ProductPRODUCT
Featured products
Contact Us
- Schneider
- BMXXBC050K
- Backplane Extension Cable
- France
- 5 meters
- 3 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 2
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Schneider BMXXBC050K Backplane Extension Cable is an industrial automation interconnection cable designed for compatible Schneider Electric Modicon modular control systems. It provides an extended connection between compatible backplane assemblies, allowing PLC hardware to be positioned with greater physical separation while maintaining the required system interconnection.
In modular automation systems, PLC processors, power supplies, I/O modules, communication modules, and other components are commonly organized around a backplane architecture. However, machine dimensions, cabinet construction, equipment accessibility, thermal requirements, and physical installation constraints can make it impractical to place all compatible assemblies directly beside one another.
A dedicated backplane extension cable provides a practical way to accommodate these requirements. The BMXXBC050K has a specified cable length of 5 meters, providing a substantially longer connection path for installations where compatible automation assemblies need to be positioned farther apart.
The supplied shipping weight is 3 kg. This is a logistics-related specification and should not be interpreted as the actual net weight of the cable.
The precise electrical characteristics, connector arrangement, supported backplane architecture, and compatible Schneider Electric equipment should be verified against the target automation system before installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Schneider Electric |
| Model | BMXXBC050K |
| Product Type | Backplane Extension Cable |
| Product Family | Modicon Industrial Automation |
| Primary Function | Backplane extension and system interconnection |
| Cable Length | 5 meters |
| Shipping Weight | 3 kg |
| Installation | Compatible Schneider Electric automation equipment |
| Application | Modular PLC and industrial control systems |
| Connection Function | Backplane/rack extension |
| Typical Use | Extended PLC system interconnection |
Note: The specified 3 kg shipping weight is a logistics value and should not be interpreted as the cable’s actual net weight.
What Is the Schneider BMXXBC050K?
The Schneider BMXXBC050K is a dedicated Backplane Extension Cable designed for use within compatible Schneider Electric Modicon automation architectures.
A modular PLC system may contain a CPU, power supply, I/O modules, communication modules, and other specialized components. These modules depend on the system’s backplane and associated interconnection architecture for proper operation.
When compatible system assemblies need to be positioned farther apart, a backplane extension cable can provide the necessary connection.
The basic architecture can be represented as:
Main Backplane → BMXXBC050K → Extended Backplane / Compatible Assembly
The exact arrangement depends on the Schneider Electric controller platform and the equipment connected to the extension.
The BMXXBC050K is a passive infrastructure component. It does not independently execute PLC application logic, process analog measurements, or control field devices.
Function of the BMXXBC050K
The primary function of the BMXXBC050K is to extend the connection between compatible backplane assemblies.
The 5-meter cable length provides greater physical layout flexibility than shorter extension cables. This can be useful when automation equipment must be separated because of:
- Cabinet dimensions
- Machine structure
- Equipment location
- Maintenance accessibility
- Thermal management
- Mechanical clearance
- Distributed control requirements
- Separate control sections
The cable should only be used in the system architecture for which it is specified and supported.
BMXXBC050K in a Modular PLC Architecture
A conventional modular PLC system can be represented as:
Power Supply → PLC CPU → Backplane → I/O Modules → Field Devices
An extended arrangement may instead use:
Main Backplane → BMXXBC050K → Extended Backplane → Additional Modules
This type of architecture can help accommodate larger control installations where compatible modules cannot conveniently be installed in one physical location.
For example, a large machine may contain multiple control sections, or a control cabinet may have separate equipment compartments. The longer BMXXBC050K connection can provide additional flexibility for system layout while maintaining the required connection between compatible assemblies.
Industrial Applications
The Schneider BMXXBC050K can be applied to compatible Modicon automation systems used in various industrial environments.
Manufacturing Automation
Large production lines can contain multiple control assemblies distributed around machinery. A longer backplane extension can help accommodate these physical arrangements.
Machine Control
Large industrial machines often require automation equipment to be positioned around mechanical structures. The 5-meter BMXXBC050K can provide greater flexibility where a longer interconnection path is required.
Material Handling
Conveyor, sorting, packaging, and warehouse systems may use distributed control equipment. An extended backplane architecture can help organize PLC hardware around the physical machine.
Process Automation
Process-control systems can require control assemblies to be positioned according to equipment zones, cabinet structures, or plant layouts.
Water and Utility Systems
Pump stations, water-treatment equipment, and infrastructure systems may use modular PLC hardware arranged across larger control installations.
Large Industrial Control Cabinets
The 5-meter length can be useful when compatible automation assemblies must be positioned in different sections of a larger control cabinet or associated equipment area.
