1. Product Overview

The Ingersoll Rand 23564446 Filter Pad is an industrial filtration component identified by part number 23564446 and product reference 47555211001. Designed for use in industrial equipment filtration arrangements where the specified filter pad is required, this component supports routine maintenance and the replacement of filtration materials.

Filter pads play an important role in industrial systems by helping capture particles and contaminants from an airflow or other compatible process stream, depending on the equipment’s design. Their condition can influence filtration performance, airflow resistance, equipment cleanliness, and maintenance intervals. Selecting the correct replacement pad is therefore essential for maintaining the intended operating conditions of the associated equipment.

With dimensions of 279 × 268 × 17 mm and a listed weight of 0.1 kg, the Ingersoll Rand 23564446 Filter Pad is a lightweight component that can be incorporated into a planned maintenance program. Before installation, users should confirm the part number, dimensions, installation position, and intended application against the equipment’s requirements.

For industrial buyers, maintenance engineers, and spare-parts distributors, accurate part identification helps reduce ordering errors and supports more efficient inventory management.

2. Technical Specifications

The dimensions and weight listed above are provided for product identification and purchasing reference. Other parameters—including filtration efficiency, material composition, allowable pressure drop, operating temperature, and exact equipment compatibility—should be confirmed using the documentation for the specified part number.

3. Function and Working Principle

3.1 Particle Filtration

A filter pad is generally used to capture particles as a compatible fluid or airflow passes through its filtration material. The pad’s structure helps retain contaminants while allowing the intended medium to pass through.

The actual particle-capture performance of the Ingersoll Rand 23564446 depends on its construction and intended application. Filtration ratings should not be assumed from its dimensions alone.

3.2 Supporting Equipment Cleanliness

Contaminants entering industrial equipment can contribute to fouling, deposits, or increased maintenance requirements. Where installed as part of the designed filtration arrangement, a filter pad helps control the entry or circulation of particles.

Maintaining the correct filtration component can help preserve the cleanliness requirements of the equipment. The pad should not, however, be treated as a substitute for other filtration stages or protective devices specified by the equipment manufacturer.

3.3 Maintaining Appropriate Flow Conditions

As a filter pad collects contaminants, resistance to flow may increase. Excessive contamination, deformation, or incorrect installation can affect airflow or process conditions.

Routine inspection and timely replacement help reduce the risk of operating with an obstructed or damaged filtration component. Any acceptable pressure-drop limit or replacement threshold should be determined from the applicable equipment requirements.

4. Role in Industrial Equipment Systems

The Ingersoll Rand 23564446 Filter Pad is a small component, but correct selection and maintenance can contribute to the reliable operation of the filtration assembly in which it is installed.

4.1 Filtration System Maintenance

Industrial equipment may use multiple filtration stages to address different types or sizes of contaminants. A filter pad must be installed in the intended position to perform its assigned function.

Using the correct replacement part helps maintain the designed arrangement and reduces the risk of bypass caused by incorrect dimensions or poor seating.

4.2 Equipment Protection

In applications where the pad is designed to remove airborne particles, it can contribute to cleaner air entering the relevant equipment section. The degree of protection depends on the filter’s specified performance and the system’s overall design.

The pad’s precise role should be verified for the equipment in which it is used rather than inferred solely from the product name.

4.3 Planned Preventive Maintenance

Filter pads are suitable for inclusion in routine maintenance inspections when required by the equipment’s maintenance plan. Recording inspection dates, operating conditions, and replacement history can help maintenance teams identify recurring contamination problems and improve spare-parts planning.

4.4 Spare-Parts Inventory Management

The part number 23564446 provides an important identifier for procurement and inventory control. Because filter pads can have similar dimensions but different materials or performance characteristics, purchasing decisions should be based on the complete part number rather than size alone.

