ProductPRODUCT
Featured products
Contact Us
- Emerson
- VE6018P3
- Ethernet Switch
- USA
- 250 x 50 x 130 mm
- 0.8 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 28
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Introduction
The Emerson VE6018P3 Ethernet Switch is an industrial networking device designed to provide Ethernet communication infrastructure for automation, process control, and industrial information systems. In a modern control environment, reliable network communication is essential for transferring information between controllers, remote I/O systems, operator interfaces, engineering workstations, supervisory systems, and other intelligent devices.
The VE6018P3 functions as part of this communication infrastructure by providing Ethernet switching between connected network devices. It is not a PLC or process controller itself; instead, it supports the communication layer that allows compatible automation equipment to exchange information.
The listed physical dimensions of the Emerson VE6018P3 are 250 × 50 × 130 mm, with a listed weight of approximately 0.8 kg. These characteristics should be considered when designing control cabinets, industrial network enclosures, equipment racks, and replacement arrangements.
Industrial Ethernet equipment must be integrated carefully because communication failures can affect monitoring, control, diagnostics, and data exchange. Proper network planning, cable installation, power verification, grounding, and commissioning are therefore important when deploying the VE6018P3.
The exact communication ports, Ethernet transmission characteristics, management functions, redundancy capabilities, power requirements, and environmental specifications should be verified against the applicable hardware documentation and installed system configuration.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Emerson |
| Model | VE6018P3 |
| Product Type | Industrial Ethernet Switch |
| Product Family | Emerson VE6000 Series |
| Main Function | Ethernet network switching |
| Communication Type | Industrial Ethernet |
| Primary Role | Network communication infrastructure |
| Application | Industrial Automation and Process Control |
| Dimensions | 250 × 50 × 130 mm |
| Weight | 0.8 kg |
| Installation | Industrial control cabinet / suitable enclosure |
| Typical Applications | DCS, PLC, SCADA, HMI and industrial Ethernet networks |
The table above intentionally limits specifications to the supplied or general product-level information. Exact port count, network speed, electrical characteristics, redundancy support, and other configuration-dependent values should be confirmed for the specific VE6018P3 installation.
What Is the Emerson VE6018P3 Ethernet Switch?
The Emerson VE6018P3 is an Ethernet switching component intended for use within industrial communication networks.
Industrial automation systems frequently contain many Ethernet-enabled devices. Instead of connecting every device directly to every other device, switches provide an organized communication structure.
A typical arrangement may look like:
PLC / DCS Controller → VE6018P3 → Remote I/O / HMI / SCADA / Engineering Equipment
The switch receives Ethernet traffic and forwards it through the appropriate network connection. This allows multiple devices to communicate through a centralized network infrastructure.
The exact role of the VE6018P3 depends on how it is incorporated into the overall Emerson automation architecture.
How Ethernet Switching Supports Automation
Ethernet switching provides the basic communication infrastructure required by many industrial control systems.
When an automation device transmits information, the Ethernet frame travels through the network to a switch. The switch evaluates the frame and forwards it toward the appropriate destination.
This process supports communication between devices such as:
- Controllers
- Remote I/O systems
- HMI stations
- SCADA computers
- Engineering workstations
- Intelligent instruments
- Network gateways
- Other Ethernet-based industrial equipment
For larger automation installations, several network switches may be combined to create multiple communication segments.
The VE6018P3 can therefore serve as one component within a larger industrial Ethernet architecture.
Role in Industrial Control Systems
Reliable communication is increasingly important in distributed automation. A controller may need to receive information from remote I/O while simultaneously exchanging process information with an HMI and supervisory system.
The Ethernet switch provides the communication path between these devices.
Controller Networking
PLCs and DCS controllers can communicate with compatible network devices through the Ethernet infrastructure.
Remote I/O
Remote I/O installations can be located near the process equipment while communicating with the central control system through the industrial network.
Operator Interfaces
HMIs depend on network communication to obtain process values, alarms, statuses, and other information from control systems.
