ProductPRODUCT
Featured products
Contact Us
- Schneider
- BCH1302M12A1C
- Servo Motor
- France
- 147.5 mm
- 7 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 39
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Schneider Electric BCH1302M12A1C Servo Motor is an industrial servo motor designed for automated machinery requiring controlled, repeatable, and coordinated rotary motion. As part of the Schneider Electric BCH servo motor family, it can be integrated with a compatible servo drive, motion controller, feedback system, and mechanical transmission to form a complete closed-loop motion-control system.
Servo motors are widely used in industrial automation where the machine must control movement more precisely than a conventional motor-control system can provide. In a servo architecture, the controller establishes the desired motion, the servo drive regulates motor operation, and feedback information allows the system to continuously monitor actual motor behavior.
The BCH1302M12A1C has a supplied length of 147.5 mm and a weight of 7 kg. These physical parameters are important for machine layout, mounting arrangements, handling, transportation, spare-parts management, and replacement planning.
The exact electrical and performance characteristics of the BCH1302M12A1C should be confirmed using the applicable Schneider Electric documentation and motor nameplate. Parameters such as rated power, torque, rated speed, maximum speed, feedback type, brake configuration, shaft dimensions, mounting pattern, connector arrangement, and electrical ratings should not be inferred solely from the model number.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Schneider Electric |
| Model | BCH1302M12A1C |
| Product Type | Servo Motor |
| Product Family | BCH Servo Motor Series |
| Application | Industrial Motion Control |
| Control Architecture | Closed-Loop Servo System |
| Feedback | Compatible Servo Feedback System |
| Length | 147.5 mm |
| Weight | 7 kg |
| Installation | Machine-Mounted |
| Typical Applications | Industrial Automation, Positioning, Packaging, Assembly, Material Handling, Machine Tools |
Specification note: The length and weight above are the values supplied for this product. Exact electrical, mechanical, feedback, and performance specifications should be confirmed against the documentation applicable to the specific BCH1302M12A1C unit.
What Is the Schneider BCH1302M12A1C?
The Schneider BCH1302M12A1C is a servo motor intended to provide controlled rotary motion in industrial automation systems.
Unlike a basic motor that may operate primarily according to a fixed speed command, a servo motor is normally part of a feedback-controlled system. The controller sends a motion command, the servo drive manages the electrical output, and feedback information is used to determine actual motor behavior.
A simplified motion-control architecture is:
Motion Controller → Servo Drive → BCH1302M12A1C Servo Motor → Mechanical Load
The feedback path operates in the opposite direction:
Servo Motor → Feedback System → Servo Drive / Controller
The interaction between these components allows the machine to control movement according to its programmed motion profile.
Servo Motor Working Principle
The BCH1302M12A1C operates as part of a closed-loop servo system.
The motion controller establishes a target condition, which may involve position, velocity, acceleration, or coordinated machine movement. The servo drive receives the command and generates the appropriate electrical control signals for the motor.
During operation, feedback information is returned from the motor. The servo drive compares actual motor behavior with the commanded condition and continuously adjusts motor operation.
The basic control sequence is:
- The controller generates a motion command.
- The servo drive receives the command.
- Controlled electrical power is supplied to the motor.
- The motor produces mechanical rotation.
- Feedback information reports actual motor behavior.
- The servo drive compares actual and commanded conditions.
- Control output is adjusted as necessary.
- The machine follows the required motion profile.
This closed-loop process is fundamental to modern servo motion control.
Role in Industrial Automation
The BCH1302M12A1C can serve as the motor element within a larger industrial automation system.
A complete motion-control application may contain:
- PLC or motion controller
- Servo drive
- BCH1302M12A1C servo motor
- Feedback system
- Motor power cable
- Feedback cable
- Mechanical coupling
- Gearbox
- Linear transmission
- Machine mechanism
- HMI
- Safety controller
- Industrial communication network
The servo motor converts electrical energy into controlled mechanical movement, while the controller and servo drive determine how that movement is performed.
