected from excessive heat, sunlight, moisture, chemicals, sharp objects, and unnecessary mechanical deformation.

Maintain Clean Connections

Contamination at a connection point can affect sealing and system reliability.

Document Replacements

Maintenance records should include the installed part number, equipment location, replacement date, and observed condition of the removed hose.

---

Recommended Related Ingersoll Rand Components

Component Type	General Function
Oil Filter	Removes contaminants from lubricating oil
Air Filter	Filters incoming air
Air-Oil Separator	Separates oil from compressed air
Breathing Filter	Supports equipment ventilation or air filtration
Thermostatic Valve Components	Controls temperature-related fluid flow
Hose Assemblies	Provides flexible equipment connections
O-Rings	Provides sealing at compatible joints
Valve Components	Controls or regulates system flow

These components may appear within the same broader maintenance environment, but compatibility must always be confirmed for the specific Ingersoll Rand equipment model.

---

Key Advantages

Compact 12-Inch Configuration

The 12 in hose length provides a compact flexible connection for suitable equipment layouts.

Flexible Mechanical Connection

The hose can accommodate the movement and vibration associated with industrial machinery when correctly installed.

Maintenance-Friendly Design

A replacement hose can simplify servicing when an existing connection becomes worn or damaged.

Suitable for Industrial Equipment

The component is intended for integration into compatible Ingersoll Rand equipment and associated industrial systems.

Clear Replacement Identification

The combined references 47623601001 and 24266058 provide useful identification information when sourcing replacement parts.

Practical Spare-Part Logistics

The listed 3 kg shipping weight can be used for maintenance inventory and transportation planning.

---

Technical FAQs

What is the Ingersoll Rand 47623601001 24266058?

The Ingersoll Rand 47623601001 24266058 is an industrial hose used as a flexible connection component in compatible equipment.

What is the hose length?

The specified hose length is 12 inches, approximately 305 mm.

What is the shipping weight?

The listed shipping weight is 3 kg.

What is the function of an industrial equipment hose?

An industrial hose provides a flexible connection for transferring air, fluid, or another compatible medium between equipment components while accommodating appropriate movement and vibration.

Can any 12-inch hose replace the 47623601001?

No. Length alone is not sufficient to establish compatibility. The connection configuration, hose construction, pressure rating, temperature rating, application medium, and equipment requirements should also be verified.

What should be checked before installing the hose?

Verify the complete part number, equipment model, hose routing, connection configuration, and applicable operating requirements. The hose should also be inspected for visible damage before installation.

What can cause premature hose failure?

Common contributing factors include excessive bending, twisting, abrasion, vibration, high temperature, chemical exposure, incorrect routing, improper connections, and normal material aging.

How should a leaking hose be handled?

The equipment should be safely shut down and the applicable system pressure isolated before inspection or replacement. A damaged hose should generally be replaced rather than repaired unless an approved repair procedure specifically applies.

Why is hose routing important?

Incorrect routing can introduce tension, sharp bends, abrasion, twisting, or contact with moving and hot components. Proper routing helps reduce mechanical stress and improve service life.

Is the 3 kg value the actual hose weight?

The supplied specification identifies 3 kg as the shipping weight. It should not automatically be treated as the net component weight.

---

Conclusion

The Ingersoll Rand 47623601001 24266058 Hose is a compact industrial replacement component specified with a 12-inch hose length and 3 kg shipping weight. It is intended to provide a flexible connection within compatible Ingersoll Rand equipment and industrial air or fluid systems.

Proper hose selection is important because reliable equipment operation depends on more than physical dimensions. Connection configuration, routing, operating conditions, hose construction, pressure requirements, temperature exposure, and media compatibility must all be considered before installation.

For maintenance and spare-parts management, the complete 47623601001 / 24266058 identification should be retained. The specified 12 in length and 3 kg shipping weight are useful for identification and logistics, while the exact application characteristics should be confirmed against the host equipment and original installation.

With correct identification, installation, routing, inspection, and preventive maintenance, the Ingersoll Rand 47623601001 24266058 can serve as a practical replacement hose for compatible industrial equipment and help maintain reliable system connections.