Cable Length and Layout Planning
The specified cable length of the BMXXBC050K is 5 meters.
This longer cable length provides significant flexibility, but it also requires careful routing during system design.
Engineers should consider:
- Actual connection-point distance
- Cable routing path
- Bend requirements
- Connector accessibility
- Cable support
- Mechanical movement
- Cabinet doors and access panels
- Nearby power equipment
- Electrical interference
- Maintenance requirements
The full 5-meter length should not be installed under continuous tension.
Where excess length exists, it should be routed and secured in a controlled manner without creating sharp bends, tight loops, or unnecessary mechanical stress.
Installation Guidelines
Correct installation is essential for maintaining reliable operation.
Verify the Part Number
Before installation, confirm the complete model number:
Schneider BMXXBC050K
The cable should be matched to the intended Schneider Electric control platform and compatible backplane assemblies.
Inspect the Cable
Before installation, inspect the cable for:
- Damaged insulation
- Cuts or abrasion
- Crushed sections
- Damaged connectors
- Contamination
- Excessive bending
- Transportation damage
Verify the Interfaces
Both ends of the BMXXBC050K should be connected to compatible interfaces.
Connectors should be inserted carefully and should never be forced into an incompatible connection.
Route the Cable Correctly
Because the cable is 5 meters long, routing should be planned carefully to prevent:
- Sharp bends
- Excessive tension
- Connector loading
- Abrasion
- Mechanical interference
- Uncontrolled cable loops
Where applicable, the cable should be routed appropriately away from high-power conductors and sources of electrical interference.
Secure the Cable
Suitable cable-management methods should be used to prevent excessive movement or vibration.
Commissioning Procedure
After installation, the complete extended PLC system should be checked before returning it to normal operation.
A general commissioning sequence includes:
- Verify the BMXXBC050K model number.
- Confirm the compatibility of the connected backplane assemblies.
- Inspect the cable and connectors.
- Confirm correct connector seating.
- Check the 5-meter cable routing.
- Verify that the cable is free from excessive mechanical stress.
- Energize the system according to the approved procedure.
- Check PLC and module status indicators.
- Verify that connected modules are recognized.
- Review controller diagnostics.
- Perform a functional test of the complete automation system.
If a problem occurs, investigate the entire PLC architecture rather than assuming that the cable is the source of the fault.
Troubleshooting the BMXXBC050K
Problems associated with an extended backplane connection can appear as module-recognition faults, communication errors, or unexpected controller diagnostics.
Extended Modules Are Not Recognized
If modules connected through the extended backplane are not detected, check:
- BMXXBC050K model
- Connector seating
- Backplane compatibility
- Cable condition
- PLC power
- Controller status
- Hardware configuration
- Diagnostic information
The problem may originate from another component in the system.
Intermittent Operation
Intermittent behavior can be associated with:
- Loose connectors
- Mechanical vibration
- Cable movement
- Cable damage
- Electrical interference
- Backplane problems
- System configuration issues
Because the cable is 5 meters long, particular attention should be paid to cable routing and mechanical support.
Faults After Installation
If the system develops an error immediately after installing the cable, verify:
- Correct cable model.
- Correct connector orientation.
- Secure connector seating.
- Compatible backplane assemblies.
- System power.
- Cable routing.
- Controller configuration.
- Diagnostic messages.
Physical Cable Damage
If the cable has damaged insulation, exposed conductors, crushed sections, or damaged connectors, it should be removed from service and replaced according to the applicable maintenance procedure.
Maintenance Recommendations
The BMXXBC050K generally requires limited routine maintenance, but longer cable installations benefit from regular inspection.
Inspect the Entire Cable Route
Check for abrasion, crushing, excessive bending, contact with sharp edges, or other mechanical damage.
Check Connector Condition
Verify that both connectors remain properly seated and free from contamination.
Inspect Cable Supports
Cable-management devices should remain secure and should not create excessive pressure on the cable.
Monitor System Diagnostics
Repeated module-recognition or communication faults should be investigated promptly.
Protect Against Mechanical Movement
The 5-meter cable should not be allowed to move excessively because uncontrolled movement can place additional stress on connectors and cable insulation.
Replacement Considerations
When replacing the Schneider BMXXBC050K, verify the complete model number and system compatibility.
Important identification information includes:
- Manufacturer
- Full model number
- Cable type
- Cable length
- Connector configuration
- PLC platform
- Backplane type
- Existing system architecture
- Cable routing requirements
The 5-meter cable length is particularly important. A shorter replacement may not reach the required connection points, while an unsuitable cable with similar physical characteristics may not provide the required system compatibility.