Proper integration between all system components is essential for stable machine operation.
Industrial Applications
Packaging Machinery
Servo motors are commonly used in packaging machines for indexing, feeding, cutting, sealing, and coordinated movement between machine sections.
The BCH1302M12A1C can be considered for applications where controlled motion is required and the motor must operate as part of a coordinated servo system.
Material Handling
Automated handling equipment can use servo motors for positioning conveyors, transfer mechanisms, lifting systems, and other controlled machine movements.
Assembly Machinery
Servo motors can provide repeatable positioning for automated assembly tools, fixtures, feeders, and mechanical actuators.
Machine Tools
Servo systems are widely used in machinery requiring controlled axis movement and coordinated operation.
Robotics and Automated Mechanisms
Servo motors are commonly incorporated into robotic and automated mechanical systems requiring controlled rotary movement.
Printing and Converting Equipment
Servo control can be used for synchronized rollers, material feeding, cutting, and positioning mechanisms.
Textile Machinery
Servo motors can support controlled material movement and synchronization between different machine sections.
General Factory Automation
The motor can be integrated into various automated machines where controlled rotary movement is required.
Servo Motion-Control Architecture
A typical system using the BCH1302M12A1C can include several functional layers.
| Component | Typical Function |
|---|---|
| PLC / Motion Controller | Generates motion commands |
| Servo Drive | Controls motor power and feedback loop |
| BCH1302M12A1C | Produces mechanical rotary movement |
| Feedback System | Reports actual motor movement |
| Mechanical Transmission | Transfers motor output to the machine |
| HMI | Operator control and monitoring |
| Safety System | Provides machine safety functions |
| Industrial Network | Transfers commands and status information |
The actual system configuration depends on the machine design and selected Schneider Electric automation equipment.
Installation Guidelines
Correct installation is important for achieving stable servo performance.
Before installing the BCH1302M12A1C, technicians should verify:
- Complete motor model
- Nameplate information
- Compatible servo drive
- Feedback configuration
- Motor mounting arrangement
- Shaft and coupling requirements
- Cable and connector configuration
- Mechanical load
- Environmental conditions
- Available installation clearance
The supplied motor length is 147.5 mm, and its supplied weight is 7 kg.
These values should be included in mechanical layout and equipment-handling calculations.
The overall installation envelope may be greater than the stated motor length because connectors, shaft projection, cables, mounting hardware, and service clearance may require additional space.
Mechanical Installation
The motor should be securely mounted to a suitable machine structure.
Motor Alignment
Correct alignment between the motor shaft and driven mechanism is important. Misalignment can increase mechanical stress and reduce the service life of bearings and couplings.
Coupling Installation
Where a coupling is used, it should be selected and installed according to the requirements of the actual machine.
Mechanical Load
The connected load should remain within the applicable motor and machine limits.
Vibration Control
Excessive vibration may affect the motor, feedback device, bearings, coupling, and connected machinery.
Installation Clearance
Adequate space should be provided for cable routing, inspection, maintenance, and heat dissipation.
Exact mounting-hole dimensions, shaft specifications, flange dimensions, and other mechanical details should be verified from the applicable technical documentation.
Servo Drive Integration
The BCH1302M12A1C should be paired with a compatible servo drive.
The servo drive manages the electrical power delivered to the motor and processes the associated feedback information.
Before operation, engineers should verify:
- Motor-drive compatibility
- Motor identification
- Feedback compatibility
- Power cable compatibility
- Feedback cable compatibility
- Control interface
- Communication configuration
- Motor direction
- Motion parameters
- Safety circuit status
An incorrect motor or drive configuration may produce faults, unstable operation, excessive heating, or feedback errors.
Commissioning Procedure
A controlled commissioning process can reduce startup problems.
Step 1: Confirm Motor Identification
Verify that the installed motor is the correct BCH1302M12A1C model.
