Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

6AG4010-6BD20-0FX5 – Industrial PC Product Description, Specifications, Applications and Related Models

1. Product Overview

The 6AG4010-6BD20-0FX5 is presented as an industrial PC order number within the SIMATIC IPC3000 SMART product range.

However, the exact combination of 6AG4010-6BD20-0FX5 cannot be established as a confirmed configuration from the documented IPC3000 SMART configuration tables.

The documented product family contains both 6AG4010-6BD20-0XX5 / 0DX5 configurations and an older 6AG4010-4AB22-0FX5 configuration. These order numbers should not be treated as interchangeable because the suffix forms part of the complete hardware configuration.

For this reason, the exact processor, memory, storage and other configuration values of 6AG4010-6BD20-0FX5 are intentionally not assigned below.

The following information describes the confirmed SIMATIC IPC3000 SMART product family and the closely related documented configurations, while avoiding the use of specifications that cannot be directly established for the requested order number.

2. Product Basic Information

Parameter	Confirmed Information
Model	6AG4010-6BD20-0FX5
Brand	Siemens
Product Family	SIMATIC
Product Series	SIMATIC IPC3000 SMART
Product Category	Industrial PC
Product Type	Industrial Rack PC
Rack Format	19-inch
Rack Height	4U
Typical Application	Industrial automation and industrial computing

The SIMATIC IPC3000 SMART family is documented as a 19-inch 4U industrial PC intended for industrial automation applications.

3. Important Order Number Identification

The complete order number is particularly important for this product family.

The documented IPC3000 SMART configuration table identifies the older flagship configuration as:

6AG4010-4AB22-0FX5

The same documentation does not establish 6AG4010-6BD20-0FX5 as an exact documented configuration.

The later IPC3000 SMART configuration group uses order numbers beginning with 6AG4010-6…., with the documented technical specifications covering that group separately.

Therefore, 6AG4010-6BD20-0FX5 should not be described as if it were the same product as 6AG4010-6BD20-0DX5 or 6AG4010-4AB22-0FX5.

This distinction is important for procurement, replacement, maintenance and cabinet planning.

4. Confirmed SIMATIC IPC3000 SMART Platform Parameters

Parameter	Specification
Product Series	SIMATIC IPC3000 SMART
Product Category	Industrial PC
Installation Format	19-inch rack
Rack Height	4U
Installation Orientation	Horizontal and vertical installation supported
Dimensions – Older Documented Configuration	481 × 177 × 509 mm
Dimensions – Later 6-Series Platform	481 × 176 × 509 mm
Weight – Older Documented Configuration	Approximately 17 kg
Weight – Later 6-Series Platform	13.3–17 kg depending on configuration
Protection Rating	IP20
Safety Class	Class I

The older IPC3000 SMART documentation specifies 481 × 177 × 509 mm and approximately 17 kg, while the later 6-series documentation specifies 481 × 176 × 509 mm and a weight range of 13.3–17 kg depending on configuration. These figures should therefore be associated with their respective documented configuration groups rather than automatically assigned to 6AG4010-6BD20-0FX5.

5. Confirmed Power-Supply Platform Specifications

Parameter	Specification
Power Supply Type	AC power supply
Input Voltage	100–240 VAC
Input Frequency	50–60 Hz
350 W Power Supply	Confirmed for the IPC3000 SMART platform
500 W Power Supply	Confirmed for the later 6-series platform
350 W Rated Output	350 W
350 W Input Current	6–3 A
500 W Input Current	8–4 A

The 2020 IPC3000 SMART documentation specifies both 350 W and 500 W power-supply configurations for the later 6-series platform.

Because the exact power-supply configuration for 6AG4010-6BD20-0FX5 is not established, no individual power-supply rating is assigned to that exact order number.

6. Confirmed Interface Configuration of the IPC3000 SMART Platform

Interface	Specification
Ethernet	2 × RJ45
Ethernet Speed	10/100/1000 Mbit/s
USB	6
Front USB	2
Rear USB	4
COM1	RS232
COM2	RS232 / RS485 / RS422
VGA	1
DVI-D	1
PS/2	2
Audio Input	1
Audio Output	1
Microphone	1

The documented IPC3000 SMART platform provides two Ethernet ports, six USB ports, two COM interfaces, VGA, DVI-D, two PS/2 interfaces and audio interfaces.

