Siemens 6AG4010-6AB31-0XX5 — Product Information and Technical Specifications

1. Product Overview

The Siemens 6AG4010-6AB31-0XX5 is a SIMATIC IPC industrial computer designed for fixed industrial installations. It belongs to the SIMATIC IPC3000 SMART V3 generation and uses a 19-inch, 4U rack-PC form factor.

The complete order number is important when identifying this product because several closely related industrial PCs use the same basic 6AG4010 order-number structure. Different order numbers can represent different processor, memory, storage, power-supply and operating-system configurations.

For purchasing, maintenance and replacement work, 6AG4010-6AB31-0XX5 should therefore be used as the complete product identification rather than relying only on the SIMATIC IPC3000 SMART V3 series name.

2. Product Introduction

The 6AG4010-6AB31-0XX5 is an industrial PC configuration within the SIMATIC IPC3000 SMART V3 product family.

The product is built around a standardized 19-inch rack-mounted industrial computer design. The 4U chassis format allows the PC to be integrated into industrial equipment racks and control cabinets designed around standard 19-inch installation dimensions.

Compared with a conventional office computer, an industrial PC is intended to operate as part of an automation or industrial computing system. It can provide the computing platform required for visualization, monitoring, engineering software, data processing and communication between industrial applications and connected equipment.

The SIMATIC IPC3000 SMART V3 platform is particularly suited to installations where a conventional PC architecture is required but the computer must be incorporated into a fixed industrial environment.

The 6AG4010-6AB31-0XX5 should be treated as a specific hardware configuration rather than simply as a generic IPC3000 SMART V3 unit. When replacing the product, the complete order number should be matched to the existing system configuration.

3. Detailed Product Parameters

4. Mechanical Design

The 19-inch rack format is one of the defining characteristics of the SIMATIC IPC3000 SMART V3 platform.

A 4U industrial chassis provides a larger physical enclosure than compact embedded PCs and is intended for fixed installation in equipment racks or industrial cabinets.

The dimensions of 590 × 554 × 293 mm and the 14.1 kg weight place the product in the full-size industrial rack-PC category. These mechanical characteristics should be taken into consideration when planning cabinet space, rack support, cable routing and maintenance access.

5. Processor and Computing Configuration

The exact processor configuration for 6AG4010-6AB31-0XX5 is not retained here because a directly verified specification for this complete order number is required before assigning a processor model.

For that reason, processor specifications from closely related order numbers have deliberately not been transferred to this product.

This distinction is important for industrial procurement. A similar order number may belong to the same product series while using a different processor generation or hardware configuration.

6. Memory and Storage

The exact memory and storage configuration of 6AG4010-6AB31-0XX5 is not retained here because the corresponding values cannot be assigned to this complete order number with sufficient certainty.

No memory capacity, storage capacity or storage type from another SIMATIC IPC3000 SMART V3 configuration has been substituted.

This approach avoids a common problem in industrial equipment documentation: taking the specification of a similar model and presenting it as the specification of the target order number.

7. Communication Interfaces

The communication interface configuration gives the product a practical connection structure for industrial environments.

The two Ethernet LAN interfaces can be used for network connectivity within industrial and automation systems.

The two serial interfaces support RS232, RS422 and RS485 communication standards. These serial standards are widely used for connecting industrial equipment, instrumentation, controllers and legacy devices.

The six USB interfaces provide additional connectivity for peripherals and service equipment. Two USB interfaces are positioned at the front and four at the rear.

The VGA and DisplayPort interfaces provide display connectivity for suitable monitors and industrial visualization equipment.

8. Industrial Communication

The serial communication interfaces are particularly useful in environments where industrial devices still use serial communication.

RS232 is commonly used for point-to-point equipment connections.

RS422 is suited to differential serial communication applications where greater communication distance and noise resistance are required.

RS485 is widely used in industrial environments because it can support multi-device communication architectures when the appropriate communication protocol and network configuration are used.

The availability of these communication standards makes the IPC suitable for integration with a broad range of industrial equipment, provided that the required software protocol and electrical interface configuration are compatible.

