ProductPRODUCT
Featured products
Contact Us
- GE
- IS215UCVFH2A
- Dual-Slot Controller Board
- USA
- 266.7 x 196.85 x 88.9 mm
- 1.2 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 6
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The GE IS215UCVFH2A Dual-Slot Controller Board is a specialized controller assembly designed for use in compatible GE industrial automation and control-system architectures. As part of the GE IS215 family, the IS215UCVFH2A is intended to provide controller-level processing and coordination functions within systems where multiple hardware modules must operate together as an integrated control platform.
Industrial control systems commonly distribute processing, I/O, communication, and interface functions across several hardware assemblies. A controller board provides the processing layer that coordinates information between these different system components. The dual-slot configuration of the IS215UCVFH2A allows the board to occupy the corresponding controller position within compatible equipment while supporting the system architecture for which it was designed.
The GE IS215UCVFH2A has listed dimensions of 266.7 × 196.85 × 88.9 mm and a weight of approximately 1.2 kg. Its larger physical format distinguishes it from narrower GE controller boards and makes accurate cabinet and chassis planning important during installation or replacement.
The module should be installed only in a compatible GE control-system configuration. Exact processor specifications, memory, communication interfaces, firmware requirements, and electrical characteristics depend on the applicable hardware revision and host system and should be confirmed before commissioning.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Model | IS215UCVFH2A |
| Product Type | Dual-Slot Controller Board |
| Product Family | GE IS215 Series |
| Controller Configuration | Dual-Slot |
| Primary Function | Industrial control and processing |
| Application | Industrial Automation and Control |
| Dimensions | 266.7 × 196.85 × 88.9 mm |
| Weight | 1.2 kg |
| Installation | Compatible GE control-system equipment |
| System Role | Controller / Processing Assembly |
| Typical Use | Industrial Control, Automation, Monitoring and System Coordination |
What Is the GE IS215UCVFH2A?
The GE IS215UCVFH2A is a Dual-Slot Controller Board designed to operate as part of a compatible GE industrial control architecture.
Unlike a conventional standalone controller that contains all required control functions in one independent unit, an industrial controller board typically works together with I/O modules, interface boards, communication hardware, terminal assemblies, power supplies, and supervisory equipment.
The IS215UCVFH2A can therefore be viewed as one layer within a larger automation system:
Field Equipment → I/O and Interface Hardware → Controller → Control Outputs → Process Equipment
The controller receives information from the surrounding system, processes the information according to the configured control application, and coordinates appropriate control actions.
The exact function of the board depends on the GE control platform in which it is installed.
Understanding the Dual-Slot Configuration
The dual-slot designation is an important physical and architectural characteristic of the IS215UCVFH2A.
A dual-slot controller assembly requires appropriate space within the associated chassis or control-system enclosure. When replacing the board, technicians should confirm that the replacement occupies the same mechanical position and that adjacent system hardware is compatible with the installation arrangement.
The dual-slot configuration can also affect:
- Chassis positioning
- Adjacent module clearance
- Connector alignment
- Cooling and airflow
- Cable routing
- Module replacement procedures
- System maintenance access
For this reason, the physical dimensions of 266.7 × 196.85 × 88.9 mm should be considered during cabinet planning and replacement work.
Function and Working Principle
Controller Processing
The primary purpose of a controller board is to provide the processing layer required by the industrial control application.
The controller receives system information, evaluates configured control functions, and coordinates responses with other system components.
Depending on the host application, the processing system may handle:
- Process measurements
- Equipment status
- Control commands
- Sequencing information
- Alarm conditions
- Interlocks
- Diagnostic information
- Communication data
The precise processing capabilities should be confirmed from the applicable GE system documentation.
System Coordination
Industrial automation systems contain multiple hardware modules that must operate together.
The IS215UCVFH2A can serve as the coordination point between these hardware layers, allowing information to move between field-level devices, I/O assemblies, control logic, and supervisory systems.
Control Logic
The controller executes the control functions configured for the associated system.
Depending on the application, control logic may be responsible for:
- Equipment sequencing
- Start/stop control
- Process regulation
- Interlocking
- Status monitoring
- Alarm handling
- Equipment coordination
- Automated operating sequences
The exact functions are determined by the system configuration rather than by the physical board alone.