7. Communication Interfaces

The IPC3000 SMART platform provides a combination of standard computer interfaces and industrial communication interfaces.

The two Ethernet interfaces support 10/100/1000 Mbit/s communication.

The serial communication configuration includes RS232 and a configurable serial interface supporting RS232, RS485 and RS422.

This interface combination makes the platform suitable for industrial systems that need to communicate with network equipment and serial industrial devices.

8. Expansion Capability

Expansion Interface	Confirmed Specification
PCI	4 slots
PCI Express x1	1
PCI Express x8	1
PCI Express x16	1
PCI Express Generation	2.0

The documented IPC3000 SMART platform provides four PCI slots and PCI Express expansion capability.

This architecture allows compatible additional hardware to be installed when the application requires additional communication interfaces or specialized expansion functions.

9. Product Description

The SIMATIC IPC3000 SMART is a rack-mounted industrial computer designed for industrial automation and industrial computing applications.

Its 19-inch 4U mechanical design allows it to be integrated into standardized industrial cabinets and equipment racks.

The platform combines PC-based computing functions with Ethernet and serial industrial communication interfaces.

Its communication configuration includes two Ethernet ports and two serial interfaces, with the second serial interface supporting RS232, RS485 and RS422 communication.

The system also provides VGA and DVI-D display interfaces, USB interfaces, PS/2 interfaces and audio connections.

The availability of PCI and PCI Express expansion slots provides additional hardware expansion capability.

The product family therefore provides a flexible industrial computing platform rather than a simple general-purpose desktop computer.

10. Industrial Automation Applications

10.1 Production-Line Applications

The IPC3000 SMART platform can serve as a local industrial computer for production-line systems.

It can run compatible industrial software used for production monitoring, data processing, operator interaction and equipment communication.

Its rack-mounted design is particularly suitable for centralized installation inside industrial control cabinets.

10.2 Machine Monitoring

The industrial PC can be used as a computing platform for machine-monitoring systems.

Compatible monitoring software can collect information from connected equipment and display operational status and production information.

The Ethernet and serial interfaces provide multiple communication options for compatible equipment.

10.3 Industrial Data Processing

The IPC3000 SMART platform can be used for local industrial data-processing applications.

Data generated by connected equipment can be transferred through Ethernet or serial communication interfaces to compatible software.

The computer can then perform data processing, visualization and application-level functions.

10.4 Operator Station Applications

The system can be used as the computing unit of an industrial operator station.

The display interfaces can connect compatible monitors, while USB and PS/2 interfaces can be used for compatible input devices.

This configuration allows the industrial PC to provide a local interface for operators interacting with industrial software.

10.5 Industrial Communication

The combination of Ethernet, RS232, RS485 and RS422 interfaces provides flexibility for industrial communication applications.

Ethernet can be used for network-based communication, while serial interfaces can be used with compatible industrial devices.

This makes the platform suitable for systems that contain multiple types of communication equipment.

10.6 Manufacturing Information Systems

The IPC3000 SMART platform can serve as a local computing node in manufacturing information systems.

Potential functions include production information display, equipment status monitoring, industrial data collection and communication with higher-level systems.

The actual application depends on the software installed and the connected industrial equipment.

11. Product Advantages

11.1 Standardized 19-inch 4U Rack Design

The 19-inch 4U structure provides a standardized mechanical format for industrial cabinet installation.

This makes the platform suitable for equipment racks and centralized control cabinets.

11.2 Broad Communication Interface Configuration

The platform combines Ethernet communication with serial communication.

The two Ethernet ports support 10/100/1000 Mbit/s operation, while the serial configuration supports RS232, RS485 and RS422.

This combination provides flexibility when integrating different types of industrial equipment.

11.3 PCI and PCI Express Expansion

The availability of PCI and PCI Express expansion slots allows the industrial PC to be adapted to applications requiring additional hardware interfaces.

This is an important advantage for industrial systems that cannot be satisfied by standard built-in interfaces alone.

11.4 Wide-Range AC Power Supply

The documented platform supports a wide AC input range of 100–240 VAC.

This provides flexibility for industrial installations using compatible AC power systems.

11.5 Multiple Display Interfaces

The VGA and DVI-D interfaces allow compatible display equipment to be connected.

This is useful for industrial visualization, monitoring stations and operator interfaces.

