Product Overview

The Ingersoll Rand 24900458 Oil Filter Element is a replacement filtration component designed for compatible industrial air compressor systems. It is also described in product references as a coolant filter element. Its primary function is to remove contaminants from the circulating lubricant or coolant within the compressor system, helping maintain fluid cleanliness and protect internal components.

In industrial rotary screw air compressors, lubricant plays several important roles. It reduces friction between moving components, helps remove heat generated during compression, and contributes to sealing within the compression chamber. During normal operation, the circulating fluid can collect dust, wear particles, oxidation products, and other impurities. Without effective filtration, these contaminants may circulate through the system and contribute to premature component wear or reduced operating reliability.

The 24900458 filter element is designed to capture suspended particles as fluid passes through its filtration media. Regular replacement helps maintain suitable fluid circulation and reduces the risk of excessive filter restriction.

This part number is listed for selected Ingersoll Rand compressor models, including certain RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie configurations. Compatibility should be confirmed against the compressor model and serial number before ordering.

The supplied product dimensions are 118 × 118 × 364 mm, and the listed weight is 2.54 kg. These specifications are useful for product identification, purchasing, inventory management, and shipping preparation.

The additional reference number 47639434001 should be treated separately. It is identified in available parts information as a maintenance kit number rather than the individual 24900458 filter element. Buyers should confirm the contents of any kit before ordering.

Technical Specifications

Specifications are based on the supplied product information and available product references. Confirm the exact part number, filter design, and maintenance interval using the compressor’s serial-number-specific documentation.

Function and Working Principle

The 24900458 filter element works as part of the compressor’s fluid filtration circuit. Its purpose is to retain contaminants while allowing the required fluid flow through the system.

1. Contaminant Removal

During compressor operation, the circulating fluid may collect fine particles from internal wear, environmental contamination, and fluid degradation. The filter media captures these particles as the fluid passes through the element.

This filtration process helps prevent contaminants from repeatedly circulating through sensitive components.

2. Maintaining Fluid Cleanliness

Clean lubricant is important for reliable compressor operation. Contaminated fluid may contribute to increased friction, deposits, and wear.

The 24900458 filter element supports fluid cleanliness by retaining particles within its filtration media. Its performance depends on the condition of the element, the fluid characteristics, and the operating requirements of the compressor.

3. Supporting Fluid Circulation

The filter must provide sufficient flow for the compressor’s lubrication or coolant circuit. As contaminants accumulate, the filter may become increasingly restricted.

Replacing the element at the specified maintenance interval helps reduce the possibility of excessive pressure drop and inadequate fluid circulation.

4. Protecting Compressor Components

The filtration system helps reduce the amount of abrasive contamination reaching internal compressor components. This can support the service life of bearings, lubricated surfaces, and other components that depend on clean circulating fluid.

The filter is one part of the overall compressor maintenance system. Proper fluid selection, regular inspection, and correct operating conditions are also necessary.

Role in Industrial Air Compressor Systems

The 24900458 filter element is used within the fluid-management system of compatible Ingersoll Rand compressors. Its function is closely related to the compressor’s lubrication, cooling, and preventive maintenance arrangements.

Compressor Lubrication Circuit

In lubricated compressor systems, oil circulates through designated passages and components. It helps reduce friction and carries heat away from operating parts.

The filter element removes suspended contamination from the circulating fluid, helping maintain the required cleanliness for continued operation.

Compressor Cooling Support

In certain compressor designs, the circulating fluid also contributes to temperature management. Contaminated or restricted fluid can affect system performance.

Maintaining a clean filter helps support the intended circulation conditions, although overall cooling performance also depends on the oil cooler, airflow, fluid level, and other system components.

Preventive Maintenance

The filter is a consumable component that should be included in the compressor’s preventive maintenance schedule.

Maintenance personnel should record operating hours, replacement dates, and any abnormal operating conditions. This information helps identify recurring contamination problems and supports more consistent maintenance planning.

