ProductPRODUCT
Featured products
Contact Us
- Ingersoll Rand
- 47588446001 93481331
- Shaft Sleeve
- USA
- 120 × 50 × 95 mm
- 0.35 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 8
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Ingersoll Rand 47588446001 93481331 Shaft Sleeve is a mechanical component used in compatible Ingersoll Rand air compressor drive assemblies. Listed as a shaft sleeve for the motor assembly, it forms part of the rotating mechanical arrangement and works with associated shaft, sealing, and retaining components.
In a compressor drive assembly, the shaft and its associated components must maintain the intended alignment and mechanical interface while transmitting rotation. A shaft sleeve provides a defined surface around the shaft in the assembly, helping establish the required fit with neighboring components. Its condition matters wherever the sleeve interfaces with seals or other closely fitted parts.
The 93481331 part number appears in Ingersoll Rand parts listings as a shaft sleeve associated with motor and gear assemblies. It is therefore important to distinguish this component from a standalone shaft, bearing, or shaft seal housing. Those parts have different mechanical functions, even when they are installed close together.
During an overhaul, a technician may inspect the shaft sleeve when investigating oil leakage near a shaft, wear around a rotating interface, or damage discovered during motor or gear assembly maintenance. The sleeve should be evaluated together with the shaft, seals, retaining components, and mating surfaces. Replacing the sleeve alone will not correct misalignment or damage elsewhere in the assembly.
Before ordering a replacement, confirm that the 93481331 reference matches the installed compressor drive configuration. The complete parts arrangement and equipment identification are more dependable than visual similarity alone.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Ingersoll Rand |
| Part Number | 47588446001 / 93481331 |
| Product Type | Shaft Sleeve |
| Component Classification | Motor Shaft Sleeve |
| Application | Compatible Ingersoll Rand compressor drive assemblies |
| Primary Function | Provides a fitted mechanical surface within the shaft assembly |
| Associated Components | Shaft, seals, retaining ring, and drive assembly components |
| Dimensions | 120 × 50 × 95 mm |
| Weight | 0.35 kg |
Product Features
- Shaft interface component: Forms part of the mechanical arrangement around the drive shaft.
- Motor assembly application: Identified as a shaft sleeve for compatible Ingersoll Rand motor assemblies.
- Mechanical fit: Works with the associated shaft and mating components to maintain the intended assembly relationship.
- Serviceable replacement part: Can be inspected during drive assembly overhaul or mechanical maintenance.
- Seal-interface relevance: Sleeve condition may affect sealing performance where the design uses the sleeve as a sealing surface.
- Distinct part identification: The 93481331 number helps separate the sleeve from nearby shaft, seal, and retaining components.
Working Principle
The 93481331 shaft sleeve operates as a fitted mechanical component within the compressor’s drive assembly. Its role is determined by the shaft arrangement and the neighboring parts with which it interfaces. Where the design uses the sleeve as a running or sealing surface, its finish, fit, and condition influence the performance of that interface.
A simplified mechanical arrangement is:
Drive Motor → Shaft Assembly → Shaft Sleeve and Associated Sealing Components → Gear or Driven Assembly
The exact layout depends on the compressor model and drive design. The sleeve is not an independent power-transmission device; it works as part of the assembled shaft system.
For example, during a compressor overhaul, an engineer may find wear marks or oil residue near the motor-side shaft interface. The inspection should establish whether the sleeve is worn, whether the seal has deteriorated, and whether the shaft or housing shows damage. If the underlying cause is shaft runout, incorrect assembly, or bearing wear, fitting a new sleeve alone may not resolve the problem.
During installation, the sleeve must be fitted according to the relevant assembly procedure. Incorrect positioning, damage to the sleeve surface, or contamination at the mating interface can affect the final assembly. The surrounding seals and retaining hardware should also be checked before the drive is returned to operation.
Role in the Compressor Drive Assembly
The shaft sleeve is a mechanical interface component within the motor and gear assembly. Its function depends on the specific arrangement of the rotating shaft, seals, and retaining hardware.
| System Element | Function |
|---|---|
| Drive Motor | Supplies rotational power to the compressor drive assembly |
| Drive Shaft | Transmits rotation to the connected mechanical assembly |
| 93481331 Shaft Sleeve | Provides the specified sleeve interface around the shaft |
| Shaft Seal | Limits leakage at the relevant shaft opening |
| Seal Housing | Supports the shaft seal within the assembly |
| Retaining Ring | Secures compatible components in their intended positions |
| Drive Key | Transfers torque between compatible keyed components |
| Gear Assembly | Transfers or adapts rotational motion according to the drive arrangement |
| Motor Support | Supports the motor and helps maintain the intended mounting relationship |
Industrial Applications
| Application | Practical Use |
|---|---|
| Rotary Screw Compressor Overhauls | Inspecting shaft-interface components during drive assembly servicing |
| Motor and Gear Assemblies | Maintaining the mechanical arrangement around the motor shaft |
| Compressor Rebuild Workshops | Replacing worn sleeves when the shaft and mating components remain serviceable |
| Industrial Compressed-Air Systems | Supporting mechanical maintenance of compatible compressor drives |
| Preventive Maintenance | Inspecting sleeve and sealing interfaces during planned equipment overhauls |
| Oil Leakage Investigation | Checking the sleeve, seal, and shaft surfaces around a suspected leakage point |
| Drive Assembly Repair | Restoring the specified mechanical fit when a sleeve is damaged or worn |
| Spare Parts Management | Identifying the correct shaft sleeve by its component number |
| Equipment Refurbishment | Assessing shaft-interface wear before reassembling the motor and gear components |
Installation and Maintenance
- Verify the part reference: Confirm 47588446001 and 93481331 against the compressor’s parts documentation and existing component identification.