Engineering Stations
Engineering workstations may use the network for system configuration, diagnostics, maintenance, and operational support.
Supervisory Systems
SCADA systems and other supervisory applications can exchange data with controllers through the network infrastructure.
Industrial Applications
Process Control
The VE6018P3 can be incorporated into industrial process-control networks where distributed automation devices need to communicate reliably.
Typical process industries include:
- Chemical processing
- Oil and gas
- Water treatment
- Wastewater treatment
- Power and utilities
- Pharmaceutical manufacturing
- Food and beverage processing
PLC Automation
PLC-based control systems frequently use Ethernet networks to connect controllers with remote I/O, HMI equipment, drives, intelligent instruments, and supervisory computers.
DCS Infrastructure
Distributed control systems contain multiple control and monitoring devices that depend on organized communication networks. An Ethernet switch can provide an important part of this infrastructure.
SCADA Networks
SCADA architectures require communication between field controllers and supervisory computers. Industrial Ethernet switches can provide the physical network connections needed for these systems.
Manufacturing Automation
Manufacturing equipment may use Ethernet communication for machine control, monitoring, diagnostics, production data collection, and integration with higher-level systems.
Industrial Ethernet Architecture
A properly planned automation network can be divided into several functional layers.
Field Equipment
This layer includes sensors, actuators, instruments, drives, and intelligent field devices.
Control Equipment
PLC and DCS controllers process field information and execute control strategies.
Network Infrastructure
Ethernet switches provide the physical communication paths between network-connected equipment.
Supervisory Equipment
HMIs, SCADA servers, operator stations, and engineering workstations provide monitoring, configuration, and supervisory functions.
A simplified arrangement is:
Field Devices → Remote I/O / Controllers → VE6018P3 → HMI / SCADA / Engineering Systems
The actual network topology can be different depending on system requirements, plant layout, availability requirements, and communication architecture.
Installation Guidelines
Proper installation is important for achieving stable network performance.
Confirm Product Identification
Before installation, verify the complete identification:
Emerson VE6018P3 Ethernet Switch
The model should not be selected solely based on appearance or physical dimensions.
Check the:
- Model number
- Hardware revision
- Existing network architecture
- Connection arrangement
- Power requirements
- Installation position
- Connected equipment
Consider Cabinet Space
The listed dimensions are:
250 × 50 × 130 mm
Cabinet designers should account for the equipment dimensions together with cable routing and maintenance access.
The physical installation should avoid situations where network connectors are subjected to excessive mechanical stress.
Plan Cable Routing
Ethernet cables should be routed in an organized manner and protected against mechanical damage.
Where possible, network cables should be separated from high-power electrical conductors.
Particular attention should be paid to areas containing:
- Motor cables
- Variable speed drives
- Transformers
- Contactors
- High-current switching devices
- Other sources of electrical interference
Check Grounding
The grounding and bonding arrangement should follow the requirements of the host automation system and the applicable installation practices.
Network Commissioning Procedure
After physical installation, the VE6018P3 should be commissioned together with the complete industrial network.
Step 1 — Inspect the Installation
Check that the switch is securely mounted and that the enclosure and surrounding equipment are suitable for operation.
Step 2 — Verify Network Connections
Inspect all connected Ethernet cables and connectors.
Make sure that:
- Connectors are fully inserted
- Cables are correctly routed
- Cable identification is clear
- No visible damage exists
Step 3 — Confirm Power
Verify the applicable power arrangement before energizing the unit.
Step 4 — Start Connected Equipment
Confirm that the controllers, remote I/O, HMI systems, SCADA equipment, and other connected devices are operating correctly.
Step 5 — Test Communication
Check the required communication paths between the network devices.
Depending on the application, this may include:
- PLC or DCS controller communication
- Remote I/O communication
- HMI data exchange
- SCADA communication
- Engineering workstation access
Step 6 — Monitor Network Operation
Observe the network during initial operation for communication interruptions, unexpected alarms, unstable connections, or other abnormal behavior.
