Product Overview

The Ingersoll Rand 47560113001 39218193 High Temperature Grease is an industrial lubrication product associated with Ingersoll Rand motor maintenance. Its lubricant reference, 39218193, is identified as high-temperature motor grease and is used for specified electric motor bearing lubrication applications in compressed-air equipment.

Lubrication is essential to the reliable operation of rotating machinery. Electric motor bearings operate under continuous mechanical loads and rotational movement. Without suitable lubrication, friction and heat can increase, potentially accelerating bearing wear and affecting equipment reliability.

The 39218193 grease is associated with Mobilith SHC 220. Available product information identifies this lubricant as a synthetic, lithium-complex grease in NLGI Grade 2. Its characteristics make it suitable for specified industrial bearing applications, subject to the equipment manufacturer’s lubrication requirements.

This product should not be treated as a universal compressor lubricant. Grease used for motor bearings has a different purpose from compressor oil, coolant, and other lubricants used in an air compressor system. Selecting the correct formulation and applying the specified quantity are important for maintaining bearing performance.

The complete designation supplied for this listing is 47560113001 39218193. Since the precise relationship between the two references requires confirmation against the original package label or parts documentation, buyers should verify the complete part number before ordering.

Technical Specifications

Note: The lubricant identity is associated with reference 39218193. Verify the actual container label, package configuration, and current technical data sheet before relying on detailed performance specifications or ordering by the combined reference.

Function and Working Principle

High-temperature grease provides a lubricating film between moving mechanical surfaces. In electric motor applications, it helps reduce friction between bearing rolling elements and raceways while supporting reliable operation under specified mechanical and thermal conditions.

1. Motor Bearing Lubrication

Electric motor bearings support the rotating shaft and help maintain its position during operation. The bearing elements move continuously under load, creating friction at their contact surfaces.

A suitable grease forms a lubricating film that helps reduce direct metal-to-metal contact. This supports smoother bearing movement and helps limit mechanical wear.

The 39218193 lubricant is identified for specified Ingersoll Rand motor lubrication requirements. Its use should follow the motor’s lubrication instructions rather than a general-purpose maintenance schedule.

2. Friction and Wear Reduction

Friction between bearing components can contribute to heat generation and material wear. Correct grease selection helps maintain lubrication at the contact surfaces and supports stable bearing operation.

The effectiveness of lubrication depends on grease compatibility, operating speed, bearing design, temperature, and the quantity applied.

3. Thermal Stability

Industrial motor bearings may operate under elevated temperatures, particularly in equipment designed for continuous operation. A suitable high-temperature grease must maintain its lubricating properties within the specified operating range.

The associated Mobilith SHC 220 formulation is designed for demanding bearing-lubrication conditions. However, the actual permitted temperature range and relubrication requirements should be checked against the current product data sheet and motor documentation.

4. Corrosion and Oxidation Protection

Grease can help protect bearing surfaces by maintaining a lubricating layer and limiting exposure to contaminants and moisture under suitable operating conditions.

The protection achieved depends on the lubricant formulation, storage condition, sealing arrangement, and operating environment.

5. Support for Preventive Maintenance

Using the correct lubricant as part of scheduled maintenance helps maintenance teams manage bearing lubrication systematically.

Keeping the specified grease available can reduce the risk of unapproved substitutions and help ensure that servicing follows the equipment manufacturer’s requirements.

Role in Industrial Compressor Maintenance

Ingersoll Rand compressors contain several systems that require different maintenance materials. Motor bearings, air ends, filters, valves, and other components may have separate lubrication and service requirements.

The 39218193 grease is associated with motor lubrication rather than general compressor coolant or air-end lubricant.

Motor Bearing Maintenance

Motor bearings require suitable lubrication to support smooth shaft rotation. The correct grease and application quantity depend on the motor design and bearing arrangement.

Maintenance personnel should check the motor’s lubrication nameplate and service documentation before applying grease.

Compressor Reliability

The compressor motor is a major component in the compressed-air system. Bearing problems can contribute to vibration, abnormal noise, elevated temperature, and unexpected downtime.

Using the specified grease as part of an appropriate maintenance program helps support reliable motor operation.