Step 2: Inspect Mechanical Installation
Check mounting hardware, alignment, coupling condition, and mechanical clearance.
Step 3: Check Electrical Connections
Inspect power and feedback cables for damage, loose connections, incorrect routing, or excessive mechanical stress.
Step 4: Configure the Servo Drive
Configure the drive according to the applicable motor and feedback information.
Step 5: Verify Feedback
Confirm that valid feedback information is being received by the servo drive.
Step 6: Perform Controlled Movement
Begin testing at a low or controlled operating condition.
Step 7: Verify Rotation Direction
Confirm that actual motor rotation matches the intended machine direction.
Step 8: Test Acceleration and Deceleration
Gradually test the machine’s motion profile while observing motor and drive behavior.
Step 9: Verify Positioning
Check that the motor and machine follow the required positioning commands.
Step 10: Monitor Operating Conditions
During commissioning, monitor drive alarms, motor temperature, vibration, unusual noise, and other abnormal conditions.
Troubleshooting the BCH1302M12A1C
Servo problems should be diagnosed as system-level issues rather than immediately assuming the motor has failed.
Motor Does Not Rotate
Possible causes include:
- Servo drive not enabled
- Active safety circuit
- Incorrect motor configuration
- Missing motor power
- Feedback fault
- Damaged cable
- Loose connector
- Incorrect motion command
- Mechanical obstruction
Check the servo drive status and diagnostic information before replacing the motor.
Drive Fault During Acceleration
Potential causes include:
- Excessive acceleration demand
- Excessive mechanical load
- Incorrect motor parameters
- Feedback problems
- Cable problems
- Servo tuning issues
- Mechanical resistance
A controlled low-speed test can help separate electrical, configuration, and mechanical problems.
Positioning Error
Positioning problems can result from:
- Incorrect servo tuning
- Mechanical backlash
- Coupling problems
- Mechanical slippage
- Excessive load
- Feedback abnormalities
- Incorrect motion parameters
Both the electronic servo system and mechanical transmission should be checked.
Motor Overheating
Potential causes include:
- Excessive load
- High operating duty
- Poor heat dissipation
- Mechanical friction
- Incorrect drive configuration
- Unsuitable operating conditions
The motor should be evaluated according to the applicable operating specifications.
Excessive Noise or Vibration
Inspect:
- Motor mounting
- Shaft alignment
- Coupling
- Mechanical transmission
- Load condition
- Bearings
- Servo tuning
Mechanical problems should be eliminated before making unnecessary control adjustments.
Preventive Maintenance
Regular maintenance can help improve servo system reliability.
Inspect Motor Connections
Check power and feedback connectors for looseness, contamination, cable damage, or excessive strain.
Check Mechanical Couplings
Inspect coupling alignment and mounting condition periodically.
Monitor Temperature
An unexpected increase in operating temperature may indicate excessive load, mechanical resistance, or inadequate heat dissipation.
Monitor Vibration
Changes in vibration can indicate mechanical wear, imbalance, misalignment, or bearing-related problems.
Review Servo Diagnostics
Drive alarms and diagnostic history can provide useful information for preventive maintenance.
Maintain the Installation Environment
The motor and surrounding equipment should be protected from environmental conditions that exceed the applicable equipment requirements.
Replacement Considerations
When replacing the Schneider BCH1302M12A1C Servo Motor, the complete model designation should be verified before installation.
Important identification information includes:
- Full motor model
- Nameplate data
- Motor family
- Feedback configuration
- Brake configuration, if applicable
- Shaft configuration
- Mounting arrangement
- Connector configuration
- Compatible servo drive
- Machine load requirements
The supplied 147.5 mm length and 7 kg weight are useful for mechanical planning but are not enough to establish full compatibility.
A motor with similar physical dimensions can have different electrical, feedback, mechanical, or performance characteristics.