Troubleshooting the Emerson VE6018P3
Network faults should be diagnosed systematically. A communication failure does not automatically mean that the VE6018P3 has failed.
Complete Network Failure
If several connected devices lose communication simultaneously, inspect the common network infrastructure.
Possible causes include:
- Loss of switch power
- Network cable problems
- Common connection failure
- Upstream network problems
- Power-distribution issues
- Electrical interference
The first diagnostic step should normally be to determine whether the problem affects one device or multiple devices.
Single Device Communication Failure
If only one device cannot communicate, inspect the communication path associated with that device.
Check:
- Device power
- Ethernet cable
- Network connector
- Device network interface
- Switch connection
- Device configuration
- Controller or application status
This helps isolate the fault without unnecessarily replacing the switch.
Intermittent Network Problems
Intermittent communication can be particularly difficult to diagnose.
Potential causes include:
- Loose connectors
- Cable damage
- Excessive cable bending
- Electromagnetic interference
- Unstable power
- Grounding problems
- Configuration issues
- Faulty connected equipment
Monitoring the fault while inspecting the physical network can help identify the source.
Slow or Unstable Communication
If network communication appears unstable rather than completely unavailable, investigate the network architecture and connected equipment.
Check for:
- Incorrect configuration
- Damaged cables
- Excessive network loading
- Network topology problems
- Device-level communication issues
- Electrical interference
The precise diagnostic procedure should follow the applicable Emerson system architecture.
Preventive Maintenance
Preventive maintenance can reduce unexpected industrial network failures.
Cable Inspection
Inspect Ethernet cables periodically for:
- Mechanical damage
- Excessive bending
- Crushing
- Loose connectors
- Improper routing
- Signs of environmental damage
Cabinet Inspection
The network equipment enclosure should be checked for excessive:
- Dust
- Moisture
- Heat
- Vibration
- Contamination
These conditions can affect electronic equipment over time.
Connector Inspection
Network connectors should remain properly seated and free from obvious contamination or mechanical damage.
Network Documentation
Maintain accurate documentation showing network connections, device locations, switch positions, and cable identification.
Communication Monitoring
Where diagnostic functions are available, repeated communication faults should be investigated rather than ignored.
A gradual increase in communication problems can sometimes indicate a developing cable, connection, power, or network infrastructure issue.
Replacement and Compatibility Considerations
When replacing a VE6018P3, technicians should verify the complete model designation and the hardware configuration of the existing installation.
Important information includes:
- Emerson model number
- Hardware revision
- Network function
- Port arrangement
- Power requirements
- Mounting arrangement
- Network topology
- Connected automation equipment
- System configuration
The listed physical characteristics are:
Dimensions: 250 × 50 × 130 mm
Weight: 0.8 kg
A different Emerson Ethernet switch may have a similar physical form but different electrical or communication characteristics. Therefore, physical dimensions alone should not be used as proof of interchangeability.
Compatible Industrial Automation Equipment
The VE6018P3 may form part of an automation network containing equipment such as:
| Equipment | Typical Role |
|---|---|
| Emerson DCS Controllers | Process control |
| PLC Controllers | Machine and logic control |
| Remote I/O | Distributed signal processing |
| HMI Systems | Operator monitoring |
| SCADA Servers | Supervisory control |
| Engineering Workstations | Configuration and diagnostics |
| Industrial Instruments | Process measurement |
| Intelligent Drives | Motor and equipment control |
| Ethernet Devices | Network communication |
Actual compatibility should be established from the complete system configuration rather than from the switch model alone.
Industrial Ethernet Engineering Practices
Use Organized Network Cabling
Clear cable routing makes commissioning and maintenance easier.
Maintain Device Identification
Network devices and cables should have clear identification so technicians can quickly trace communication paths.
Keep Network Documentation Updated
Any network modification should be reflected in the applicable drawings and maintenance documentation.