Role in Industrial Control Systems
The GE IS215UCVFH2A Dual-Slot Controller Board can serve as a central processing component within a distributed industrial control architecture.
A typical system can be represented as:
Sensors and Field Devices
↓
I/O Modules and Interface Boards
↓
GE Controller Hardware
↓
Control Logic and System Coordination
↓
Output Modules and Actuators
↓
Industrial Process
This arrangement allows the controller to combine information from different parts of the system and coordinate automated responses.
The controller may also exchange information with operator interfaces and supervisory systems, allowing operators and maintenance personnel to monitor equipment status and investigate system conditions.
Industrial Applications
Power Generation
Industrial power-generation systems require coordinated control of generators, turbines, auxiliary equipment, and associated process systems.
Controller hardware can form part of the processing architecture used to monitor equipment and coordinate operating sequences.
Turbine Control
GE control equipment is widely associated with turbine and generator applications. Controller-level hardware may operate alongside I/O, feedback, protection, and interface assemblies.
The exact application depends on the host control platform and installed configuration.
Industrial Process Control
Continuous-process industries rely on controllers to process measurements and coordinate valves, pumps, motors, and other equipment.
The IS215UCVFH2A can form part of a compatible control architecture supporting these functions.
Manufacturing Automation
Industrial production lines require synchronized control of multiple machines and process stages. Controller assemblies provide the processing layer necessary for coordinating equipment and responding to production conditions.
Utility Systems
Water, wastewater, compressed-air, pumping, and other utility systems can use industrial controller architectures to coordinate equipment and monitor process conditions.
Distributed Automation
The board can be incorporated into larger systems in which control responsibilities are distributed across multiple modules and processing assemblies.
System Architecture and Integration
Successful integration of the IS215UCVFH2A requires consideration of the complete control system rather than the controller board alone.
I/O Hardware
Input modules provide process and equipment information to the control system, while output modules transmit commands to field devices.
Interface Boards
Interface boards provide electrical or logical connections between different sections of the control architecture.
Communication Hardware
Communication components allow information to move between controllers, I/O systems, supervisory systems, and other industrial equipment.
Power Supply System
The controller requires the appropriate system power arrangement provided by its host equipment.
Operator Interface
HMI or supervisory systems may display controller status, alarms, process information, and equipment conditions.
Engineering Environment
The controller configuration depends on the specific GE control platform, software environment, firmware, and application configuration.
Installation Guidelines
Installation should be performed by qualified personnel following the maintenance procedures applicable to the host GE control system.
Verify the Part Number
Before replacement, confirm:
- Complete model number
- IS215UCVFH2A identification
- Revision information
- Board markings
- Host-system compatibility
- Installation position
- Connector arrangement
A visually similar GE board should not automatically be considered interchangeable.
Check the Mechanical Installation
Because the IS215UCVFH2A is a dual-slot assembly, verify that the available chassis or enclosure position can accommodate the board.
The listed dimensions are:
266.7 × 196.85 × 88.9 mm
Adequate space should also be maintained for connectors, cables, ventilation, and service access.
Inspect the Board
Before installation, inspect the board for:
- Physical damage
- Connector damage
- Contamination
- Corrosion
- Signs of overheating
- Loose components
- Mechanical deformation
Any abnormal condition should be investigated before energizing the system.
Follow ESD Procedures
Controller boards contain sensitive electronic components. Appropriate electrostatic-discharge precautions should be used when handling the board.
Commissioning Procedure
After installation, the controller should be commissioned systematically.
1. Mechanical Verification
Confirm that the board is correctly seated and secured.
2. Connection Inspection
Verify that all applicable connectors and interface connections are properly installed.
3. Power Verification
Confirm that the host control system provides the required operating power.
4. Controller Recognition
Check whether the system recognizes the installed controller correctly.
5. Communication Verification
Verify communication between the controller and associated I/O, interface, and supervisory components.
6. Configuration Check
Confirm that the controller configuration corresponds to the intended application.
7. Diagnostic Review
Review system diagnostics and controller status for active faults or warnings.
