ProductPRODUCT
Featured products
Contact Us
- Siemens
- 6AG2134-6GF00-4AA1
- Analog Input Module
- Germany
- 15 × 73 × 58 mm
- 0.038 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 6
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Siemens 6AG2134-6GF00-4AA1 SIPLUS ET 200SP Analog Input Module is part of the SIPLUS product range associated with the SIMATIC ET 200SP distributed I/O platform. Analog input modules allow a PLC to receive variable electrical signals from field instruments and use the resulting process values in control logic, monitoring, and equipment coordination.
In a process installation, instruments measuring pressure, temperature, flow, or level may deliver analog signals to a distributed I/O station positioned near the equipment. The input module acquires supported signals and makes the corresponding measurement data available to the controller. The PLC can then use these values to display operating conditions, generate alarms, compare measurements against setpoints, or initiate programmed responses.
The ET 200SP architecture places I/O modules within a modular station connected to the automation controller through an interface module. This arrangement helps organize field wiring and distribute signal acquisition across a machine or plant. The SIPLUS designation identifies the component within Siemens’ product range for applications with specified environmental requirements.
When selecting the 6AG2134-6GF00-4AA1 for a new installation or replacement, the exact input configuration matters. Supported signal types, channel count, measurement range, resolution, and base-unit compatibility determine whether the module can interface correctly with the connected instruments and existing controller project.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Model | 6AG2134-6GF00-4AA1 |
| Product Family | SIPLUS ET 200SP |
| Automation Platform | SIMATIC ET 200SP |
| Product Type | Analog Input Module |
| Module Function | Analog process signal acquisition |
| Signal Category | Analog input |
| System Architecture | Distributed I/O |
| Controller Integration | Through a compatible ET 200SP station interface |
| Field Device Interface | Compatible analog instruments, subject to signal specifications |
| Measurement Parameters | Depend on the supported input configuration |
| Signal Ranges | Verify against the model-specific hardware specification |
| Installation Context | Industrial automation control cabinet |
| Dimensions | 15 × 73 × 58 mm |
| Weight | 0.038 kg |
Product Features
- SIPLUS product family: Belongs to Siemens’ SIPLUS range for applications with defined environmental requirements.
- ET 200SP integration: Fits within the modular SIMATIC ET 200SP distributed I/O architecture, subject to the applicable station configuration.
- Analog signal acquisition: Supports process measurement acquisition for compatible field instruments.
- PLC data integration: Makes configured input values available to the controller for application logic and monitoring.
- Distributed installation: Supports locating signal acquisition closer to instruments and process equipment.
- Modular system expansion: Allows analog input functions to be incorporated alongside compatible digital and analog I/O modules.
- Engineering configuration: Requires the hardware configuration and input settings to match the installed module and connected signals.
- Diagnostic support: Compatible station and controller diagnostics can assist with investigating channel, wiring, or configuration problems.
Working Principle
The Siemens 6AG2134-6GF00-4AA1 operates as an analog signal acquisition component within a compatible ET 200SP station. A field instrument produces an electrical signal representing a measured process variable. The module receives the signal through its designated input interface and converts the supported input into digital measurement data for the automation system.
Field Instrument → Analog Input Channel → ET 200SP Station → Interface Module → PLC
For example, a pressure transmitter connected to a compatible input channel may provide a signal representing discharge pressure in a pumping or process system. The input module acquires the signal, and the controller interprets the resulting value according to the configured channel settings and instrument scaling. The PLC can then compare the measurement with operating limits, display the pressure, or use it in a control sequence.
The exact signal conversion method, electrical input range, channel arrangement, and resolution depend on the module’s specific hardware configuration. These characteristics must be established before selecting instruments or assigning input channels in the controller project.
Measurement accuracy also depends on correct wiring, suitable shielding and grounding practices where specified, compatible field signals, and appropriate engineering configuration. If a value appears incorrect, technicians should check the transmitter output, terminal connections, channel parameters, and controller scaling before attributing the problem to a failed module.
Role in a Distributed I/O Control Architecture
Within an ET 200SP automation system, the analog input module provides the measurement interface between field instrumentation and the PLC. The module acquires the supported signals, while the station interface transfers the resulting data to the controller for application processing.
| System Component | Function | Relationship to the Analog Input Module |
|---|---|---|
| Field Transmitter | Measures pressure, flow, level, temperature, or another process variable | Supplies an analog signal when compatible with the input channel |
| Analog Input Module | Acquires supported analog signals | Converts input signals into measurement data |
| ET 200SP Base Unit | Provides the module’s mounting and electrical connection arrangement | Supports installation and field wiring |
| ET 200SP Interface Module | Connects the distributed I/O station to the automation network | Transfers station data to and from the controller |
| SIMATIC PLC | Executes the control program | Processes acquired values and determines the required control response |
| Industrial Communication Network | Carries data between the controller and distributed station | Supports communication with the ET 200SP interface |
| Engineering Software | Configures hardware and application logic | Defines module configuration, input addressing, and signal scaling |
| HMI or Supervisory System | Displays process conditions and operating information | May present measurement values and alarms processed by the PLC |
The specific channel layout and field signal types must match the installed hardware. The controller project should reflect the actual module and its supported configuration.