Equipment Reliability

A correctly selected and maintained filter can help reduce contamination-related problems. It should always be used with the correct compressor configuration and compatible fluid specifications.

Industrial Applications

The Ingersoll Rand 24900458 is listed for selected industrial compressor installations. Its application is not determined by physical dimensions alone; the correct filter must also match the compressor’s internal connections and filtration requirements.

1. Manufacturing Facilities

Manufacturing plants use compressed air for pneumatic tools, automated machinery, material handling, and production equipment.

In these environments, compressor reliability is important for maintaining production continuity. The 24900458 filter element can support the maintenance of compatible compressor fluid circuits.

2. Automotive Production

Automotive factories use compressed air for assembly equipment, pneumatic tools, and various automated production processes.

Regular compressor maintenance helps reduce the risk of unexpected equipment interruptions. Replacing the appropriate filter element according to the manufacturer’s schedule is part of this maintenance work.

3. Industrial Processing Plants

Process industries may depend on compressed air for actuators, valves, instrumentation, and auxiliary machinery.

A properly maintained compressor lubrication system helps support stable equipment operation. Filter replacement should be coordinated with the plant’s maintenance program.

4. Packaging and Material Handling

Packaging lines and material-handling equipment often use pneumatic cylinders, actuators, and control devices.

Reliable compressed-air generation is important for consistent machine operation. Maintaining the compressor’s filtration system can help reduce maintenance-related interruptions.

5. General Industrial Compressor Installations

The filter may be used in compatible Ingersoll Rand compressor installations across different industrial sectors. Before use, verify the exact compressor model, serial number, and required replacement part number.

Installation and Replacement Guidelines

Correct installation is essential for filtration performance and compressor reliability. The following procedures provide a general maintenance overview. Always follow the instructions for the specific compressor model.

1. Verify the Part Number

Before removing the existing element, confirm that 24900458 is the correct replacement part.

Check the compressor model, serial number, existing filter identification, and parts documentation. Do not rely exclusively on the filter’s external dimensions because connection details and internal filtration characteristics may differ.

2. Shut Down and Isolate the Compressor

Stop the compressor using the recommended shutdown procedure. Isolate the electrical supply and allow the equipment to cool as required.

Follow all pressure-relief and lockout procedures before opening the fluid circuit. Never remove a filter while the system is pressurized or at an unsafe temperature.

3. Remove the Existing Filter

Prepare a suitable container and absorbent materials to collect residual fluid.

Remove the existing filter using the recommended service method. Inspect the housing, sealing surface, and surrounding components for damage, contamination, or abnormal deposits.

4. Inspect the Replacement Element

Compare the new element with the removed filter. Check the part number, dimensions, connection arrangement, and sealing surfaces.

Make sure the replacement is clean and undamaged before installation. Do not install a filter that has been exposed to contamination or has damaged sealing components.

5. Install the New Filter

Install the replacement element according to the compressor manufacturer’s instructions.

Follow the specified tightening procedure. Excessive tightening can damage the seal or housing, while insufficient tightening may result in leakage.

6. Restart and Check Operation

Restore the system according to the compressor’s restart procedure.

Inspect the filter area for leaks and observe the compressor’s operating indicators. Check for abnormal temperature, pressure, or filter-related alarms.

If abnormal conditions appear, stop the equipment and investigate before returning it to normal service.

Compatible System Components

The 24900458 filter element operates as part of a larger compressor system. The following components may be found in a compatible installation.

These components are listed for system context. They are not necessarily included with the 24900458 filter element.

Alternative Models and Replacement Considerations

When replacing the 24900458, verify the exact OEM part number and compressor compatibility. A filter with similar dimensions may not have the same filtration characteristics or connection design.

Cross-reference information should be treated as a starting point for identification rather than automatic approval for substitution. For critical compressor installations, use the manufacturer’s confirmed replacement part or obtain written compatibility confirmation from the supplier.

Key Advantages

Effective Fluid Filtration

The filter element captures suspended contaminants from the compressor’s circulating fluid, helping maintain suitable fluid cleanliness.

