Product Overview

The Ingersoll Rand 47647272001 AT020610 Air Filter Element is an industrial air filtration component designed for use in compatible Ingersoll Rand compressed-air equipment. As part of an air intake filtration system, the filter element helps remove airborne dust, dirt, and other particulate contaminants before air enters the compressor’s internal air path.

Clean intake air is important for reliable compressor operation. Airborne contamination can accumulate inside compressor components and may contribute to increased wear, reduced operating efficiency, higher maintenance requirements, and contamination of downstream equipment. A properly maintained air filter element therefore forms an important part of an overall compressor maintenance strategy.

The Ingersoll Rand 47647272001, identified as AT020610, has listed dimensions of 410 × 257 × 257 mm and a weight of 4.0 kg. Its physical size is relevant when planning replacement procedures, service inventory, storage, and installation space.

The exact filtration media, filtration rating, airflow capacity, pressure-drop characteristics, and equipment compatibility should be confirmed against the applicable compressor configuration and technical documentation before replacement.

Technical Specifications

What Is the Ingersoll Rand 47647272001 AT020610?

The 47647272001 AT020610 is an air filter element intended to protect a compatible compressor’s air intake system from particulate contamination.

Industrial compressors operate in environments where dust, dirt, fibers, and other airborne particles may be present. Without appropriate filtration, these contaminants can enter the compressor and affect internal components.

The air filter element creates a filtration barrier between the surrounding environment and the compressor’s intake air path.

A simplified airflow arrangement can be represented as:

Ambient Air → Air Filter Element → Compressor Intake → Compression System → Compressed-Air System

The exact arrangement depends on the compressor model and air-intake design.

Air Filtration Working Principle

The primary purpose of an air filter element is to separate airborne contaminants from incoming air.

When the compressor draws ambient air into the intake system, the air passes through the filter element. Particulate material is retained by the filter structure while filtered air continues toward the compressor.

Over time, captured contaminants accumulate within the filter.

This can gradually increase airflow resistance. If the filter becomes excessively loaded, the compressor may experience reduced intake airflow or increased pressure drop across the filter.

For this reason, air filter condition should be included in the compressor’s preventive maintenance program.

The exact filtration mechanism and performance characteristics depend on the filter construction and application.

Importance of Compressor Air Filtration

Air filtration has an important role in maintaining compressor reliability.

Protection Against Contamination

The filter helps prevent airborne particulate material from entering the compressor intake system.

Support for Stable Airflow

A clean filter allows the intake system to operate with appropriate airflow resistance.

Protection of Internal Components

Reducing the amount of contamination entering the compressor can help protect internal components from unnecessary particulate exposure.

Maintenance Optimization

Regular inspection and replacement of the filter element can help prevent maintenance problems associated with heavily contaminated intake filtration.

Equipment Reliability

Maintaining the air intake system is part of a broader strategy for maintaining dependable compressor operation.

Industrial Applications

The Ingersoll Rand 47647272001 AT020610 Air Filter Element can be relevant to compatible industrial compressed-air systems.

Typical application environments may include:

• Manufacturing facilities
• Industrial production lines
• Pneumatic automation systems
• Machine shops
• Packaging equipment
• Material handling systems
• Process industries
• General factory compressed-air systems
• Workshop compressor installations
• Utility air systems

The exact compressor models compatible with the filter should be verified before installation.

Installation and Replacement Guidelines

Correct installation is important for maintaining effective intake filtration.

1. Shut Down the Equipment

Before replacing the air filter element, follow the applicable compressor shutdown and isolation procedure.

The compressor should be placed in a safe maintenance condition before opening the intake filter housing.

2. Inspect the Existing Filter

Remove the existing element according to the applicable equipment procedure and inspect it for:

• Excessive dust accumulation
• Deformation
• Damage
• Moisture contamination
• Oil contamination
• Seal or mounting problems

3. Clean the Filter Housing

Before installing the replacement, inspect the filter housing and remove accumulated contamination where appropriate.

Care should be taken to prevent loose dirt from entering the compressor intake.