11.6 Combination of Standard and Industrial Interfaces

The IPC3000 SMART platform combines conventional computer connectivity with industrial serial communication.

The result is a system that can simultaneously support monitors, keyboards, USB devices, Ethernet equipment and serial industrial devices.

12. Environmental Specifications of the Platform

Parameter	Specification
Operating Temperature	+5 to +40 °C
Operating Relative Humidity	5%–80% at 25 °C, non-condensing
Storage / Transport Temperature	−20 to +60 °C
Storage / Transport Relative Humidity	5%–95% at 25 °C, non-condensing
Protection Rating	IP20
Noise Emission	<55 dB(A)

The documented environmental specifications define an operating temperature range of +5 to +40 °C and a storage/transport temperature range of −20 to +60 °C.

The documented operating relative humidity is 5%–80% at 25 °C without condensation.

13. Vibration and Shock Capability

Parameter	Specification
Vibration Standard	IEC 60068-2-6
Vibration Frequency	10–58 Hz and 58–200 Hz
Shock Standard	IEC 60068-2-27
Shock Level	9.8 m/s²
Shock Duration	20 ms
Shock Characteristics	Approximately 1 g

The documented platform specifications include defined vibration and shock resistance according to IEC environmental test standards.

14. Brand and Product Series

Item	Information
Brand	Siemens
Product Family	SIMATIC
Product Series	SIMATIC IPC3000 SMART
Product Category	Industrial PC
Product Type	19-inch 4U Rack PC
Model Requested	6AG4010-6BD20-0FX5

The product family is documented as SIMATIC IPC3000 SMART and is described as a 19-inch 4U industrial PC intended for industrial automation applications.

15. Five Closely Related Models

The following models are documented configurations within the same IPC3000 SMART family or closely related IPC3000 SMART configurations.

Model	Processor	Memory	Storage	Dimensions	Weight (kg)
6AG4010-4AA11-0XX5	Intel Pentium G2010, 2.80 GHz, 3 MB cache	2 GB DDR3-1600	250 GB	481 × 177 × 509 mm	17
6AG4010-4AA20-0XX5	Intel Pentium G2010, 2.80 GHz, 3 MB cache	4 GB DDR3-1600	—	481 × 177 × 509 mm	17
6AG4010-4AB22-0XX5	Intel Pentium G2010, 2.80 GHz, 3 MB cache	4 GB DDR3-1600	500 GB	481 × 177 × 509 mm	17
6AG4010-4AB22-0FX5	Intel Pentium G2010, 2.80 GHz, 3 MB cache	4 GB DDR3-1600	500 GB / DVD-R/W configuration	481 × 177 × 509 mm	17
6AG4010-6BD20-0DX5	Intel Core i5-6500, 3.6 GHz, 6 MB cache	4 GB DDR4	256 GB SSD	481 × 176 × 509 mm	14.1

The first four models are directly listed in the documented older IPC3000 SMART configuration plan. The 6BD20 model belongs to the later 6-series configuration group and should not be treated as identical to the requested 0FX5 order number.

16. Model 6AG4010-4AA11-0XX5

Parameter	Specification
Model	6AG4010-4AA11-0XX5
Processor	Intel Pentium G2010
Frequency	2.80 GHz
Cache	3 MB
Memory	2 GB DDR3-1600
Storage	250 GB
Optical Drive	DVD-ROM
Installation	19-inch 4U rack
Dimensions	481 × 177 × 509 mm
Weight (kg)	17 kg

17. Model 6AG4010-4AA20-0XX5

Parameter	Specification
Model	6AG4010-4AA20-0XX5
Processor	Intel Pentium G2010
Frequency	2.80 GHz
Cache	3 MB
Memory	4 GB DDR3-1600
Optical Drive	None
Installation	19-inch 4U rack
Dimensions	481 × 177 × 509 mm
Weight (kg)	17 kg

18. Model 6AG4010-4AB22-0XX5

Parameter	Specification
Model	6AG4010-4AB22-0XX5
Processor	Intel Pentium G2010
Frequency	2.80 GHz
Cache	3 MB
Memory	4 GB DDR3-1600
Storage	500 GB
Optical Drive	DVD-R/W
Installation	19-inch 4U rack
Dimensions	481 × 177 × 509 mm
Weight (kg)	17 kg

19. Model 6AG4010-4AB22-0FX5

The 6AG4010-4AB22-0FX5 is the documented older IPC3000 SMART configuration that actually uses the 0FX5 suffix.

