ProductPRODUCT
Featured products
Contact Us
- GE
- IC200UEX014
- VersaMax Miniature Expansion Module
- USA
- 95 x 90 x 76 mm
- 0.16 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 8
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The GE IC200UEX014 VersaMax Miniature Expansion Module is a compact expansion component intended for use in compatible GE VersaMax industrial automation systems. Expansion modules provide a practical way to increase system capability while retaining the existing control architecture.
In a modular PLC system, expansion hardware can be used to accommodate additional system requirements without replacing the complete controller. Depending on the application, an expansion arrangement can support additional I/O, interfaces, communication resources, or other control-system functions.
The supplied product information identifies the GE IC200UEX014 as a VersaMax Miniature Expansion Module, with dimensions of 95 × 90 × 76 mm and a weight of 0.16 kg.
Product Information
- Manufacturer: GE
- Product Family: VersaMax
- Model: IC200UEX014
- Product Type: Miniature Expansion Module
- Dimensions: 95 × 90 × 76 mm
- Weight: 0.16 kg
- Application: Industrial Automation
- System Role: Expansion Component
- Architecture: Modular PLC System
The IC200UEX014 should be installed only in a compatible VersaMax configuration. Before installation, verify the controller, expansion architecture, power arrangement, module position, and application configuration.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE |
| Product Family | VersaMax |
| Model Number | IC200UEX014 |
| Product Type | Miniature Expansion Module |
| Dimensions | 95 × 90 × 76 mm |
| Weight | 0.16 kg |
| Application | Industrial Automation |
| System Role | Expansion |
| Architecture | Modular Control System |
| Installation | VersaMax Control System |
| Maintenance | Installation / Commissioning / Troubleshooting |
The dimensions and weight above follow the product information supplied.
Function and Working Principle
The IC200UEX014 operates as an expansion component within a compatible VersaMax control architecture.
A simplified architecture is:
Main VersaMax Controller
↓
Expansion Interface
↓
IC200UEX014
↓
Additional Control-System Resources
The expansion arrangement allows the overall control system to be organized into modular sections.
A properly designed expansion system can simplify:
- System expansion
- Machine upgrades
- Additional I/O integration
- Control-panel modifications
- Equipment modernization
- Hardware replacement
- Maintenance
The exact system function depends on the complete VersaMax architecture. The controller, expansion interfaces, power modules, I/O modules, communication equipment, and software configuration should therefore be considered together.
Role in Industrial Control Systems
The IC200UEX014 can form part of a modular control structure connecting the main processor with additional automation hardware.
A typical architecture can be represented as:
Field Sensors
↓
VersaMax I/O
↓
Main Controller
↓
Expansion Architecture
↓
IC200UEX014
↓
Additional Modules
↓
Machine / Process Equipment
This modular arrangement can be particularly useful when a machine requires additional functions after the original control system has been designed.
Industrial Applications
Machine Automation
The IC200UEX014 can be used as part of a compatible VersaMax expansion architecture in machine-control applications.
Manufacturing Equipment
Modular expansion allows control systems to accommodate additional equipment and process functions.
Packaging Systems
Packaging machinery can benefit from scalable control architecture when additional control functions are required.
Conveyor and Material Handling
Material-handling systems often require expandable control architectures as conveyor sections and sensors are added.
OEM Machinery
Machine builders can use modular VersaMax architectures to create scalable control panels.
Process Equipment
Expansion hardware can be useful when additional automation functions are integrated into an existing process-control system.
Installation Guide
1. Verify the Model
Confirm the complete model number before installation:
GE IC200UEX014
VersaMax Miniature Expansion Module
Do not substitute another VersaMax module solely because it has a similar physical size.
2. Review the Control Architecture
Before installation, identify:
- Main controller
- Existing expansion modules
- Power supply
- I/O modules
- Communication modules
- Expansion interfaces
- Module positions
- Hardware configuration
- Application program
This information should be documented before making changes to an operating system.
3. Back Up the Application
Before installing or replacing an expansion module, preserve the existing system configuration.
Back up or record:
- PLC program
- Hardware configuration
- I/O configuration
- Communication settings
- System parameters
- Machine-specific settings
A verified backup provides a recovery point if the modified system does not start correctly.
4. Place the Machine in a Safe State
Before performing installation work:
- Stop automatic operation.
- Identify all connected equipment.
- Place machinery in a safe condition.
- Isolate hazardous energy as required.
- Follow approved lockout/tagout procedures.
- Verify that unexpected movement cannot occur.
5. Inspect the IC200UEX014
Before installation, inspect the module for:
- Cracked housing
- Damaged connectors
- Bent terminals
- Corrosion
- Contamination
- Mechanical impact
- Loose components
Do not install a damaged component.
6. Check Mounting Requirements
The supplied dimensions are:
95 × 90 × 76 mm
Provide additional cabinet space for:
- Adjacent modules
- Wiring
- Connectors
- Maintenance access
- Ventilation
- Cable routing
The physical dimensions of the module should not be treated as the minimum required cabinet clearance.
