Product Overview

The Schneider BMXXEM010 Rack Slot Protective Cover is a compact protective accessory designed for use with compatible Schneider Electric modular automation rack systems. Its primary purpose is to cover an unused rack position or exposed slot, helping protect the internal mounting and connection area from accidental contact, dust, contamination, and other environmental influences.

With specified dimensions of 100 × 30 × 26 mm and a listed weight of only 0.005 kg, the BMXXEM010 is a lightweight component that can be installed as part of a clean and organized industrial control-system assembly.

In modular PLC installations, not every available rack position is necessarily occupied by an active module. Unused positions can leave areas of the rack exposed. A protective cover provides a simple way to maintain a more complete physical enclosure while helping prevent unnecessary exposure of internal interfaces.

The BMXXEM010 should be selected according to the applicable Schneider rack and module architecture. It is a protective accessory rather than an active PLC, I/O, or communication module.

Technical Specifications

The physical specifications supplied for the BMXXEM010 are 100 × 30 × 26 mm and 0.005 kg. Exact rack compatibility, mounting details, and supported installation configurations should be verified according to the intended Schneider automation system.

What Is the Schneider BMXXEM010?

The Schneider BMXXEM010 is a Rack Slot Protective Cover intended to protect an unused or exposed position within a compatible modular automation rack.

A modular PLC rack normally contains several positions for installing processors, I/O modules, communication modules, or other compatible components. If one or more positions are not occupied, a protective cover can be used to maintain a more controlled physical environment around the rack.

The BMXXEM010 does not process signals or execute control logic. Instead, it performs a mechanical protection function.

Its role can be summarized as:

Unused Rack Position → BMXXEM010 Protective Cover → Physical Protection

This simple function can be important for maintaining the condition and organization of an industrial automation assembly.

Function of a Rack Slot Protective Cover

An unused rack position can expose areas of the system that would normally be protected by an installed module.

The BMXXEM010 provides a physical covering for the applicable rack position.

Its general purposes may include:

• Covering unused rack positions
• Reducing exposure to dust
• Helping prevent accidental contact
• Improving cabinet organization
• Maintaining a finished rack configuration
• Supporting equipment protection
• Simplifying maintenance identification

The cover does not replace an active module. Its purpose is protection and physical organization.

Role in Modular PLC Systems

Modular PLC systems are designed to accommodate different combinations of control and I/O hardware.

A typical rack may contain:

• Processor modules
• Digital input modules
• Digital output modules
• Analog input modules
• Analog output modules
• Communication modules
• Interface modules
• Power-related components
• Protective accessories

Not every rack position needs to be populated in every installation.

When an available position remains unused, a rack slot protective cover can help maintain the physical integrity and organization of the system.

The BMXXEM010 therefore complements the active components of a modular automation installation.

Industrial Automation Applications

PLC Control Cabinets

The BMXXEM010 can be used in compatible PLC control cabinets where one or more rack positions are not occupied by active modules.

Machine Automation

Industrial machines may use modular control systems with unused positions reserved for future expansion. A protective cover can help protect those unused positions.

Process Automation

Process-control systems can be configured with spare rack capacity for future I/O or communication requirements.

Production Lines

Production equipment may be expanded over time. Protecting unused rack positions can help maintain a clean and organized installation before additional modules are added.

Automation System Maintenance

During maintenance, modules may be temporarily removed. A suitable protective cover can help protect an exposed position when required by the system configuration.

Physical Characteristics

Dimensions

The BMXXEM010 has specified dimensions of:

100 × 30 × 26 mm

These dimensions should be considered when planning rack installation and determining the physical arrangement of surrounding components.

The cover’s compact size allows it to occupy a defined rack position without adding unnecessary bulk to the control cabinet.

Weight

The listed weight is:

0.005 kg

This extremely low weight makes the BMXXEM010 easy to handle, install, store, and replace during maintenance activities.

Installation Guidelines

Installing a rack slot protective cover is generally straightforward, but correct positioning remains important.

1. Confirm the Rack

Verify that the rack is compatible with the BMXXEM010.

2. Identify the Unused Position

Determine which rack position requires protection.

3. Inspect the Position

Before installation, check that the position is clean and free from foreign objects or visible damage.

4. Install the Cover

Position the BMXXEM010 correctly and secure it according to the applicable rack design.

Do not apply excessive force during installation.

5. Verify the Fit

Confirm that the cover is properly seated and does not interfere with neighboring modules.

6. Inspect the Final Assembly

Check that the cover remains secure and that surrounding components are correctly positioned.

Cabinet Layout Considerations

The BMXXEM010 contributes to the physical organization of the control cabinet.

A well-organized rack installation should provide:

• Clear module identification
• Appropriate physical spacing
• Protected unused positions
• Easy maintenance access
• Organized wiring
• Adequate environmental protection

Using a suitable protective cover on an unused position can provide a more complete and orderly rack assembly.

Protection Against Environmental Contamination

Industrial control cabinets may be exposed to airborne dust, particles, oil mist, and other contaminants depending on the installation environment.

A protective cover can help reduce unnecessary exposure of an unused rack area.

However, the BMXXEM010 should not be considered a substitute for a properly rated control cabinet or environmental protection system.