Parameter	Specification
Model	6AG4010-4AB22-0FX5
Processor	Intel Pentium G2010
Frequency	2.80 GHz
Cache	3 MB
Memory	4 GB DDR3-1600
Optical Drive	DVD-R/W
Operating System	Windows 7 Ultimate 64-bit SP1
Installation	19-inch 4U rack
Dimensions	481 × 177 × 509 mm
Weight (kg)	17 kg

This is the key distinction between the requested 6AG4010-6BD20-0FX5 and the documented 6AG4010-4AB22-0FX5. The latter is explicitly present in the documented IPC3000 SMART configuration table.

20. Model 6AG4010-6BD20-0DX5

The 6BD20 configuration is documented separately from the 0FX5 model above.

Parameter	Specification
Model	6AG4010-6BD20-0DX5
Product Series	SIMATIC IPC3000 SMART V3
Processor	Intel Core i5-6500
CPU Cores	4
CPU Threads	4
Frequency	3.6 GHz
Cache	6 MB
Memory	4 GB DDR4 SDRAM
Storage	256 GB SSD
Ethernet	2
Serial Interfaces	2
COM	2 × RS232/RS422/RS485
Rear USB	4
Front USB	2
VGA	1
DisplayPort	1
PS/2	2
Power Supply	350 W
Dimensions	481 × 176 × 509 mm
Weight (kg)	14.1 kg

These specifications belong to 6AG4010-6BD20-0DX5, not to the requested 0FX5 order number.

21. Five Same-Brand SIMATIC Industrial PC Models

The following are suitable same-brand comparison models. They are listed as model references rather than being described as direct replacements.

Model	Product Series	Product Category	Confirmed Main Configuration
6AG4010-4AA11-0XX5	SIMATIC IPC3000 SMART	Industrial PC	Pentium G2010, 2 GB DDR3-1600, 250 GB
6AG4010-4AA20-0XX5	SIMATIC IPC3000 SMART	Industrial PC	Pentium G2010, 4 GB DDR3-1600
6AG4010-4AB22-0XX5	SIMATIC IPC3000 SMART	Industrial PC	Pentium G2010, 4 GB DDR3-1600, 500 GB
6AG4010-4AB22-0FX5	SIMATIC IPC3000 SMART	Industrial PC	Pentium G2010, 4 GB DDR3-1600, DVD-R/W, Windows 7 Ultimate 64-bit SP1
6AG4010-6BD20-0DX5	SIMATIC IPC3000 SMART V3	Industrial PC	Core i5-6500, 4 GB DDR4, 256 GB SSD

22. Processor Comparison

Model	Processor	Frequency	Cache	Cores / Threads
6AG4010-4AA11-0XX5	Intel Pentium G2010	2.80 GHz	3 MB	—
6AG4010-4AA20-0XX5	Intel Pentium G2010	2.80 GHz	3 MB	—
6AG4010-4AB22-0XX5	Intel Pentium G2010	2.80 GHz	3 MB	—
6AG4010-4AB22-0FX5	Intel Pentium G2010	2.80 GHz	3 MB	—
6AG4010-6BD20-0DX5	Intel Core i5-6500	3.60 GHz	6 MB	4 / 4

23. Memory Comparison

Model	Memory
6AG4010-4AA11-0XX5	2 GB DDR3-1600
6AG4010-4AA20-0XX5	4 GB DDR3-1600
6AG4010-4AB22-0XX5	4 GB DDR3-1600
6AG4010-4AB22-0FX5	4 GB DDR3-1600
6AG4010-6BD20-0DX5	4 GB DDR4 SDRAM

24. Storage Comparison

Model	Storage
6AG4010-4AA11-0XX5	250 GB
6AG4010-4AA20-0XX5	—
6AG4010-4AB22-0XX5	500 GB
6AG4010-4AB22-0FX5	—
6AG4010-6BD20-0DX5	256 GB SSD

A blank field is intentionally left without a substitute value where the storage configuration is not sufficiently established.