9. Product Applications

Industrial Automation

The 6AG4010-6AB31-0XX5 can be used as an industrial computing platform within PC-based automation systems.

It can form part of an architecture that combines industrial computers with automation controllers, field equipment, communication networks and visualization software.

The computer can provide the processing environment required by industrial applications that are more software-oriented than controller-only systems.

HMI and Industrial Visualization

The industrial PC can provide the hardware platform for compatible HMI and visualization applications.

A suitable display can be connected through the available VGA or DisplayPort interface, allowing the computer to serve as an operator-facing visualization station.

Typical visualization functions can include equipment status, process information, alarms, production information and operating parameters.

Machine Monitoring

The IPC can be integrated into machine-monitoring applications where information from production equipment needs to be collected and presented to operators or maintenance personnel.

The Ethernet and serial communication interfaces allow the computer to participate in systems where different types of equipment need to exchange information.

Production Data Processing

Industrial PCs can also be used for local production-data processing.

A suitable application can collect information from connected equipment, process the information locally and provide data to operators or other systems.

The exact data-processing capability depends on the application software and the connected equipment rather than on the IPC hardware alone.

Engineering Applications

The industrial computer can provide a fixed computing platform for engineering and maintenance software.

This can be useful in control rooms, automation cabinets, engineering stations and production environments where a permanently installed computer is preferred.

Industrial Communication

The product’s Ethernet and serial communication interfaces allow it to participate in industrial communication architectures.

The Ethernet interfaces can connect the IPC to industrial networks, while the serial interfaces provide connectivity to equipment using RS232, RS422 or RS485.

Data Acquisition

The industrial PC can be used as a local computing point in data-acquisition systems.

Depending on the software configuration, information from sensors, controllers, instruments or machines can be collected and processed by the PC.

Control-Room Computing

The 19-inch rack format makes the product suitable for centralized computing installations.

It can be installed together with other rack-mounted industrial equipment in control rooms, equipment cabinets and automation infrastructure.

10. Product Advantages

Standard 19-Inch Rack Format

The standardized 19-inch rack format makes the product suitable for industrial installations based on conventional rack dimensions.

The 4U height provides a substantial chassis for fixed industrial computing applications.

This makes the unit particularly appropriate where the computer needs to be integrated into an organized rack or cabinet rather than placed as a conventional desktop PC.

Broad Communication Capability

The combination of Ethernet, serial, USB and display interfaces gives the system a flexible connection structure.

Two Ethernet interfaces provide network connectivity, while the two serial interfaces support RS232, RS422 and RS485.

This combination allows the IPC to communicate with both modern Ethernet-based equipment and equipment using traditional serial interfaces.

Flexible Display Connectivity

The availability of VGA and DisplayPort provides two display interface options.

This is useful when integrating the IPC with different generations of industrial monitors and operator displays.

Service-Friendly USB Layout

Two USB interfaces are available at the front of the computer and four are located at the rear.

The front USB interfaces are convenient for maintenance, temporary peripheral connection and service operations.

The rear USB interfaces are better suited to permanently installed peripherals.

Industrial Computer Architecture

The product is designed as a dedicated industrial PC rather than a general consumer desktop.

This makes it suitable for applications where the computer is part of a larger automation or industrial equipment installation.

Clear Product Identification

The complete 6AG4010-6AB31-0XX5 order number provides a precise reference for procurement and maintenance.

Using the complete order number helps prevent confusion with other 6AG4010 configurations.

11. Brand

The brand associated with the product is Siemens.

The product belongs to the SIMATIC IPC range and specifically to the SIMATIC IPC3000 SMART V3 family.

12. Product Series — SIMATIC IPC3000 SMART V3

The SIMATIC IPC3000 SMART V3 series is a family of rack-mounted industrial PCs.

The series is based on a 19-inch, 4U industrial PC architecture and provides a platform for PC-based automation, visualization, monitoring and industrial data-processing applications.

Different order numbers within the series can use different processor, memory, storage and power configurations.

This makes the complete order number important when selecting a replacement.

The 6AG4010 order-number family includes multiple hardware configurations. Models should therefore be compared using their complete order numbers rather than only the common series name.

