ProductPRODUCT
Featured products
Contact Us
- Ingersoll Rand
- 47639429001 24900458
- Oil Filter
- USA
- 118 × 118 × 364 mm
- 2.54 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 5
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Ingersoll Rand 47639429001 24900458 Oil Filter is a replacement filtration component used in Ingersoll Rand compressor systems. It is installed in the compressor lubrication circuit to remove solid contaminants from circulating oil before the oil continues through the system.
During compressor operation, lubricating oil carries heat and can also collect wear particles, dirt, and other contaminants. The oil filter helps capture these particles before they circulate to components that depend on clean oil for lubrication and cooling.
This type of filter is commonly handled as a scheduled maintenance item. When replacing it, maintenance personnel should verify the part-number identification, filter mounting arrangement, sealing condition, and compatibility with the specific compressor configuration.
Technical Specifications
| ParameterSpecification | Value |
|---|---|
| Manufacturer | Ingersoll Rand |
| Part Number | 47639429001 |
| Alternate Part Number | 24900458 |
| Product Type | Oil Filter |
| Application | Compressor lubrication system |
| Primary Function | Lubricating oil filtration |
| Dimensions | 118 × 118 × 364 mm |
| Weight | 2.54 kg |
Product Features
- Intended for oil filtration in Ingersoll Rand compressor systems.
- Removes particulate contamination from the circulating lubrication oil.
- Supports cleaner oil circulation through the compressor lubrication circuit.
- Helps limit contamination reaching lubrication-dependent components.
- Suitable for planned compressor maintenance and filter replacement.
- Uses identified Ingersoll Rand part numbers for spare-parts matching.
- Supports routine servicing of compressor lubrication systems.
Working Principle
The 24900458 oil filter operates within the compressor’s oil circulation path. Lubricating oil enters the filter housing and passes through the filtration media, where suspended particles and other solid contaminants are retained.
Filtered oil then continues through the lubrication circuit toward the components requiring lubrication and cooling. As contamination accumulates in the filter media, pressure resistance can increase, making filter condition an important part of compressor maintenance.
The filter itself is a passive mechanical component. Its effectiveness depends on correct installation, proper sealing, suitable oil circulation, and replacement at the interval specified for the applicable compressor and operating conditions.
Role in a Compressor Lubrication System
| System ElementFunction | |
|---|---|
| Oil Reservoir / Sump | Stores and collects circulating compressor oil |
| Oil Pump | Moves lubricating oil through the compressor oil circuit |
| Oil Filter | Removes particulate contamination from circulating oil |
| Oil Cooler | Controls oil temperature where provided by the compressor design |
| Compressor Airend | Receives lubricating and cooling oil during operation |
| Control System | Monitors compressor operating conditions and maintenance-related parameters |
Industrial Applications
| ApplicationTypical Use | |
|---|---|
| Industrial Air Compressors | Filtration of circulating compressor lubrication oil |
| Manufacturing Plants | Routine oil-filter replacement during compressor service |
| Process Industries | Maintaining clean lubrication oil in continuous-duty compressor systems |
| Oil and Gas Facilities | Supporting compressor lubrication-system maintenance |
| Industrial Utilities | Scheduled filtration maintenance for plant compressed-air equipment |
| Compressor Overhaul | Replacement of filtration components during planned equipment servicing |
Installation and Maintenance
- Verify the Part Number — Confirm that 47639429001 and 24900458 match the required compressor configuration before installation.
- Shut Down the Compressor — Stop the compressor and follow the applicable isolation and lockout procedure before servicing the lubrication circuit.
- Allow the System to Stabilize — Follow the compressor service procedure for oil temperature, pressure release, and safe access before removing the existing filter.
- Inspect the Existing Filter — Check the removed filter and surrounding area for abnormal contamination, metal particles, oil leakage, or other indications of equipment condition.
- Clean the Mounting Area — Remove dirt and residual oil from the filter mounting surface before installing the replacement.
- Inspect the Seal — Check the replacement filter sealing area and make sure the mating surface is clean and undamaged.
- Install the Filter Correctly — Fit the replacement filter according to the compressor manufacturer’s specified installation procedure and tightening requirements.
- Avoid Cross-Threading — Start the filter carefully by hand where applicable and ensure the mounting interface is correctly engaged before final tightening.
- Check Oil Level — Verify the compressor lubrication oil level after filter replacement and adjust it according to the applicable service procedure.
- Inspect for Leakage — After restarting the compressor, inspect the filter connection and surrounding lubrication circuit for oil leakage.
- Monitor Operating Conditions — Observe oil pressure, temperature, and other available compressor indications after maintenance.
- Record the Service — Document the filter part number, replacement date, operating hours, and relevant maintenance observations for future service planning.
Related Components
| ComponentFunction | |
|---|---|
| Compressor Oil Pump | Circulates lubrication oil through the compressor system |
| Oil Cooler | Removes heat from circulating compressor oil |
| Oil Separator System | Supports separation of oil from compressed air in applicable compressor designs |
| Compressor Airend | Uses circulating oil for lubrication and cooling where applicable |
| Oil Reservoir / Sump | Collects and stores circulating compressor oil |
| Compressor Control System | Monitors operating parameters associated with compressor operation |
Recommended Related Models
| Model / Product FamilyProduct Type | Typical Application |
|---|---|
| Ingersoll Rand 47639429001 | Oil Filter replacement |
| Ingersoll Rand 24900458 | Oil Filter replacement / spare-part identification |
| Ingersoll Rand Compressor Oil Filters | Lubrication-system filtration |
| Ingersoll Rand Compressor Lubrication Components | Compressor oil circulation and filtration |
| Ingersoll Rand Compressor Maintenance Parts | Scheduled compressor service |
Key Advantages
- Supports clean oil circulation within the compressor lubrication system.
- Helps reduce particulate contamination in circulating compressor oil.
- Supports lubrication and cooling functions for applicable compressor components.
- Suitable for scheduled maintenance and filter replacement.
- Provides clear part-number references for maintenance and spare-parts identification.
Technical FAQs
What is the primary function of the Ingersoll Rand 24900458 Oil Filter?
The 24900458 oil filter removes particulate contamination from circulating compressor oil before the oil continues through the lubrication circuit.
What is the relationship between 47639429001 and 24900458?
47639429001 is the identified Ingersoll Rand part number, while 24900458 is an associated part-number reference for the oil filter. Both identifiers should be checked against the compressor’s parts documentation before ordering or replacement.
What should be inspected when replacing the oil filter?
Maintenance personnel should inspect the filter mounting surface, sealing area, existing oil condition, and surrounding connections. Unusual metal particles or excessive contamination in the removed filter can also provide useful information about compressor condition.
Can an oil filter replacement affect compressor operation?
A correctly installed replacement filter should restore the intended filtration function. After replacement, the compressor should be checked for oil leakage and monitored for normal oil pressure, temperature, and other applicable operating indications.