Planned Service Activities

Grease replacement or replenishment should be performed according to the equipment manufacturer’s maintenance instructions. The correct service interval may depend on motor speed, operating temperature, bearing type, and working conditions.

Maintenance Inventory Management

Maintaining the correct part reference helps distinguish motor grease from other compressor lubricants. This is particularly important for facilities that manage several compressor models and different lubrication specifications.

Industrial Applications

1. Rotary Screw Air Compressors

Rotary screw compressors rely on electric motors to drive the compressor element. The motor bearings require appropriate lubrication to support continuous operation.

The 39218193 grease may be used where the applicable Ingersoll Rand motor documentation specifies this lubricant.

2. Industrial Electric Motors

Industrial electric motors operate in manufacturing facilities, processing plants, and compressed-air installations. Bearing lubrication is an important part of their preventive maintenance.

The correct grease must be selected according to the motor manufacturer’s specifications and operating conditions.

3. Compressor Motor Bearing Maintenance

Motor bearing servicing may be included in planned compressor maintenance activities. Using the specified lubricant helps maintain consistency between service procedures and the equipment’s original lubrication requirements.

4. Continuous-Duty Equipment

Some industrial compressors operate for extended periods under relatively stable loads. Their motors may accumulate substantial operating hours between maintenance shutdowns.

Correct grease selection and application can help support bearing reliability during these operating cycles.

5. Industrial Maintenance Workshops

Maintenance departments may keep approved lubricants in inventory for scheduled motor servicing and equipment repairs. Clear part-number identification helps reduce the possibility of using an incompatible grease.

Installation and Lubrication Guidelines

Grease application should be performed by qualified maintenance personnel using the procedures specified for the motor or compressor.

1. Confirm the Lubricant Specification

Before applying the grease, verify that 39218193 is specified for the motor being serviced.

Do not assume that all Ingersoll Rand compressors use the same motor grease. Requirements can differ according to motor manufacturer, electrical frequency, bearing design, and equipment configuration.

2. Check the Motor Lubrication Label

The motor may have a lubrication nameplate identifying the required grease and maintenance information.

Follow the information on the motor label and the applicable maintenance documentation. If the specified grease differs from 39218193, do not substitute without confirmation from the equipment manufacturer.

3. Prepare the Lubrication Equipment

Use clean grease guns, dispensing tools, and fittings. Contamination from dust, moisture, old grease, or other lubricants can affect bearing performance.

Keep the grease container sealed when it is not being used.

4. Apply the Correct Quantity

Overgreasing can increase bearing friction and temperature. Excess grease may also cause leakage or interfere with the bearing’s normal operation.

Apply only the quantity specified by the motor manufacturer. Do not use additional grease simply because the equipment has operated for a long period.

5. Follow Safe Maintenance Procedures

Before servicing motor bearings, isolate the equipment from its power supply and follow the required lockout and tagout procedures.

Allow components to reach a safe temperature where necessary. Maintenance personnel should use appropriate protective equipment and follow the compressor manufacturer’s service instructions.

6. Record Lubrication Activities

Record the grease reference, service date, applied quantity, and equipment identification. This information helps maintenance teams track bearing service history and identify recurring problems.

Compatible System Components

The 39218193 grease is a maintenance material rather than an electrical or mechanical control module. Its compatibility is determined by the lubrication requirements of the equipment being serviced.

The table identifies equipment and maintenance items associated with motor lubrication. It does not mean that these components are included with the grease.

Alternative Lubricants and Replacement Considerations

The 39218193 reference is associated with Mobilith SHC 220. Although other industrial greases may have similar descriptions, they should not automatically be considered interchangeable.

Before substituting another lubricant, evaluate:

• Base oil type and viscosity.
• Thickener chemistry.
• NLGI consistency grade.
• Operating temperature range.
• Bearing speed and mechanical load.
• Water and contamination resistance.
• Compatibility with residual grease.
• Motor manufacturer’s approval.

A grease with the same NLGI grade may still have different base oil and thickener characteristics. Mixing incompatible products can cause changes in consistency and lubrication performance.

