Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |

The Siemens 6AG1322-1HF10-2AA0 Digital Output Module is a SIPLUS S7-300 SM 322 relay output module designed for industrial automation and control applications. It provides eight digital relay outputs for switching electrical loads in PLC-controlled machines, production equipment, and process automation systems.
This module is based on the standard SIMATIC S7-300 output module 6ES7322-1HF10-0AA0. Its SIPLUS configuration includes conformal coating and an extended operating temperature range, making it suitable for installations that require additional protection under demanding environmental conditions.
The module provides eight electrically isolated relay outputs. Each output can switch compatible DC or AC loads, with a rated output current of up to 5 A. It supports 24 V DC and 230 V AC switching applications, allowing a PLC program to control devices such as contactors, solenoid valves, signal lamps, and other electrical actuators.
As part of the SIMATIC S7-300 automation platform, the 6AG1322-1HF10-2AA0 operates as an output interface between the PLC control program and connected field equipment. When the controller executes an output command, the corresponding relay changes state and switches the connected circuit.
The module uses a 40-pole front connector arrangement. Its installation and wiring must follow the applicable S7-300 system requirements, including load-current limitations, external short-circuit protection, and correct terminal assignments.
With its eight relay outputs, conformal coating, and extended temperature capability, the Siemens 6AG1322-1HF10-2AA0 is relevant to industrial control panels, machinery, and automation systems where relay-based switching is required.
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Model | 6AG1322-1HF10-2AA0 |
| Product Series | SIPLUS S7-300 |
| Module Family | SM 322 |
| Product Type | Digital Relay Output Module |
| Base Standard Model | 6ES7322-1HF10-0AA0 |
| Number of Digital Outputs | 8 |
| Output Type | Relay |
| Output Isolation | Electrically isolated relay outputs |
| Rated Output Current | 5 A per output |
| DC Switching Application | 24 V DC nominal |
| AC Switching Application | Up to 230 V AC nominal |
| Load Voltage L+ | 120 V DC rated value |
| Load Voltage L1 | 230 V AC rated value |
| Supply Voltage | 20.4–28.8 V DC |
| Backplane Bus Current | Maximum 40 mA at 5 V DC |
| Input Current from L+ | Maximum 125 mA |
| Typical Power Loss | 4.2 W |
| Conformal Coating | Included |
| Operating Temperature | -25°C to +60°C |
| Front Connector | 40-pole |
| Short-Circuit Protection | Not integrated; external protection required |
| Dimensions | 40 × 125 × 120 mm |
| Weight | 0.37 kg |
| Typical Applications | Industrial relay switching, PLC output control, machine automation |
Electrical ratings depend on load type, switching frequency, wiring, and installation conditions. Consult the module documentation when designing the output circuits.
The 6AG1322-1HF10-2AA0 converts digital commands from a SIMATIC S7-300 controller into relay switching actions. It allows the PLC to control external electrical devices through eight independent output channels.
The PLC executes its control program and determines the required state of each output channel. The output module receives the corresponding signals through the S7-300 backplane bus.
When a channel is commanded to switch, the module operates its relay contact to establish or interrupt the connected electrical circuit.
For example, a PLC may activate an output when a machine reaches a specified operating condition. The corresponding relay can then energize a contactor coil or another compatible load.
Unlike transistor output modules, which use semiconductor switching elements, this module uses mechanical relay contacts.
Relay outputs are useful when the application requires switching of compatible AC or DC loads. They can provide electrical isolation between the control electronics and the external load circuit, subject to the module’s specified isolation and wiring requirements.
The relay contacts are suitable for applications such as:
The connected load must remain within the module’s voltage, current, and switching-capacity limits.
The module provides eight digital relay outputs. Each channel can be controlled through the PLC program according to machine conditions and process logic.
This arrangement allows a single module to operate multiple field devices. For example, different outputs may control a valve, a motor contactor, an alarm lamp, and auxiliary equipment.
The PLC determines when each output changes state, while the module performs the electrical switching operation.
The module supports compatible AC and DC switching applications. Its documented configuration includes 24 V DC and 230 V AC relay output applications, with a rated current of up to 5 A.
Relay selection and load compatibility should consider the electrical characteristics of the connected device. Inductive loads, such as solenoid valves and contactor coils, can produce switching transients. Appropriate suppression components may be required to protect contacts and improve service life.
The SIPLUS version includes conformal coating on its electronic assemblies. This coating provides additional protection against certain environmental influences compared with an uncoated standard module.
Its specified operating temperature range is -25°C to +60°C. However, conformal coating does not make the module waterproof or suitable for unrestricted exposure to corrosive chemicals, condensation, or conductive contamination.
The complete installation must still provide suitable enclosure protection and environmental control.
The 6AG1322-1HF10-2AA0 serves as a digital output interface in SIMATIC S7-300 PLC systems. It allows the controller to operate external devices based on programmed logic and received process signals.
Industrial controllers often require multiple output channels to control valves, contactors, indicators, and auxiliary equipment. The SM 322 module provides eight relay outputs that can be incorporated into the S7-300 system configuration.