Support for Internal Component Protection

Reducing the circulation of abrasive particles can help limit contamination-related wear in compressor components.

Preventive Maintenance Compatibility

The replaceable element can be incorporated into scheduled compressor servicing, allowing maintenance teams to manage consumables and operating hours.

Application in Selected Ingersoll Rand Compressors

The 24900458 is listed for selected RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie compressor configurations. Final compatibility must be confirmed against the equipment serial number.

Practical Spare-Part Identification

The part number and physical dimensions help maintenance teams identify the required element for purchasing, storage, and inventory management.

Technical FAQs

1. What is the Ingersoll Rand 24900458?

The 24900458 is a replacement filter element for selected Ingersoll Rand industrial air compressors. It is described in available product references as an oil or coolant filter element.

2. What is the main function of this filter?

Its main function is to remove suspended contaminants from the compressor’s circulating fluid. This helps maintain fluid cleanliness and reduce contamination-related wear.

3. Which compressors use the 24900458?

Available product references list selected RS90ie, RS110ie, RS132i, RS132ie, RS160i, and RS160ie models. Confirm the exact fit using the compressor model and serial number.

4. What are the dimensions of the 24900458?

The supplied dimensions are 118 × 118 × 364 mm. Verify the actual product and its connection details before installation.

5. What is the weight of the filter element?

The supplied product weight is 2.54 kg. Packaging and shipping weight may differ.

6. How often should the filter be replaced?

Some product references indicate a replacement interval of approximately 4,000 operating hours or six months. The correct interval depends on the compressor model, operating environment, fluid condition, and manufacturer’s maintenance instructions.

7. What happens if the filter is not replaced?

As contaminants accumulate, filter restriction may increase. This can affect fluid circulation and may contribute to abnormal operating conditions or increased component wear.

8. Is the 24900458 an air intake filter?

No. It is identified as an oil or coolant filter element. It should not be confused with the compressor’s intake-air filter or an external compressed-air line filter.

9. Is 47639434001 the same product as 24900458?

Available parts information identifies 47639434001 as a maintenance kit reference rather than the individual 24900458 filter element. Confirm the kit’s contents and the required filter number before ordering.

10. Can an aftermarket filter replace the original element?

An aftermarket filter may be suitable if its dimensions, thread, sealing arrangement, filtration performance, and flow capacity meet the original equipment requirements. Verify compatibility before installation.

Procurement and Maintenance Recommendations

When purchasing the Ingersoll Rand 24900458, begin by confirming the part number against the compressor’s service documentation. The RS compressor family includes different configurations, so the equipment serial number is important when identifying the correct replacement.

For procurement, request clear photographs of the product label, filter connections, and packaging. Confirm whether the supplied item is genuine OEM or an aftermarket replacement. If a cross-reference is offered, request its technical specifications and compatibility documentation.

The distinction between an individual filter and a complete maintenance kit should also be checked. The reference 47639434001 should not be described as the same individual filter unless the supplier provides documentation establishing that relationship.

During maintenance, record the filter replacement date and compressor operating hours. Inspect for leakage and monitor relevant operating indicators after installation. If the filter becomes restricted unusually quickly, investigate possible contamination sources, lubricant condition, and operating environment.

For facilities operating multiple compressors, maintaining accurate spare-parts records can help prevent ordering errors and reduce service delays. Store replacement elements in clean, dry conditions and protect them from damage before installation.

Conclusion

The Ingersoll Rand 24900458 Oil Filter Element is a replacement filtration component for selected industrial air compressor systems. By removing contaminants from circulating lubricant or coolant, it supports fluid cleanliness and helps protect internal compressor components.

With supplied dimensions of 118 × 118 × 364 mm and a weight of 2.54 kg, the element can be identified for spare-parts purchasing and inventory management. Compatibility should be confirmed using the compressor model and serial number.

The additional reference 47639434001 is identified separately as a maintenance kit number in available parts information. Keeping the individual filter number distinct from the maintenance kit reference helps ensure accurate product identification and procurement.