25. Mechanical Comparison

Model	Dimensions (W × H × D)	Weight (kg)	Rack Format
6AG4010-4AA11-0XX5	481 × 177 × 509 mm	17	19-inch 4U
6AG4010-4AA20-0XX5	481 × 177 × 509 mm	17	19-inch 4U
6AG4010-4AB22-0XX5	481 × 177 × 509 mm	17	19-inch 4U
6AG4010-4AB22-0FX5	481 × 177 × 509 mm	17	19-inch 4U
6AG4010-6BD20-0DX5	481 × 176 × 509 mm	14.1	19-inch 4U

26. Practical Selection Guide

If the required application is based on an older IPC3000 SMART platform using a Pentium-class processor and DDR3 memory, the 4AA11, 4AA20, 4AB22 and 4AB22-0FX5 configurations are the closest documented family references.

If a newer 6-series configuration is required, the 6BD20-0DX5 provides a Core i5-6500 processor, DDR4 memory and SSD storage.

The two groups should not be treated as hardware-equivalent products simply because their product-series names are similar.

For replacement work, the complete order number should be checked before installation because processor generation, memory technology, storage type, interfaces, power supply and mechanical dimensions can differ between configurations.

27. Overall Product Advantages

The SIMATIC IPC3000 SMART family provides a practical combination of industrial rack installation and PC-based computing.

Its 19-inch 4U form factor makes it suitable for standardized industrial cabinets.

Its Ethernet interfaces provide high-speed network communication, while RS232, RS485 and RS422 provide serial communication options.

Its PCI and PCI Express expansion capability provides additional flexibility for specialized industrial hardware.

Its VGA and DVI-D interfaces support industrial visualization applications.

Its USB and PS/2 interfaces support conventional computer peripherals.

Its wide-range AC power supply architecture supports compatible industrial electrical installations.

Its defined operating temperature, humidity, vibration and shock specifications make the platform suitable for controlled industrial environments.

28. Final Technical Summary

Parameter	Information
Requested Model	6AG4010-6BD20-0FX5
Brand	Siemens
Product Family	SIMATIC
Product Series	SIMATIC IPC3000 SMART
Product Category	Industrial PC
Product Type	19-inch 4U Rack PC
Exact Processor for Requested Order	—
Exact Memory for Requested Order	—
Exact Storage for Requested Order	—
Confirmed Family Dimensions – Older Configuration	481 × 177 × 509 mm
Confirmed Family Weight – Older Configuration	17 kg
Confirmed Later 6-Series Dimensions	481 × 176 × 509 mm
Confirmed Later 6-Series Weight	13.3–17 kg
Ethernet	2 × RJ45
Ethernet Speed	10/100/1000 Mbit/s
USB	6
Serial	2 × COM
COM Communication	RS232 / RS485 / RS422
VGA	1
DVI-D	1
PS/2	2
PCI	4
PCIe x1	1
PCIe x8	1
PCIe x16	1
Protection Rating	IP20
Operating Temperature	+5 to +40 °C
Storage / Transport Temperature	−20 to +60 °C

29. Final Product Description

The 6AG4010-6BD20-0FX5 should be identified carefully because the exact combination of the 6BD20 prefix and 0FX5 suffix is not established in the documented IPC3000 SMART configuration tables.

The documented IPC3000 SMART family is a 19-inch 4U industrial rack PC platform designed for industrial automation and industrial computing applications.

The family provides extensive connectivity, including two Gigabit Ethernet interfaces, six USB interfaces, two COM interfaces, VGA, DVI-D, PS/2 and audio interfaces.

The serial communication capability includes RS232, RS485 and RS422, allowing the platform to communicate with compatible industrial equipment.

The platform also provides four PCI slots and multiple PCI Express slots, giving it considerable expansion flexibility for industrial applications.

The older documented IPC3000 SMART configurations use a 481 × 177 × 509 mm mechanical envelope and approximately 17 kg weight.

The later 6-series documentation specifies 481 × 176 × 509 mm and a configuration-dependent weight of 13.3–17 kg.

Because these mechanical figures belong to different documented configuration groups, they should not be presented as an exact specification for 6AG4010-6BD20-0FX5.

The most important technical distinction is that 6AG4010-4AB22-0FX5 is a documented order number, while the later 6AG4010-6BD20-0DX5 is a separate documented configuration.

Therefore, for the exact product identification requested here, the safest technical description is to retain 6AG4010-6BD20-0FX5 as the requested model while not assigning processor, memory, storage or exact mechanical values that belong to other order numbers.

This approach prevents specifications from the 6BD20-0DX5 and 4AB22-0FX5 models from being incorrectly combined into a product configuration that has not been established.