This allows engineers to organize machine-control functions into individual output points and coordinate multiple devices through the PLC program.
The module can switch compatible electrical actuators used in automated machinery. When a PLC output command is issued, the corresponding relay contact changes state and controls the external circuit.
Typical applications include pneumatic solenoid valves, auxiliary relays, and contactor coils.
In automated production equipment, several devices may need to operate in a defined sequence. The PLC program determines the timing and conditions for each output.
The 6AG1322-1HF10-2AA0 provides the relay switching interface required to execute these commands. It can therefore support machine sequences involving feeding, clamping, positioning, conveying, and auxiliary operations.
Relay-based output switching helps separate the PLC’s internal control electronics from external load circuits. This is useful in systems where the control logic and field devices operate at different electrical potentials.
Correct grounding, wiring, and protective-device selection remain necessary for safe operation.
The Siemens 6AG1322-1HF10-2AA0 can be used in industrial systems requiring relay-based digital output control.
Production machines use digital outputs to activate contactors, solenoid valves, warning lights, and auxiliary devices.
The eight relay channels allow the PLC to control multiple electrical functions within a machine. This is useful for equipment with sequential operating steps and several independent actuators.
Packaging systems often contain pneumatic valves, conveyor motors, sealing mechanisms, and status indicators.
The module can switch compatible relay-controlled devices according to the PLC program. It helps coordinate equipment operations during feeding, filling, sealing, labeling, and product discharge.
Industrial process systems use electrical actuators to control fluid movement, equipment states, and auxiliary operations.
The module can operate compatible solenoid valves, contactors, and alarm circuits. Its suitability depends on the electrical ratings of each connected load and the process requirements.
Control cabinets often contain PLCs, relays, contactors, power supplies, terminal blocks, and protective devices.
The 6AG1322-1HF10-2AA0 can serve as the relay output interface between the S7-300 controller and external equipment. Its 40-pole front connector arrangement supports organized field wiring.
Conveyors, transfer stations, lifting equipment, and sorting machinery use digital signals to control motors and auxiliary devices.
The module can switch compatible contactor coils, warning indicators, and other electrical loads as part of a PLC-based control sequence.
Utility installations may include ventilation equipment, pumps, auxiliary valves, and alarm systems.
The module can provide relay output commands for compatible devices, subject to the applicable current, voltage, and load-type restrictions.
Correct installation is important for reliable switching performance and long-term operation.
Before installation, confirm that the module is intended for the specific SIMATIC S7-300 rack and configuration.
Check the PLC hardware configuration, module position, front connector arrangement, and system documentation. The 6AG1322-1HF10-2AA0 is based on the standard 6ES7322-1HF10-0AA0 module, but the SIPLUS version has its own environmental specifications.
Verify the supply voltage and the electrical characteristics of every connected load.
The module supports compatible 24 V DC and 230 V AC relay switching applications. The maximum rated output current is 5 A, but the permitted current also depends on the load type, switching frequency, and total-current restrictions.
Do not assume that all eight outputs can continuously operate at their individual maximum current simultaneously. Check the manufacturer’s load and grouping specifications before designing the circuit.
The module uses a 40-pole front connector. Confirm the correct connector type and terminal arrangement before wiring.
Spring-loaded terminal connectors can be used with the appropriate Siemens connector accessories, including the specified compatible connector family.
Ensure that conductors are correctly sized, securely terminated, and clearly identified.
The module does not provide integrated short-circuit protection for its relay outputs. Appropriate external protective devices must therefore be installed in the load circuits.
Select fuses or circuit protection according to the connected equipment, conductor ratings, and applicable electrical standards.
Contactors and solenoid valves are inductive loads. Switching these devices can produce voltage transients that affect relay contacts and nearby control equipment.
Use suitable suppression components where required. The selection of suppression devices should consider the load voltage, current, switching frequency, and manufacturer’s recommendations.
After installation, configure the module in the appropriate Siemens engineering environment.
Verify the module identification, rack position, output addresses, and PLC program assignments. Ensure that each output address corresponds to the intended field device.
Before operating the complete machine, test each output channel individually.
Confirm that the relay switches the intended load, that the load responds correctly, and that no abnormal heating or unexpected switching occurs. Verify interlocks and emergency-stop arrangements separately according to the machine’s safety design.
The 6AG1322-1HF10-2AA0 is designed for integration into a SIMATIC S7-300 automation system.
| Component | Function | Integration Considerations |
|---|---|---|
| SIMATIC S7-300 CPU | Executes PLC logic and controls output commands | Verify CPU compatibility and hardware configuration |
| S7-300 mounting rail | Supports PLC modules | Confirm rack layout and installation requirements |
| 40-pole front connector | Provides field wiring connections | Use a compatible connector and correct terminal assignment |
| 24 V DC power supply | Supplies compatible control circuits | Check voltage stability and current capacity |
| Contactors | Switch motor and power circuits | Verify coil voltage and suppression requirements |
| Solenoid valves | Control pneumatic or hydraulic processes | Check coil voltage, current, and inductive-load characteristics |
| Industrial relays | Provide additional switching interfaces | Select according to load and control requirements |
| Signal lamps | Provide machine status indication | Confirm voltage and lamp-load switching capacity |
| Circuit breakers and fuses | Protect external load circuits | Select according to wiring and load ratings |
| Terminal blocks | Organize field wiring | Ensure suitable current and voltage ratings |
The components listed are examples of equipment used in a complete installation. They are not necessarily included with the digital output module.