5. Industrial Applications

The specific application of the Ingersoll Rand 23564446 Filter Pad should be confirmed against the equipment’s parts list. Depending on the assembly for which it is specified, filter pads of this type may serve in industrial filtration arrangements associated with:

• Industrial air systems: Filtration of particles from compatible airflow paths.
• Compressor-related equipment: Maintenance of designated filtration sections where the pad is specified.
• Manufacturing facilities: Replacement of filtration materials during scheduled equipment servicing.
• Industrial utility systems: Filtration support in equipment designed to use a corresponding filter pad.
• Maintenance and overhaul operations: Replacement of worn, damaged, or contaminated filtration components.

These are general application categories, not confirmation that the part fits every Ingersoll Rand compressor or air-handling system. Confirm the exact equipment model and approved part reference before ordering or installing the component.

6. Installation and System Integration

Correct installation helps ensure that a replacement filter pad fits the intended housing and performs its designed function.

6.1 Verify the Replacement Part

Before installation, check the following:

• Confirm that the part number is 23564446.
• Check the listed dimensions of 279 × 268 × 17 mm.
• Inspect the pad for tears, crushing, deformation, moisture damage, or contamination.
• Confirm the required orientation and installation position using the equipment documentation.
• Check that the replacement is approved for the intended equipment and operating environment.

A visually similar filter pad should not be considered interchangeable without confirming its material, filtration characteristics, and fit.

6.2 Prepare the Equipment

Before opening the filtration assembly, follow the equipment’s isolation and safety procedures. If the assembly is associated with pressurized equipment, isolate the relevant system and release stored pressure according to the approved procedure. Allow hot components to cool before maintenance.

Wear suitable protective equipment when handling contaminated filtration materials. Avoid allowing accumulated particles to enter clean downstream areas during removal.

6.3 Remove the Existing Pad

Open the designated housing or access panel according to the equipment instructions. Remove the old pad carefully and note its installed position and orientation.

Inspect the housing, retaining features, seals, and surrounding surfaces for contamination or damage. Clean the area using an approved method that does not introduce debris into the equipment.

6.4 Install the Replacement

Position the new pad in the specified location. Ensure that it lies flat, fits within the intended seating area, and does not obstruct adjacent components.

Do not cut, fold, compress, or modify the pad unless the applicable installation instructions explicitly permit it. Incorrect placement can create gaps, restrict flow, or reduce the effectiveness of the filtration arrangement.

6.5 Complete Inspection and Restart

Reinstall the housing cover and any retaining components. Confirm that all required seals and fasteners are correctly positioned before returning the equipment to service.

Restart the equipment according to its approved procedure. Where applicable, check airflow, pressure indicators, alarms, leakage, or other operating parameters specified for the system. Record the replacement date and any abnormal conditions identified during maintenance.

7. Troubleshooting Common Problems

7.1 Reduced Airflow or Increased Resistance

Possible causes:

• The filter pad has accumulated excessive contaminants.
• The pad is incorrectly positioned.
• The replacement has unsuitable dimensions or filtration characteristics.
• Another part of the filtration system is obstructed.

Recommended actions:

1. Stop or isolate the equipment as required by the maintenance procedure.
2. Inspect the pad and housing for contamination or incorrect installation.
3. Verify that the installed part number matches the equipment requirement.
4. Inspect other relevant filtration components if the problem persists.
5. Compare operating readings with the equipment’s specified limits.

Do not assume that the filter pad is the only possible cause of reduced airflow.

7.2 Dust or Contaminants Bypassing the Filter

Possible causes:

• The pad does not seat correctly.
• The pad is torn or deformed.
• A seal or retaining component is damaged.
• The installed component is not the correct replacement.

Recommended actions:
Check the pad’s condition and fit, inspect the housing and seals, and confirm the correct part specification. Replace damaged components before returning the system to normal operation.

7.3 Frequent Filter Pad Replacement

Possible causes:

• High environmental dust levels.
• Contamination from an upstream process.
• An unsuitable maintenance interval.
• A problem elsewhere in the filtration arrangement.

Recommended actions:
Record how quickly the pad becomes contaminated and under what operating conditions. Investigate the source of contamination and review the maintenance interval using the equipment’s operating requirements. Do not extend replacement intervals beyond approved guidance simply to reduce spare-parts consumption.