7. Verify Compatibility
Before connecting the IC200UEX014, confirm compatibility with:
- Main VersaMax controller
- Expansion architecture
- Power supply
- Adjacent modules
- Hardware configuration
- Application software
A physically compatible connector does not necessarily mean that two modules are functionally interchangeable.
8. Install the Module
Install the IC200UEX014 in the intended VersaMax expansion position.
Verify:
- Correct orientation
- Correct position
- Secure mechanical installation
- Proper connector alignment
- Full engagement
- No excessive mechanical stress
Never force a connector or module into position.
9. Inspect the Complete Assembly
After installation, inspect:
- Expansion interfaces
- Adjacent modules
- Power connections
- Communication connections
- Field wiring
- Mechanical mounting
Make sure no wiring has been displaced during installation.
Commissioning Procedure
Step 1 — Visual Inspection
Check the module and surrounding equipment.
Step 2 — Verify Installation
Confirm secure mechanical and electrical connections.
Step 3 — Check Power
Verify that the control system has stable power.
Step 4 — Verify Hardware Configuration
Compare the physical hardware with the intended system configuration.
Step 5 — Check Controller Status
Confirm that the main controller starts normally.
Step 6 — Check Expansion Recognition
Verify that the installed expansion hardware is recognized correctly.
Step 7 — Test Associated Modules
Confirm that connected I/O and other expansion resources operate as expected.
Step 8 — Test Communication
Where applicable, verify communication with connected devices.
Step 9 — Run Application Tests
Execute controlled machine or process sequences.
Step 10 — Return to Service
Restore normal automatic operation after all checks are complete.
Troubleshooting Guide
Problem 1: IC200UEX014 Is Not Recognized
Possible causes include:
- Incorrect module installation
- Poor connector engagement
- Incorrect configuration
- Incompatible controller
- Power problem
- Module fault
Recommended Checks
- Confirm the model number.
- Inspect the module installation.
- Check connectors.
- Verify power.
- Compare physical and software configuration.
- Review controller diagnostics.
Problem 2: Controller Reports a Configuration Error
A configuration error may occur when the physical system does not correspond to the expected configuration.
Check:
- Module model
- Module position
- Expansion arrangement
- Controller configuration
- Application settings
Correct the mismatch before continuing commissioning.
Problem 3: Expansion Hardware Is Not Available
If associated expansion functions cannot be accessed, check:
- Expansion interface
- IC200UEX014 installation
- Connected modules
- Power supply
- Controller status
- Hardware configuration
Troubleshoot the common system elements first.
Problem 4: Intermittent Module Fault
Possible causes include:
- Loose connector
- Mechanical vibration
- Power instability
- Electrical interference
- Excessive temperature
- Contamination
- Mechanical stress
Inspect the physical installation before replacing hardware.
Problem 5: Several Modules Stop Working
When multiple modules become unavailable at the same time, investigate shared system components.
Check:
- Power supply
- Controller
- Expansion interface
- Common connections
- Hardware configuration
A common system fault is more likely than simultaneous failure of several independent modules.
Problem 6: Controller Fault Appears After Installation
If the controller develops a fault immediately after installing the IC200UEX014, check:
- Module compatibility
- Module position
- Hardware configuration
- Connector engagement
- Power system
- Expansion architecture
Compare the system with its previous known-good configuration.
Problem 7: Replacement Module Does Not Operate
Check:
- Exact model number
- Installation orientation
- Module position
- Connector engagement
- Controller compatibility
- Hardware configuration
- Power condition
Only after these checks should the replacement module itself be considered suspect.
Problem 8: System Becomes Unstable After Expansion
Potential causes include:
- Incorrect configuration
- Power limitations
- Electrical interference
- Communication problems
- Expansion architecture issues
- Environmental conditions
Document which functions become unstable and whether the problem occurs continuously or intermittently.
Problem 9: Fault Remains After Replacement
If a replacement IC200UEX014 does not resolve the problem, investigate:
- Main controller
- Power supply
- Expansion interface
- Adjacent modules
- Communication equipment
- Application configuration
- Field wiring
- Environmental conditions
This prevents unnecessary replacement of functioning hardware.
Diagnostic Strategy
A systematic diagnostic sequence is:
Power Supply
↓
Main Controller
↓
Expansion Interface
↓
IC200UEX014
↓
Connected Modules
↓
Field Equipment
For configuration faults:
Physical Hardware
↔
Software Configuration
For intermittent faults:
Connections
→ Power
→ Environment
→ Electrical Noise
→ Communication
→ Application
This approach helps technicians isolate faults systematically.
Module Replacement Procedure
Phase 1 — Preparation
- Confirm GE IC200UEX014.
- Verify the replacement module.
- Back up the application.
- Record the hardware configuration.
- Document module positions.
- Identify affected equipment.
- Place the machine in a safe state.
Phase 2 — Removal
- Stop the control system.
- Isolate power as required.
- Verify safe conditions.
- Disconnect applicable interfaces.
- Remove the existing module carefully.