The 6AG1322-1HF10-2AA0 is a SIPLUS version of the standard SM 322 relay output module. Replacement selection should account for its eight relay outputs, current rating, environmental characteristics, and connector arrangement.
| Model | Description | Replacement Considerations |
|---|---|---|
| 6ES7322-1HF10-0AA0 | Standard SIMATIC S7-300 SM 322 relay output module | Closely related base model, but does not automatically provide the same SIPLUS environmental protection |
| 6AG1322-1HH01-2AA0 | SIPLUS S7-300 digital relay output module | Different output configuration; verify channel count and electrical ratings |
| 6ES7322-1HH01-0AA0 | Standard S7-300 relay output module | Compare relay arrangement, output characteristics, and connector requirements |
| 6AG1322-1BH01-2AA0 | SIPLUS S7-300 transistor output module | Different output technology and electrical characteristics |
| 6ES7322-1BH01-0AA0 | Standard S7-300 transistor output module | Not a direct relay-output substitute; check load compatibility and wiring |
Before replacing the module, compare:
A transistor output module should not be treated as a direct replacement for a relay output module without reviewing the electrical circuit and control design.
The module provides eight relay outputs for controlling multiple field devices through a single S7-300 module position.
Its relay outputs support compatible AC and DC load applications, providing flexibility for industrial control circuits.
The documented output current rating is 5 A per channel, subject to load type, switching frequency, and module current limitations.
Conformal coating provides additional protection for the electronic assemblies in applications requiring extended environmental capability.
The specified operating temperature range of -25°C to +60°C supports installations with wider temperature requirements than many standard control modules.
Relay-based outputs provide isolation between the internal control circuitry and external switching circuits, subject to the module’s specified isolation design.
The module is designed for the S7-300 platform and can be incorporated into PLC systems that require relay-based output expansion.
It is a SIPLUS S7-300 SM 322 digital relay output module with eight relay output channels. It is based on the standard Siemens 6ES7322-1HF10-0AA0 module and includes conformal coating.
It provides eight digital relay outputs. Each output can be controlled independently through the PLC program.
The rated output current is 5 A per output. Actual permitted loading depends on the connected load, switching frequency, and total-current restrictions.
Yes. Its relay outputs support compatible 24 V DC and 230 V AC switching applications. Check the load-voltage specifications before connecting equipment.
The 6AG1322-1HF10-2AA0 is the SIPLUS version based on the standard 6ES7322-1HF10-0AA0. It includes conformal coating and an extended operating temperature range of -25°C to +60°C.
Yes, it can switch compatible solenoid valve circuits. The valve coil voltage and current must remain within the module’s switching specifications. Suitable suppression may be needed for inductive loads.
No. External short-circuit protection must be provided for the output load circuits.
It uses a 40-pole front connector. Confirm the connector type and wiring arrangement before installation.
The SIPLUS version includes conformal coating and has a specified operating temperature range of -25°C to +60°C. However, the complete installation must still meet the environmental and enclosure requirements of the application.
Verify the complete order number, output type, number of channels, current and voltage ratings, connector arrangement, environmental protection, and PLC hardware compatibility. Also inspect the physical condition and confirm the product’s test or warranty status.
When purchasing the Siemens 6AG1322-1HF10-2AA0, verify the complete model number and confirm that the product is the SIPLUS version rather than the standard 6ES7322-1HF10-0AA0.
Check the module’s eight relay outputs, 5 A rated output current, conformal coating, and extended temperature range. These features are important when the module is being used in an existing S7-300 installation or a replacement project.
For new, surplus, or refurbished modules, request clear photographs of the product label, front connector, housing, and terminal area. Confirm the physical condition, storage history where available, and whether functional testing has been performed.
During maintenance, inspect connector contacts, wiring, external fuses, relay operation, and signs of overheating. Verify that inductive loads have appropriate suppression and that the output circuits remain within their electrical ratings.
Keep the PLC hardware configuration and output-address documentation updated. When replacing a module, verify the PLC program assignments and test every output channel before returning the equipment to normal operation.
The Siemens 6AG1322-1HF10-2AA0 SIPLUS S7-300 SM 322 Digital Output Module provides eight relay output channels for industrial PLC applications. With a rated output current of up to 5 A per channel, support for compatible AC and DC loads, conformal coating, and an operating temperature range of -25°C to +60°C, it is designed for relay-based switching in industrial automation systems.
Its compatibility with the SIMATIC S7-300 platform makes it relevant to machine control, manufacturing equipment, process automation, and industrial electrical cabinets. Accurate model identification, correct load selection, external circuit protection, and proper commissioning are essential for reliable operation.