Overall cabinet protection remains dependent on:

• Cabinet enclosure design
• Installation location
• Ventilation
• Filtration
• Temperature control
• Humidity management
• Maintenance practices

Maintenance Recommendations

The BMXXEM010 is a passive mechanical accessory and generally requires limited maintenance.

Nevertheless, it should be inspected during routine cabinet maintenance.

Check Physical Condition

Inspect the cover for cracks, deformation, or other damage.

Check Installation

Ensure that the cover remains correctly positioned.

Check Cleanliness

Remove accumulated dust or contamination according to the applicable cabinet maintenance procedure.

Inspect Surrounding Components

Make sure the protective cover does not interfere with neighboring modules, wiring, or cabinet components.

Troubleshooting the BMXXEM010

Because the BMXXEM010 is a passive protective component, troubleshooting is primarily mechanical.

Cover Does Not Fit Correctly

Possible causes include:

• Incorrect product selection
• Incorrect rack position
• Physical obstruction
• Damaged cover
• Damaged rack interface

Verify the product identification and rack compatibility.

Cover Becomes Loose

A loose cover may indicate:

• Incorrect installation
• Mechanical damage
• Rack interface damage
• Excessive vibration

Inspect both the cover and its mounting area.

Cover Is Damaged

If the cover is cracked, deformed, or otherwise damaged, replacement may be appropriate.

A damaged protective accessory should not be ignored simply because it does not perform an active electrical function.

Replacement Considerations

When replacing the BMXXEM010, verify the complete model number:

Schneider BMXXEM010

The supplied physical specifications are:

100 × 30 × 26 mm

and:

0.005 kg

Replacement selection should also consider:

• Rack compatibility
• Slot configuration
• Mounting arrangement
• Adjacent modules
• Physical clearance
• System expansion plans

A generic cover with similar dimensions should not automatically be considered a direct replacement.

Spare Parts and Inventory Management

Because the BMXXEM010 is small and lightweight, it can be stored efficiently as a maintenance spare.

Its listed weight of only 0.005 kg makes it convenient for:

• Maintenance inventory
• Spare-parts storage
• Field service kits
• Control cabinet maintenance
• System expansion projects

Maintaining a small number of compatible protective covers can be useful when rack configurations change or modules are temporarily removed.

Rack Expansion and Future Modules

Unused rack positions may be intentionally reserved for future system expansion.

For example, an automation system may initially install only the modules required for the first stage of a project while leaving additional positions available for future I/O or communication functions.

A protective cover can help maintain the condition of the unused position until a compatible module is eventually installed.

When expansion occurs, the cover can be removed and replaced with the appropriate active module according to the system configuration.

Key Advantages

The Schneider BMXXEM010 provides several practical benefits for compatible modular automation systems:

• Dedicated rack slot protection
• Compact 100 × 30 × 26 mm dimensions
• Extremely lightweight 0.005 kg construction
• Helps protect unused rack positions
• Supports organized cabinet design
• Useful for spare or future expansion positions
• Easy to handle and install
• Simple maintenance requirements
• Passive design with no control logic requirements

Technical FAQs

What is the Schneider BMXXEM010?

The BMXXEM010 is a Schneider Electric Rack Slot Protective Cover designed to protect a compatible unused rack position within a modular automation system.

What are the dimensions of the BMXXEM010?

The specified dimensions are 100 × 30 × 26 mm.

How much does the BMXXEM010 weigh?

The listed weight is 0.005 kg.

What is the purpose of a rack slot protective cover?

It helps cover and protect an unused rack position, reducing unnecessary exposure to dust, contamination, and accidental contact while maintaining an organized installation.

Is the BMXXEM010 an electrical module?

No. It is a passive mechanical protective accessory rather than a PLC processor, I/O module, or communication module.

Can the BMXXEM010 be used for future expansion?

Where supported by the rack architecture, a protective cover can be used on an unused position that may later receive a compatible automation module.

Does the cover provide complete environmental protection?

No. Cabinet and system-level environmental protection depends on the complete enclosure, installation conditions, ventilation, filtration, and maintenance practices.

What should be checked if the cover does not fit?

Verify the BMXXEM010 model, rack compatibility, mounting position, physical obstruction, and condition of both the cover and rack.

How should the BMXXEM010 be maintained?

Inspect it periodically for physical damage, contamination, deformation, and secure installation.

Can another cover with similar dimensions replace it?

Not automatically. The replacement should be verified for compatibility with the specific Schneider rack and mounting configuration.

Conclusion

The Schneider BMXXEM010 Rack Slot Protective Cover is a compact passive accessory designed to protect an unused position within a compatible modular industrial automation rack. With specified dimensions of 100 × 30 × 26 mm and a listed weight of only 0.005 kg, it provides a lightweight and practical solution for maintaining organized and protected rack installations.

The BMXXEM010 can be particularly useful when a modular PLC system contains spare positions reserved for future expansion or when a rack position is temporarily unoccupied during maintenance.

For installation or replacement, the complete BMXXEM010 model should be verified against the intended rack and system configuration. Correct fit, secure installation, proper cabinet conditions, and routine visual inspection help maintain the physical integrity of the overall automation system.