Phase 3 — Installation
- Inspect the replacement IC200UEX014.
- Confirm the model number.
- Align the module correctly.
- Install it securely.
- Reconnect interfaces.
- Inspect adjacent connections.
Phase 4 — Configuration
- Verify the physical hardware.
- Check controller configuration.
- Confirm module position.
- Verify applicable communication settings.
- Review system diagnostics.
Phase 5 — Commissioning
- Restore power.
- Check controller startup.
- Check module status.
- Verify expansion recognition.
- Test associated hardware.
- Test application functions.
- Monitor system operation.
- Return the machine to service.
Preventive Maintenance
| Maintenance Item | Recommended Action |
|---|---|
| IC200UEX014 | Inspect physical condition |
| Mounting | Verify secure installation |
| Connectors | Check engagement |
| Power Supply | Verify stable operation |
| Expansion Interface | Inspect connections |
| Adjacent Modules | Check alignment |
| Communication | Inspect applicable connections |
| Cabinet | Keep clean and dry |
| Grounding | Verify system arrangement |
| Application | Maintain verified backup |
| Configuration | Document changes |
| Diagnostics | Review recurring faults |
Environmental Considerations
Temperature
Maintain the control cabinet within the appropriate environmental conditions for the installed system.
Dust
Prevent excessive dust accumulation around the control equipment.
Moisture
Protect the module from condensation and excessive humidity.
Vibration
Avoid excessive vibration that could loosen connectors or mounting components.
Electrical Noise
Keep control wiring and communication wiring appropriately separated from high-current switching circuits, motors, drives, and contactors.
Common Installation Mistakes
Incorrect Model Identification
Do not install a similar-looking VersaMax module without confirming the complete model number.
Incorrect Module Position
The module must be installed in the appropriate expansion architecture and position.
Loose Connections
Poor connector engagement can cause intermittent faults.
Configuration Mismatch
The physical system and controller configuration must correspond.
Insufficient Cabinet Clearance
The module measures 95 × 90 × 76 mm, but additional space should be provided for wiring, ventilation, and maintenance.
Replacing Hardware Without a Backup
Always preserve the application and configuration before modifying the control system.
Key Advantages
- VersaMax modular architecture
- Compact miniature expansion design
- Suitable for compatible industrial automation systems
- Supports scalable control-system architecture
- Simplifies modular system expansion
- Facilitates maintenance and replacement
- Suitable for machine-control applications
- Suitable for OEM equipment
- Compact dimensions of 95 × 90 × 76 mm
- Supplied weight of 0.16 kg
Technical FAQs
What is the GE IC200UEX014?
The GE IC200UEX014 is identified as a VersaMax Miniature Expansion Module for use within a compatible GE VersaMax industrial automation architecture.
What is the purpose of IC200UEX014?
Its purpose is to provide expansion capability within a compatible VersaMax control system.
What are the dimensions of IC200UEX014?
The supplied dimensions are 95 × 90 × 76 mm.
What is the weight of IC200UEX014?
The supplied weight is 0.16 kg.
Why is IC200UEX014 not recognized?
Check the module installation, connector engagement, power supply, controller compatibility, hardware configuration, and controller diagnostics.
Can a configuration mismatch cause an expansion fault?
Yes. If the physical hardware does not match the configured system, the controller may report a configuration or hardware fault.
Why does the expansion system operate intermittently?
Check connectors, mounting, power stability, vibration, temperature, electrical interference, and communication connections.
Should the module be replaced immediately after a fault?
No. First verify power, connections, configuration, controller status, expansion interfaces, and connected modules.
What should be backed up before replacement?
Preserve the controller application, hardware configuration, I/O configuration, communication settings, and other applicable system parameters.
How should an IC200UEX014 fault be diagnosed?
Start with power and the main controller, then inspect the expansion interface, module installation, configuration, connected modules, and field equipment.
Can a faulty expansion interface make a good IC200UEX014 appear defective?
Yes. A problem in the interface or surrounding control architecture can prevent a properly functioning module from being recognized.
Why do several modules fail simultaneously?
If several modules become unavailable together, investigate shared power, controller status, expansion interfaces, and common connections before replacing individual modules.
Conclusion
The GE IC200UEX014 VersaMax Miniature Expansion Module is a compact component designed to support expansion within compatible GE VersaMax industrial automation systems. The supplied product information specifies dimensions of 95 × 90 × 76 mm and a weight of 0.16 kg.
Proper installation requires accurate model identification, system compatibility verification, secure mechanical and electrical connections, correct hardware configuration, and stable control-system power.
During commissioning, technicians should verify the physical system against the intended configuration, confirm controller recognition, inspect connected modules, and test the complete application under controlled conditions.
For troubleshooting, the most effective approach is to work systematically from the power supply and main controller through the expansion interface, IC200UEX014, connected modules, configuration, communication paths, and field equipment.
By applying structured installation, commissioning, preventive-maintenance, and fault-diagnosis procedures, maintenance personnel can reduce unnecessary hardware replacement and improve the reliability of VersaMax-based industrial control systems.