Separate Power and Communication Cables
Where appropriate, Ethernet cables should be physically separated from high-power conductors to minimize electrical interference.
Plan for Maintenance
Network equipment should be installed in locations that allow technicians to inspect connections and perform maintenance without disturbing unrelated equipment.
Consider Network Availability
Critical applications may require redundant communication paths or other availability strategies. The appropriate approach depends on the capabilities of the installed equipment and the overall automation design.
Physical Dimensions and Weight
The physical specifications supplied for the Emerson VE6018P3 Ethernet Switch are:
| Physical Parameter | Value |
|---|---|
| Length | 250 mm |
| Width | 50 mm |
| Height | 130 mm |
| Weight | 0.8 kg |
These dimensions are useful when preparing:
- Control cabinet layouts
- Network enclosure designs
- Mounting arrangements
- Replacement plans
- Equipment inventory
- Transportation and handling procedures
The 50 mm width should be considered when planning compact cabinet layouts where multiple automation and networking components must be installed in a limited space.
Key Product Characteristics
The Emerson VE6018P3 offers an industrial Ethernet switching function for suitable automation network architectures.
Important characteristics include:
- Industrial Ethernet network switching
- Integration into automation communication systems
- Suitable for distributed control architectures
- Applicable to PLC-based systems
- Applicable to DCS environments
- Suitable for SCADA network infrastructure
- Supports organized industrial network connectivity
- Compact physical form
- 250 × 50 × 130 mm listed dimensions
- 0.8 kg listed weight
Its effectiveness depends on the overall network design, including cabling, power, grounding, configuration, connected devices, and environmental conditions.
Technical FAQs
What is the Emerson VE6018P3?
The Emerson VE6018P3 is an industrial Ethernet switch intended to provide network switching and communication infrastructure within compatible industrial automation systems.
What does the VE6018P3 do?
It provides Ethernet switching functionality, allowing compatible networked devices to exchange data through the industrial communication network.
What are the dimensions of the Emerson VE6018P3?
The listed dimensions are 250 × 50 × 130 mm.
What is the weight of the VE6018P3?
The listed weight is approximately 0.8 kg.
Where can the VE6018P3 be used?
It can be integrated into suitable industrial Ethernet networks used for DCS, PLC, SCADA, HMI, remote I/O, manufacturing automation, and process control.
Is the VE6018P3 a PLC?
No. The VE6018P3 is an Ethernet switch and serves as network infrastructure rather than as a PLC processor.
Can the VE6018P3 be used with remote I/O?
An industrial Ethernet switch can provide network connectivity for remote I/O when the switch and the complete control-system architecture are compatible.
What should be checked before replacing the VE6018P3?
The complete model number, hardware revision, communication configuration, port arrangement, power requirements, network architecture, and connected equipment should be checked.
What causes intermittent Ethernet communication?
Possible causes include damaged cables, loose connectors, electromagnetic interference, unstable power, grounding problems, network configuration issues, or faults in connected devices.
Why are the physical dimensions important?
The 250 × 50 × 130 mm dimensions are important for cabinet design, mounting, cable routing, maintenance access, and replacement planning.
Conclusion
The Emerson VE6018P3 Ethernet Switch is an industrial communication component designed to provide Ethernet switching within suitable process automation and industrial control networks. By providing a centralized communication point, it can support connections between controllers, remote I/O, HMI systems, SCADA equipment, engineering workstations, and other Ethernet-enabled devices.
The VE6018P3 has listed dimensions of 250 × 50 × 130 mm and a weight of 0.8 kg, making these specifications relevant for control cabinet planning, equipment handling, installation, and replacement.
Reliable operation requires more than simply connecting Ethernet cables. The switch should be integrated into a properly planned network with appropriate power, grounding, cable routing, network configuration, and maintenance procedures.
For replacement or system expansion, the complete Emerson VE6018P3 model designation should be verified together with the applicable hardware configuration. Correct identification and systematic commissioning can help ensure stable communication and dependable operation within an industrial automation network.