7.4 Incorrect Fit During Installation

Possible causes:

• An incorrect part number was ordered.
• The dimensions or thickness do not match the required specification.
• The pad is damaged or distorted.
• The housing or retaining frame is damaged.

Recommended actions:
Stop installation if the component does not fit naturally. Recheck the part number and dimensions, inspect the mounting area, and obtain confirmation of compatibility before proceeding. Avoid forcing the pad into place.

8. Compatible System Components

The exact components used alongside the Ingersoll Rand 23564446 Filter Pad depend on the equipment assembly. The following table identifies general component categories that may be relevant during inspection and maintenance.

This table describes general filtration-system components, not a verified bill of materials for a specific machine. Confirm the actual configuration against the relevant equipment parts list.

9. Replacement and Alternative Selection

When purchasing a replacement for the Ingersoll Rand 23564446 Filter Pad, the complete part number should be the primary selection criterion.

A replacement with matching external dimensions is not necessarily equivalent. Material construction, filtration efficiency, pressure drop, environmental resistance, and sealing characteristics may differ.

For critical equipment, use the specified replacement or a formally approved equivalent. Do not substitute an unverified filter pad solely because its size and weight appear similar.

10. Key Advantages of Correct Part Selection

Accurate Spare-Part Identification

The model number 23564446 supports precise identification during procurement, inventory management, and maintenance planning.

Compact Dimensions

The listed dimensions of 279 × 268 × 17 mm provide useful reference information for checking the physical fit of the replacement.

Lightweight Design

With a listed weight of 0.1 kg, the component is easy to handle during routine maintenance, subject to the normal precautions required when working with contaminated filtration materials.

Support for Preventive Maintenance

Replacing a filter pad when required helps maintenance teams manage filtration condition and address contamination before it contributes to more significant operating problems.

Improved Procurement Accuracy

Recording the brand, full part number, dimensions, and intended equipment application helps reduce the risk of ordering an incorrect replacement.

11. Technical FAQs

Q1: What is the Ingersoll Rand 23564446 Filter Pad?

It is an industrial filter pad identified by part number 23564446, with product reference 47555211001. Its exact filtration role depends on the equipment assembly for which it is specified.

Q2: What are the dimensions of the 23564446 Filter Pad?

The listed dimensions are 279 × 268 × 17 mm.

Q3: How much does the filter pad weigh?

The listed weight is 0.1 kg.

Q4: Which equipment models use this filter pad?

The exact compatible equipment models should be confirmed using the relevant equipment parts list or approved replacement documentation. Compatibility should not be inferred from the brand name alone.

Q5: How often should the filter pad be replaced?

The replacement interval depends on operating conditions, contaminant loading, equipment requirements, and the filter’s specified service limits. Follow the applicable maintenance guidance and inspect the component at the recommended intervals.

Q6: Can the filter pad be cleaned and reused?

Reusability depends on the pad’s material and design. Do not wash, blow out, or reuse it unless the applicable maintenance instructions explicitly allow that procedure. Improper cleaning may damage the filtration material or reduce performance.

Q7: Can another filter pad with the same dimensions be used?

Not automatically. The alternative must also meet the required filtration performance, material, flow resistance, fit, and operating conditions, and must be approved for the intended application.

Q8: What should be checked before ordering the 23564446 Filter Pad?

Confirm the full part number, product reference, dimensions, equipment model, required quantity, and any applicable material or performance specifications.

12. Conclusion

The Ingersoll Rand 23564446 Filter Pad, associated with product reference 47555211001, is an industrial filtration component with listed dimensions of 279 × 268 × 17 mm and a weight of 0.1 kg. Correct part identification, appropriate installation, and routine condition checks are important for maintaining the intended performance of the filtration assembly.

For maintenance teams and industrial spare-parts buyers, confirming the complete part number and the equipment-specific requirements is the most reliable way to reduce replacement errors. Before purchasing or installing the component, verify its compatibility and technical requirements for the intended machine. This helps support effective maintenance planning, equipment cleanliness, and dependable industrial operation.