4. Verify the Replacement Part

Confirm the replacement identification:

47647272001 / AT020610

The physical dimensions should also be checked:

410 × 257 × 257 mm

5. Install the New Element

Install the filter element in the correct orientation and ensure that it is properly seated within the housing.

6. Inspect the Seal

Any sealing surfaces associated with the filter installation should be checked for damage or contamination.

7. Close the Housing

Secure the filter housing according to the applicable equipment maintenance procedure.

8. Check the System

After maintenance, inspect the intake assembly and verify that the compressor operates normally.

Filter Replacement Considerations

A filter should be replaced according to the compressor maintenance strategy and actual operating conditions.

Replacement requirements can be influenced by:

• Ambient dust concentration
• Operating hours
• Compressor workload
• Installation environment
• Filter loading
• Intake-system condition
• Maintenance history

A compressor operating in a dusty industrial environment may require more frequent inspection than equipment operating in a relatively clean environment.

The actual replacement interval should follow the applicable equipment maintenance requirements rather than relying only on a generic time period.

Troubleshooting Air Filter Problems

Reduced Compressor Performance

A heavily contaminated air filter may restrict intake airflow.

Possible causes should be investigated systematically, including:

• Loaded filter element
• Blocked intake path
• Damaged filter housing
• Incorrect filter installation
• Other compressor operating conditions

Increased Pressure Drop

An increase in resistance across the intake filter may indicate contamination or an airflow restriction.

The filter should be inspected when abnormal intake conditions are observed.

Excessive Dust Inside the Intake System

If contamination is found downstream of the filter, inspect:

• Filter installation
• Filter sealing
• Filter condition
• Housing condition
• Intake ducting
• Maintenance procedures

Replacing the filter alone may not resolve a sealing or housing problem.

Damaged Filter Element

A damaged filter should not normally be returned to service.

Inspect the housing and installation arrangement to determine whether the damage resulted from improper handling, installation, vibration, contamination, or another mechanical issue.

Rapid Filter Contamination

If a new filter becomes heavily contaminated unusually quickly, investigate the operating environment and intake conditions.

Possible contributors include:

• High airborne dust levels
• Construction activity
• Poor equipment placement
• Contaminated intake surroundings
• Abnormal environmental conditions

Maintenance Recommendations

Inspect the Intake System Regularly

The complete intake assembly should be inspected as part of routine compressor maintenance.

Monitor Filter Condition

Observe filter loading and general physical condition rather than relying exclusively on a fixed replacement schedule.

Maintain the Filter Housing

The housing should remain clean and properly secured.

Prevent Contamination During Service

During filter replacement, avoid allowing loose dirt or debris to enter the compressor intake.

Maintain Accurate Service Records

Record replacement dates, operating conditions, filter part numbers, and maintenance observations where appropriate.

This information can help establish a practical maintenance strategy for the specific compressor installation.

Physical Dimensions and Weight

The listed physical specifications for the Ingersoll Rand 47647272001 AT020610 Air Filter Element are:

• Dimensions: 410 × 257 × 257 mm
• Weight: 4.0 kg

These dimensions are useful when checking installation clearance, warehouse storage requirements, transport arrangements, and replacement compatibility.

The listed weight should be treated as the supplied product specification and should not be confused with packaging or shipping weight unless specifically identified otherwise.

Storage and Handling

Proper storage helps prevent damage before installation.

The filter element should be protected from:

• Excessive moisture
• Dust contamination
• Physical impact
• Crushing
• Deformation
• Contaminated storage environments

The filter should remain in suitable protective packaging until it is ready for installation whenever possible.

Avoid placing heavy equipment or components on top of the filter element.

Replacement Compatibility

When purchasing or replacing the 47647272001 AT020610, technicians should verify the complete identification before installation.

Important information includes:

• Manufacturer
• Part number
• AT020610 identification
• Filter type
• Physical dimensions
• Compressor model
• Existing filter configuration
• Housing design

The part number should be matched to the intended compressor application rather than selecting a replacement based only on physical dimensions.

A filter element with similar dimensions may have different filtration characteristics or sealing requirements.