- Identify the drive assembly: Check the compressor model and installed motor or gear configuration before dismantling the equipment.
- Isolate the machine: Follow the approved shutdown and lockout procedure before accessing the drive assembly.
- Document the original arrangement: Record the positions and orientation of the sleeve, shaft seal, retaining ring, and related components.
- Inspect the shaft sleeve: Check for scoring, wear marks, corrosion, deformation, or damage to the mating surface.
- Examine the shaft: Check for wear, runout, surface damage, and other conditions that could affect the sleeve’s fit.
- Inspect associated seals: Check the relevant shaft seal and housing for deterioration, leakage evidence, or damage.
- Clean the mating surfaces: Remove contamination using an appropriate method that will not damage the sleeve, shaft, or housing.
- Fit the replacement sleeve: Follow the equipment-specific assembly procedure and avoid damaging the sleeve during installation.
- Check component positioning: Confirm that the sleeve, seals, retaining hardware, and other mating parts are correctly seated.
- Verify the completed assembly: Check the mechanical arrangement and follow the specified inspection procedure before returning the compressor to service.
- Record the maintenance work: Document the part number, equipment identification, observed wear, replaced components, and final inspection results.
Compatible System Components
| Component | Function |
|---|---|
| Ingersoll Rand 93481331 Shaft Sleeve | Provides the specified mechanical interface within the shaft assembly |
| Ingersoll Rand 93481349 Drive Key | Transfers torque between compatible keyed components |
| Ingersoll Rand 93481356 Retaining Ring | Retains associated components in the specified assembly |
| Ingersoll Rand 93481364 Gasket | Provides sealing at the designated mating interface |
| Ingersoll Rand 88142427 Seal Housing | Supports the seal in the applicable assembly |
| Ingersoll Rand 88142450 Seal Housing | Forms part of the associated shaft-sealing arrangement |
| Ingersoll Rand 95023107 O-Ring | Provides sealing at the specified joint |
| Ingersoll Rand 95070272 O-Ring | Provides sealing at the designated interface |
| Ingersoll Rand 95720272 O-Ring | Provides sealing at the applicable assembly joint |
| Drive Shaft | Provides the rotating interface for the sleeve |
| Shaft Seal | Limits leakage around the relevant shaft opening |
| Motor Support | Supports the motor within the drive assembly |
Recommended Related Models
| Model / Part Number | Product Type | Typical Application |
|---|---|---|
| Ingersoll Rand 93481331 | Shaft Sleeve | Reference component for compatible motor shaft assemblies |
| Ingersoll Rand 93481349 | Drive Key | Associated torque-transfer component |
| Ingersoll Rand 93481356 | Retaining Ring | Retention of components within the related assembly |
| Ingersoll Rand 93481364 | Gasket | Sealing at the specified mating interface |
| Ingersoll Rand 88142427 | Seal Housing | Shaft-seal support in compatible assemblies |
| Ingersoll Rand 88142450 | Seal Housing | Related seal-housing component |
| Ingersoll Rand 95023107 | O-Ring | Sealing component for the applicable assembly |
| Ingersoll Rand 95070272 | O-Ring | Sealing component for the designated interface |
| Ingersoll Rand 95720272 | O-Ring | O-ring used at the specified joint |
| Ingersoll Rand 93481307 | Mount | Related motor or drive assembly component |
| Ingersoll Rand 93472215 | Adapter Plate | Associated mechanical mounting component |
| Ingersoll Rand 54415245 | Motor Support | Supports the motor in the relevant assembly |
| Ingersoll Rand 88115977 | Dowel Pin | Locates compatible assembly components |
| Ingersoll Rand 96739743 | Parallel Dowel Pin | Provides locating and alignment functions |
| Ingersoll Rand 95934154 | Hex-Head Cap Screw | Fastening component in the associated assembly |
Key Advantages
- Provides the specified shaft interface in compatible compressor drive assemblies.
- Supports mechanical maintenance of motor and gear components.
- Allows replacement of a damaged sleeve without automatically replacing the complete drive assembly.
- Helps maintain the intended fit between the sleeve and its mating components.
- Provides a distinct part number for maintenance identification.
Technical FAQs
What does the 93481331 shaft sleeve do in the compressor drive assembly?
It serves as a fitted mechanical component around the shaft. Its exact role depends on the assembly design, including whether it provides a sealing surface or another specified shaft interface.
Which components should be inspected when replacing the shaft sleeve?
Inspect the shaft, shaft seal, seal housing, retaining ring, and associated drive components. Wear or damage in these parts may affect the new sleeve’s fit and the performance of the completed assembly.
Can the 93481331 be used as a replacement for any Ingersoll Rand shaft sleeve?
No. Shaft sleeves are specific to their mechanical interfaces and assembly configurations. Confirm the part number and equipment identification before selecting a replacement.
What could cause a new shaft sleeve to show premature wear?
Possible causes include shaft misalignment, excessive runout, incorrect fitting, contamination, or damage to the mating components. The sleeve and surrounding assembly should be inspected together to identify the underlying cause.