8. Functional Testing
Perform controlled functional tests before returning the equipment to normal operation.
Troubleshooting the GE IS215UCVFH2A
Controller-related faults should be approached systematically because symptoms can originate from associated equipment rather than the controller itself.
Controller Fails to Operate
Potential causes include:
- Incorrect installation
- Power problems
- Connector issues
- Host-system faults
- Configuration errors
- Hardware failure
Start by checking power, connections, and system diagnostics.
Communication Problems
If the controller cannot communicate with other system components, inspect:
- Interface connections
- Backplane or chassis connections
- Communication hardware
- Configuration
- Controller status
- Associated I/O modules
A communication failure does not automatically mean that the controller board has failed.
Unexpected Controller Fault
Unexpected diagnostic conditions may be caused by:
- Configuration mismatch
- Power instability
- Communication faults
- Associated module failures
- Environmental conditions
- Hardware problems
Review the system diagnostics before replacing the controller.
Intermittent Operation
Intermittent behavior may be associated with:
- Loose connectors
- Vibration
- Thermal conditions
- Power fluctuations
- Communication interruptions
- Aging electronic components
Observing the controller and surrounding system during operation can help isolate the problem.
Preventive Maintenance
Proper maintenance can reduce unexpected downtime and extend the useful service life of industrial controller hardware.
Inspect Connectors
Check connectors periodically for looseness, contamination, oxidation, or mechanical damage.
Maintain Cabinet Cleanliness
Excessive dust and contamination can interfere with cooling and electronic reliability.
Check Ventilation
Ensure that airflow paths around the controller and associated equipment remain unobstructed.
Monitor System Diagnostics
Regular review of system diagnostics can help identify developing communication, configuration, or hardware problems.
Inspect Adjacent Hardware
Because the IS215UCVFH2A operates as part of a larger system, maintenance should include nearby I/O, interface, communication, and power components.
Replacement and Spare-Part Management
The correct identification of the GE IS215UCVFH2A is essential when purchasing or stocking replacement hardware.
Before ordering a replacement, compare:
- Full model number
- Board revision
- Product type
- Slot configuration
- Connector arrangement
- Host-system model
- Existing installation location
- System configuration
The listed physical characteristics are:
Dimensions: 266.7 × 196.85 × 88.9 mm
Weight: 1.2 kg
These specifications can assist with warehouse planning, transportation, packaging, and cabinet-layout preparation.
However, physical dimensions alone should never be used as proof of electrical or functional compatibility.
Physical Handling and Storage
The IS215UCVFH2A has a listed weight of 1.2 kg, so appropriate care should be taken during removal, installation, and transportation.
The board should be handled using suitable ESD protection and should not be lifted or carried by delicate connectors or exposed components.
When stored as a spare, the module should be protected from:
- Electrostatic discharge
- Excessive humidity
- Dust
- Contamination
- Mechanical impact
- Extreme environmental conditions
Proper storage helps reduce the risk of damage before the module is installed.
Compatible System Components
The IS215UCVFH2A may operate as part of a larger GE industrial control system containing several functional components.
| Component | Typical Function |
|---|---|
| IS215UCVFH2A | Dual-slot controller and processing |
| GE I/O Modules | Process signal acquisition and output control |
| Interface Boards | Signal and system interfacing |
| Communication Hardware | Data exchange between system components |
| Terminal Boards | Field wiring and signal termination |
| Power Supply Hardware | System power distribution |
| HMI | Operator monitoring and control |
| Engineering Workstation | System configuration and maintenance |
| Industrial Network | Controller and system communication |
Exact compatibility depends on the host GE control architecture.
Engineering Best Practices
Confirm the Complete Part Number
GE IS-series hardware may contain assemblies with similar appearances but different functions. Always confirm the complete identification.
Document the Existing Installation
Before removing the original controller, document its location, connections, associated hardware, and configuration.
Investigate System-Level Causes
A controller fault indication can originate from power supplies, communication networks, I/O hardware, or configuration problems. Diagnose the complete system before replacing the board.
Follow ESD Procedures
Use appropriate anti-static protection during handling and replacement.