Industrial Applications
| Application Area | Typical Use | Relevance of the Analog Input Module |
|---|---|---|
| Process Automation | Acquiring measurements from pressure, flow, and level transmitters | Supplies process values to PLC logic |
| Water and Wastewater Treatment | Monitoring tank levels, flow rates, and pressure | Supports measurement-based control and alarm handling |
| HVAC Systems | Acquiring compatible temperature and pressure signals | Supplies measurements for equipment regulation |
| Manufacturing Machinery | Monitoring process variables at machine stations | Extends analog measurement capability where supported |
| Pumping Systems | Monitoring suction or discharge conditions | Enables the controller to use pressure and other process measurements |
| Chemical Processing | Acquiring measurements from compatible process instruments | Supports process monitoring and operating-limit checks |
| Energy and Utility Systems | Monitoring selected operating parameters | Integrates analog measurements into distributed control |
| Packaging Equipment | Reading analog process values from compatible instruments | Supports applications requiring continuous-value feedback |
Actual suitability depends on the module’s supported input characteristics, environmental requirements, station configuration, and the electrical specifications of the connected instruments.
Installation and Maintenance
- Verify the module identification: Confirm the complete model number 6AG2134-6GF00-4AA1 against the installed hardware and project documentation.
- Confirm station compatibility: Check that the intended ET 200SP interface module, base unit, and station arrangement support the selected module.
- Review the electrical specifications: Establish the supported input types, signal ranges, terminal assignments, and wiring requirements before connecting field devices.
- Isolate the equipment: Follow the site’s electrical safety procedures and disconnect the relevant power sources before installing or removing the module.
- Inspect the mounting position: Check the mounting rail, base unit, available space, and surrounding conditions against the installation requirements.
- Install the module correctly: Fit the module into the designated position and confirm that it is seated securely in the station.
- Check field instrument compatibility: Verify that each transmitter’s output signal is supported by the intended input channel.
- Verify terminal wiring: Connect field signals according to the applicable wiring diagram, including specified shielding, grounding, and polarity requirements.
- Configure the hardware: Ensure that the controller engineering project identifies the correct module and station arrangement.
- Set input parameters: Configure the supported measurement range, channel settings, and engineering scaling required by the application.
- Perform commissioning checks: Compare the displayed or acquired input values with suitable reference measurements and investigate abnormal readings before placing the system into normal service.
- Document maintenance work: Record the module identification, channel assignments, wiring changes, configuration updates, and test results for future troubleshooting.
Compatible System Components
| Component | Function | Relationship to the Module |
|---|---|---|
| SIMATIC ET 200SP Interface Module | Connects the I/O station to the controller network | Transfers analog input data to the PLC |
| ET 200SP Base Unit | Provides mounting and electrical connections | Supports module installation and field wiring |
| ET 200SP Digital Input Module | Acquires discrete signals | Complements analog measurement with ON/OFF status inputs |
| ET 200SP Digital Output Module | Switches discrete control circuits | Supports actuator and auxiliary-device control |
| Compatible Analog Transmitters | Measure and transmit process variables | Supply supported electrical input signals |
| SIMATIC S7 Controller | Executes automation logic | Processes the acquired measurement values |
| HMI Panel | Displays operating values and alarms | Presents process information supplied by the control system |
| Engineering Software | Configures hardware and control logic | Supports channel setup, scaling, and diagnostics |
Compatibility depends on the exact module configuration, base unit, interface module, controller, and connected field instruments.
Recommended Related Models
| Product or Component Category | Product Type | Relationship |
|---|---|---|
| Siemens 6AG2134-6GF00-4AA1 | SIPLUS ET 200SP Analog Input Module | Specified module for identification and replacement |
| Siemens SIPLUS ET 200SP Analog Input Modules | Analog Input Modules | Related category for distributed process signal acquisition |
| Siemens SIPLUS ET 200SP Analog Output Modules | Analog Output Modules | Complementary category for analog command signals |
| Siemens SIPLUS ET 200SP Digital Input Modules | Digital Input Modules | Related modules for discrete sensor and switch signals |
| Siemens SIPLUS ET 200SP Digital Output Modules | Digital Output Modules | Related modules for discrete actuator and control circuits |
| Siemens SIMATIC ET 200SP Interface Modules | Distributed I/O Interface Modules | Connect compatible stations to the automation network |
| Siemens SIMATIC S7 Controllers | Programmable Logic Controllers | Process measurement data and execute control logic |
Key Advantages
- Analog measurement integration: Connects compatible process instruments to a distributed automation system.
- ET 200SP architecture: Supports modular organization of field signal acquisition.
- PLC-based processing: Makes configured measurements available for monitoring, alarms, and control logic.
- Distributed signal acquisition: Helps organize instrumentation wiring near the equipment being monitored.
- Structured diagnostics: Supports systematic checks of field signals, channel settings, and station communication.
- SIPLUS identification: Distinguishes the module within Siemens’ product range for specified environmental applications.
Technical FAQs
What is the purpose of the Siemens 6AG2134-6GF00-4AA1 SIPLUS ET 200SP Analog Input Module?
It is identified as an analog input module for the SIPLUS ET 200SP product family. Its role is to acquire supported analog signals from field instruments and make measurement data available to a compatible automation controller.
Which field instruments can be connected to this module?
Potential applications include compatible pressure, flow, level, or temperature transmitters. The actual instruments that can be connected depend on the module’s specified signal types, electrical ranges, and channel configuration.
What should be checked if an analog input value is incorrect?
Check the transmitter output, terminal wiring, channel configuration, input range, and engineering scaling in the controller project. Also inspect diagnostic information and compare the signal with a suitable reference measurement.
Can this module replace another ET 200SP analog input module?
Not automatically. Modules in the same product family can differ in supported signal types, channel count, electrical characteristics, and environmental specifications. Verify the complete part number and station configuration before selecting a replacement.