Physical appearance alone should never be used to determine whether an industrial automation cable is interchangeable.
System Integration
The BMXXBC050K can form part of a larger Schneider Electric modular automation system.
| System Component | Typical Function |
|---|---|
| PLC CPU | Executes application logic |
| Power Supply | Provides system power |
| Main Backplane | Provides module interconnection |
| Extended Backplane | Supports additional compatible modules |
| Digital I/O Modules | Interface with discrete field devices |
| Analog I/O Modules | Interface with analog process signals |
| Communication Modules | Provide industrial network connectivity |
| BMXXBC050K | Extends the compatible backplane connection |
| HMI | Provides operator visualization |
| Engineering Software | Supports programming and configuration |
The exact equipment combination depends on the specific Schneider Electric automation platform.
Engineering Best Practices
Plan the 5-Meter Cable Route
The full cable length should be considered during the initial machine and cabinet design.
Provide Mechanical Support
A long cable should be routed and supported appropriately to prevent its own movement from placing excessive stress on connectors.
Avoid Sharp Bends
The cable should be routed with appropriate bends rather than being folded sharply to fit inside a cabinet.
Maintain Electrical Separation
Where required by the system design, route the cable appropriately in relation to high-power conductors and switching equipment.
Protect Against Environmental Exposure
The cable should be protected from excessive heat, moisture, abrasion, and mechanical impact according to the requirements of the installation.
Document the Cable Path
The BMXXBC050K model number and connection points should be recorded in system drawings and maintenance documentation.
Physical and Shipping Information
The Schneider BMXXBC050K has a specified cable length of:
5 meters
The supplied shipping specification is:
Shipping Weight: 3 kg
The 3 kg figure should be treated as the shipping or logistics weight. It should not be interpreted as the net weight of the cable itself.
This distinction is useful when calculating transportation, warehouse handling, packaging, and spare-parts logistics.
Key Advantages
5-Meter Extension Length
The BMXXBC050K provides 5 meters of cable length for compatible backplane extension applications.
Greater Installation Flexibility
The extended length can help position compatible PLC assemblies farther apart when required by the machine or cabinet layout.
Support for Modular PLC Architecture
The cable can form part of a compatible Schneider Electric modular control-system architecture.
Suitable for Larger Installations
A 5-meter connection can be useful in larger control cabinets, machinery, and distributed automation arrangements.
Improved Layout Options
The longer cable can give system designers additional flexibility when planning the physical arrangement of control equipment.
Technical FAQs
What is the Schneider BMXXBC050K?
The Schneider BMXXBC050K is a Backplane Extension Cable designed for compatible Schneider Electric Modicon industrial automation systems.
What is the cable length of the BMXXBC050K?
The specified cable length is 5 meters.
What is the shipping weight?
The supplied shipping weight is 3 kg. This is a logistics value and should not be confused with the cable’s actual net weight.
What is the purpose of a backplane extension cable?
It provides an interconnection between compatible backplane assemblies when PLC hardware needs to be positioned farther apart within an extended modular system.
Is the BMXXBC050K a PLC module?
No. It is a passive cable assembly, not a PLC CPU, I/O module, or standalone communication module.
Can another 5-meter Schneider cable replace the BMXXBC050K?
Not automatically. The connector configuration, electrical characteristics, PLC platform, backplane architecture, and system compatibility must be verified before substitution.
What should be checked if extended modules are not detected?
Check the BMXXBC050K model, connector seating, cable condition, backplane compatibility, PLC power, controller diagnostics, and hardware configuration.
How should a 5-meter backplane extension cable be maintained?
Maintenance should include inspection of the complete cable route, connectors, mechanical supports, insulation, and system diagnostics.
Conclusion
The Schneider BMXXBC050K Backplane Extension Cable is an industrial automation interconnection component designed to support compatible Modicon modular PLC architectures. With a specified 5-meter cable length, it provides extended physical connection capability for applications where compatible backplane assemblies need to be positioned farther apart.
The longer cable length can provide greater flexibility for large control cabinets, industrial machinery, distributed equipment arrangements, and other automation installations. Because the cable is an infrastructure component rather than an active PLC device, its reliable operation depends on correct system compatibility, connector installation, cable routing, mechanical protection, and proper commissioning.
For procurement and replacement, the complete BMXXBC050K model should be verified against the intended Schneider Electric automation system and connected backplane equipment. The supplied 3 kg shipping weight should be regarded as a logistics specification and not as the actual net weight of the cable.