Verify the Replacement Before Installation
Confirm both mechanical and functional compatibility before installing replacement hardware.
Perform Controlled Testing
After installation, test the controller under controlled operating conditions before returning the equipment to full service.
Recommended Related GE Models
| GE Model | Product Type | General Role |
|---|---|---|
| IS215UCVEM01A | UCVE Controller Module | Controller and system processing |
| IS215UCVEM10A | UCVE Controller Module | Controller and processing |
| IS215UCVEH2AF | VME Control Card | Control-system processing |
| IS215UCVDH7A | Dual-Slot Controller Board | Industrial control processing |
| IS215UCCAM03 | Compact PCI Processor Board | Controller and processing |
| IS215REBFH1B | I/O Expansion Board | I/O expansion and interfacing |
| IS215PMVPH1A | I/O Module | Industrial signal interface |
These are related GE control-system assemblies and should not be assumed to be direct substitutes for the IS215UCVFH2A without verifying the host system, revision, interfaces, configuration, and application requirements.
Key Advantages
Dual-Slot Controller Architecture
The IS215UCVFH2A is designed as a dual-slot controller assembly for compatible GE control-system installations.
System-Level Processing
The board can provide controller-level processing and coordination between multiple layers of an industrial automation architecture.
Industrial Automation Integration
It can operate alongside I/O, interface, communication, power, and supervisory hardware within a larger control system.
Compact Industrial Form Factor
Despite its dual-slot configuration, the board remains a defined and manageable physical assembly with listed dimensions of 266.7 × 196.85 × 88.9 mm.
Modular Maintenance
Its role within a modular control architecture allows maintenance personnel to isolate controller hardware from other system components during troubleshooting and replacement.
Technical FAQs
What is the GE IS215UCVFH2A?
The GE IS215UCVFH2A is a Dual-Slot Controller Board designed for use within compatible GE industrial automation and control-system architectures.
What is the main function of the IS215UCVFH2A?
Its primary role is controller-level processing and coordination between different components of the associated industrial control system.
What are the dimensions of the IS215UCVFH2A?
The listed dimensions are 266.7 × 196.85 × 88.9 mm.
How much does the IS215UCVFH2A weigh?
The listed weight is approximately 1.2 kg.
What does dual-slot mean?
Dual-slot indicates that the controller assembly is designed to occupy the corresponding two-slot position within compatible system hardware. The chassis and installation arrangement should be verified before replacement.
Is the IS215UCVFH2A a standalone PLC?
It is more accurately described as a GE Dual-Slot Controller Board designed to function as part of a compatible industrial control architecture rather than as a conventional standalone PLC.
What can cause a controller fault?
Possible causes include power problems, communication failures, configuration issues, connector problems, environmental conditions, associated hardware faults, or controller hardware failure.
Can another GE IS215 controller replace the IS215UCVFH2A?
A different IS215 controller should not be assumed to be interchangeable. The complete part number, revision, slot configuration, interfaces, firmware requirements, and host-system compatibility should be checked before replacement.
What should be checked after replacement?
Technicians should verify mechanical installation, system power, controller recognition, communication, configuration, diagnostics, and relevant application functions before returning the system to normal service.
Conclusion
The GE IS215UCVFH2A Dual-Slot Controller Board is a specialized industrial control assembly intended to provide controller-level processing and system coordination within compatible GE automation architectures. Its dual-slot design allows it to occupy the appropriate controller position within the associated control-system hardware.
With listed dimensions of 266.7 × 196.85 × 88.9 mm and a weight of 1.2 kg, the IS215UCVFH2A requires careful consideration of chassis space, connector access, cooling, and handling during installation and replacement.
Reliable operation depends on correct hardware identification, compatible system configuration, stable power, proper communication, appropriate environmental conditions, and correct commissioning. When servicing or replacing the module, technicians should verify the complete GE IS215UCVFH2A identification and host-system requirements rather than relying on physical appearance alone.
For industrial automation maintenance, spare-parts management, and control-system service work, accurate identification and systematic commissioning are essential for maintaining dependable operation of equipment incorporating the GE IS215UCVFH2A Dual-Slot Controller Board.