Compatible Equipment Considerations

The 47647272001 AT020610 should be installed only in equipment for which the part is specified or confirmed as compatible.

Before ordering, maintenance personnel should compare:

Existing Filter → Part Number → Compressor Model → Filter Housing → Replacement Element

This verification process helps reduce the risk of installing an unsuitable filter element.

When the compressor model or existing filter identification is uncertain, the complete equipment configuration should be checked before procurement.

Preventive Maintenance Strategy

An effective compressor maintenance program should consider the air filter together with other service components.

A typical inspection strategy can include:

1. Inspect the intake environment.
2. Check filter condition.
3. Inspect the filter housing.
4. Check for abnormal contamination.
5. Verify proper filter seating.
6. Monitor compressor operating conditions.
7. Record filter replacement history.
8. Replace the filter when required by condition or applicable maintenance requirements.

This approach helps integrate air filtration into the overall compressor reliability program.

Engineering Best Practices

For industrial compressor installations, several practices can help maintain effective intake filtration.

Select the Correct Replacement

Always verify the complete 47647272001 / AT020610 identification before installation.

Avoid Dimension-Only Substitution

Physical dimensions alone do not guarantee equivalent filtration performance.

Protect the Intake Environment

Where practical, the compressor intake should be located away from excessive dust and contamination sources.

Inspect Sealing Surfaces

Improper sealing can allow unfiltered air to bypass the filter element.

Maintain Service Documentation

Keeping accurate maintenance records helps identify contamination trends and optimize service planning.

Key Advantages

Dedicated Air Intake Filtration

The 47647272001 AT020610 is designed as an air filter element for compatible industrial compressor applications.

Protection From Airborne Contaminants

The filter helps reduce the amount of particulate contamination entering the compressor intake system.

Suitable for Preventive Maintenance

The replaceable filter element can be incorporated into routine compressor service procedures.

Defined Physical Dimensions

With listed dimensions of 410 × 257 × 257 mm, the element can be checked against available installation and storage space.

Industrial Maintenance Application

The component is intended for use within an industrial compressed-air maintenance environment when correctly matched to the equipment.

Technical FAQs

What is the Ingersoll Rand 47647272001?

The 47647272001 is an Air Filter Element identified as AT020610 for compatible Ingersoll Rand compressed-air equipment.

What is the main function of the AT020610 filter?

Its primary function is to filter particulate contaminants from incoming air before the air enters the compatible compressor intake system.

What are the dimensions of the 47647272001?

The listed dimensions are 410 × 257 × 257 mm.

How much does the filter element weigh?

The listed weight is 4.0 kg.

Why is compressor air filtration important?

Air filtration helps reduce particulate contamination entering the compressor and supports the cleanliness and reliability of the intake system.

When should the air filter element be replaced?

Replacement depends on the equipment maintenance requirements, operating hours, environmental conditions, filter condition, and degree of contamination.

Can another filter with the same dimensions be used?

Not automatically. Physical dimensions alone do not establish filtration performance, sealing compatibility, or suitability for the compressor.

What should be checked before replacing the filter?

Verify the complete part number, AT020610 identification, compressor model, filter housing, physical dimensions, and applicable equipment requirements.

What can cause rapid filter contamination?

High dust concentration, contaminated surroundings, unusual operating conditions, or an unsuitable intake environment can contribute to rapid filter loading.

Conclusion

The Ingersoll Rand 47647272001 AT020610 Air Filter Element is an industrial compressor intake filtration component designed to help reduce airborne particulate contamination entering compatible compressed-air equipment.

With listed dimensions of 410 × 257 × 257 mm and a weight of 4.0 kg, the filter element can be incorporated into planned compressor maintenance, replacement, inventory, and service operations.

Proper filter maintenance involves more than simply replacing the element. The filter housing, sealing surfaces, intake environment, installation condition, and compressor operating conditions should also be considered. For replacement work, the complete 47647272001 / AT020610 identification should be verified against the intended compressor configuration.

Maintaining the correct air filter element and following an appropriate inspection and replacement strategy can support reliable compressor operation and help reduce problems associated with contaminated or restricted intake airflow.