Key Advantages

Specified Motor Lubrication

The 39218193 reference provides a clear lubricant identification for applicable Ingersoll Rand motor maintenance requirements.

High-Temperature Grease Formulation

The associated lubricant is designed for bearing applications involving demanding thermal conditions within its specified operating range.

Bearing Wear Management

A suitable grease film helps reduce friction and wear at bearing contact surfaces when the lubricant is correctly selected and applied.

Support for Preventive Maintenance

Keeping the correct grease available helps maintenance teams carry out scheduled servicing according to equipment requirements.

Clear Spare-Parts Identification

The lubricant reference helps distinguish motor grease from compressor oil, coolant, and other maintenance materials.

Industrial Equipment Compatibility

The product is associated with Ingersoll Rand compressed-air equipment maintenance where the applicable motor documentation specifies 39218193.

Technical FAQs

1. What is Ingersoll Rand 47560113001 39218193?

The supplied designation identifies an Ingersoll Rand product listing associated with 39218193 high-temperature motor grease. The precise relationship between 47560113001 and the grease reference should be verified against the original package or parts documentation.

2. What is Ingersoll Rand 39218193 used for?

It is identified as high-temperature motor grease used for specified electric motor bearing lubrication applications in Ingersoll Rand equipment.

3. Is 39218193 associated with Mobilith SHC 220?

Yes. Available product information associates 39218193 with Mobilith SHC 220. Verify the actual container label and current lubricant documentation before use.

4. What type of grease is Mobilith SHC 220?

Available lubricant information identifies it as a synthetic hydrocarbon-based, lithium-complex grease with NLGI Grade 2 consistency.

5. Can 39218193 be used in every Ingersoll Rand compressor?

No. Lubrication requirements can vary according to compressor model and motor configuration. Always check the applicable motor lubrication label and maintenance instructions.

6. Can this grease replace compressor coolant?

No. Motor grease and compressor coolant perform different functions. The 39218193 reference is associated with motor grease and should not be used as a substitute for compressor coolant or air-end lubricant.

7. Can it be mixed with another grease?

Do not mix it with another grease unless compatibility has been confirmed. Different base oils and thickener systems may be incompatible.

8. How often should the grease be applied?

The service interval depends on motor design, bearing type, operating speed, temperature, and duty cycle. Follow the motor manufacturer’s maintenance schedule.

9. What happens if too much grease is applied?

Overgreasing may increase bearing temperature, create excess churning resistance, and cause grease leakage. Apply only the quantity specified by the manufacturer.

10. What should be checked before purchasing?

Confirm the complete product reference, container label, lubricant designation, package size, condition, and compatibility with the intended motor. For critical equipment, request the applicable lubricant documentation.

Procurement and Maintenance Recommendations

When purchasing Ingersoll Rand 47560113001 39218193 High Temperature Grease, verify the complete designation and confirm that the 39218193 lubricant matches the motor’s required grease specification.

The product reference should be checked against the original packaging, equipment parts documentation, or supplier confirmation. This is particularly important when a listing contains more than one reference number.

For storage, keep the grease in its original sealed container in a clean, dry environment. Follow the manufacturer’s storage and shelf-life instructions. Avoid exposing the lubricant to dust, moisture, or other contaminants.

During maintenance, use clean dispensing equipment and record the lubricant quantity and service date. Do not mix unverified grease types or apply additional grease without checking the motor’s service instructions.

The supplied dimensions of 95 × 95 × 80 mm and weight of 0.40 kg should be verified against the actual package before shipping. Net product weight and gross shipping weight may differ.

Conclusion

The Ingersoll Rand 47560113001 39218193 High Temperature Grease is listed as an industrial lubrication product associated with Ingersoll Rand motor maintenance. The 39218193 reference is identified as high-temperature motor grease and is associated with Mobilith SHC 220.

Correct grease selection and application are important for motor bearing reliability, friction control, and preventive maintenance. Before using the product, confirm the required lubricant against the motor nameplate and applicable equipment documentation.

For industrial spare-parts procurement, retaining the complete reference and verifying the actual package label helps ensure that the correct lubricant is supplied for the intended maintenance application.