13. Five Related Models

The following models are closely related to the same SIMATIC IPC3000 SMART V3 product family.

14. Related Model Comparison

The 6AG4010-6AB20-0XX5 is a lower-memory configuration using the Intel Pentium Dual Core G4400 processor, 4 GB DDR4 memory and a 1 TB HDD.

The 6AG4010-6AC30-0XX5 also uses the Pentium Dual Core G4400 processor but increases the memory configuration to 8 GB DDR4 and provides two 1 TB HDDs.

The 6AG4010-6BD31-0XX5 uses the Intel Core i5-6500 processor with 8 GB DDR4 memory and a 256 GB SSD.

The 6AG4010-6BC40-0XX5 combines the Core i5-6500 processor with 16 GB DDR4 memory and two 1 TB HDDs.

The 6AG4010-6AE41-0AX5 uses the Pentium Dual Core G4400 with 16 GB DDR4 memory and a 512 GB SSD.

These models demonstrate the range of hardware configurations available within the related SIMATIC IPC3000 SMART V3 family.

15. Five Same-Brand Models for Comparison

16. Hardware Configuration Comparison

17. Product Application Areas

The 6AG4010-6AB31-0XX5 can be positioned within industrial PC applications where a fixed rack-mounted computing platform is required.

Its 19-inch 4U mechanical format makes it appropriate for equipment-rack installations.

Its Ethernet interfaces make it suitable for industrial network environments where PC-based applications need network connectivity.

Its RS232, RS422 and RS485 serial interfaces provide connectivity options for industrial equipment using serial communication.

Its USB interfaces provide additional connectivity for service equipment and peripherals.

Its VGA and DisplayPort interfaces provide options for connecting industrial monitors and visualization displays.

Together, these characteristics make the product suitable for industrial automation computing architectures, visualization stations, machine-monitoring systems, engineering installations and industrial data-processing applications.

18. Product Advantages at a Glance

19. Installation Considerations

The 19-inch rack format should be considered when planning the installation space.

The chassis dimensions of 590 × 554 × 293 mm should be used when calculating the required cabinet or rack space.

The 14.1 kg weight should also be considered when designing rack support and installation hardware.

Adequate access should be provided for network cables, serial cables, USB devices, display cables and other connections.

Because the product provides both front and rear USB interfaces, the installation should allow sufficient access to the front panel for maintenance while keeping the rear side accessible for permanent connections.

20. Replacement and Procurement Considerations

For replacement purposes, the complete order number 6AG4010-6AB31-0XX5 should be treated as the primary identification.

A model from the same product family should not automatically be regarded as a direct replacement.

For example, the related 6AG4010-6BD31-0XX5 uses a Core i5-6500 processor, 8 GB DDR4 memory and a 256 GB SSD, while other related configurations use Pentium processors or different storage arrangements.

Therefore, when replacing an existing IPC, the complete hardware configuration should be matched rather than selecting a model only because it has the same 19-inch 4U mechanical format.

21. Product Summary

22. Final Product Description

The Siemens 6AG4010-6AB31-0XX5 is a 19-inch 4U industrial PC belonging to the SIMATIC IPC3000 SMART V3 family.

Its standardized rack-mounted design makes it suitable for fixed industrial installations where a dedicated PC platform is required.

The product provides two Ethernet LAN interfaces, two serial/COM interfaces supporting RS232, RS422 and RS485, six USB interfaces, VGA, DisplayPort, two PS/2 interfaces and audio connectivity.

Its mechanical dimensions are 590 × 554 × 293 mm, with a weight of 14.1 kg.

The product can be used as part of industrial automation computing systems, visualization installations, machine-monitoring systems, engineering stations, industrial communication systems and production-data processing applications.

Its main strengths are the standardized 19-inch 4U industrial chassis, broad communication-interface configuration, flexible display connectivity and suitability for integration into fixed industrial computing environments.

For procurement and replacement, the complete order number 6AG4010-6AB31-0XX5 should be retained because closely related SIMATIC IPC3000 SMART V3 models can have substantially different processor, memory, storage and power configurations.