Physical Dimensions and Weight
The supplied physical specifications for the BCH1302M12A1C are:
Length: 147.5 mm
Weight: 7 kg
These values can be used for:
- Machine layout
- Mounting-space planning
- Equipment handling
- Transportation preparation
- Spare-parts inventory
- Replacement planning
- Mechanical design
The stated length should not be interpreted as the complete dimensional envelope. Engineers should also consider shaft projection, connectors, cables, mounting hardware, and required maintenance clearance.
Engineering Best Practices
Verify Motor and Drive Compatibility
The servo drive should be correctly matched to the exact motor model and feedback configuration.
Protect Feedback Wiring
Feedback is essential for closed-loop operation. Proper cable routing, secure connectors, and appropriate installation practices help reduce intermittent feedback faults.
Maintain Mechanical Alignment
Correct alignment helps reduce bearing loads, coupling stress, vibration, and positioning errors.
Consider the Complete Motion Profile
Servo performance depends on more than nominal motor operation. Acceleration, deceleration, load inertia, operating cycle, and machine mechanics should all be considered.
Document the Configuration
Record the motor model, drive configuration, motion parameters, commissioning results, and maintenance history.
Perform Controlled Commissioning
Initial startup should be conducted under controlled conditions before the machine is operated at full production speed or load.
Compatible Automation Components
Depending on the machine architecture, the BCH1302M12A1C may be incorporated into a Schneider Electric automation system containing:
- Compatible Schneider servo drives
- Modicon PLC systems
- Motion controllers
- Industrial HMIs
- Industrial communication systems
- Machine safety equipment
- Motor feedback interfaces
- Servo power cables
- Feedback cables
- Mechanical couplings
- Gearboxes
- Linear motion mechanisms
Exact compatibility should be confirmed for the complete motor-drive-control configuration.
Recommended Related Schneider Product Categories
| Product Category | General Function |
|---|---|
| Schneider BCH Servo Motors | Industrial servo motion |
| Schneider Servo Drives | Closed-loop motor control |
| Schneider Motion Controllers | Coordinated motion control |
| Schneider Modicon PLCs | Machine and process control |
| Schneider HMIs | Operator interface and monitoring |
| Schneider Safety Controllers | Machine safety management |
These are related product categories and should not be interpreted as direct replacement recommendations for the BCH1302M12A1C.
Key Advantages
- Designed for industrial servo motion applications
- Suitable for closed-loop motion-control systems
- Supports controlled and repeatable rotary movement
- Compatible with an appropriate Schneider servo-control architecture
- Supplied length of 147.5 mm
- Supplied weight of 7 kg
- Suitable for automated positioning applications
- Applicable to packaging, assembly, handling, and manufacturing machinery
- Supports coordinated machine movement
- Suitable for integration into industrial automation systems
Technical FAQs
What is the Schneider BCH1302M12A1C?
The Schneider BCH1302M12A1C is a Schneider Electric servo motor designed for industrial motion-control applications.
What is the length of the BCH1302M12A1C?
The supplied motor length is 147.5 mm.
How much does the BCH1302M12A1C weigh?
The supplied weight is 7 kg.
What is the BCH1302M12A1C used for?
It is intended for industrial automation systems requiring controlled rotary motion, positioning, speed regulation, and coordinated machine movement.
Does the BCH1302M12A1C require a servo drive?
A servo motor normally operates with a compatible servo drive that manages motor power and closed-loop feedback control.
What should be checked before replacing this servo motor?
The complete model number, feedback configuration, brake configuration where applicable, shaft characteristics, mounting arrangement, connectors, cables, and servo-drive compatibility should be checked.
Are the 147.5 mm length and 7 kg weight sufficient to select a replacement?
No. These physical parameters are useful for mechanical planning but do not establish electrical, feedback, or motion-control compatibility.
What can cause servo positioning errors?
Possible causes include incorrect tuning, feedback problems, mechanical backlash, coupling issues, excessive load, mechanical slippage, or incorrect motion parameters.
What can cause the motor to overheat?
Possible causes include excessive load, high duty cycle, mechanical friction, inadequate heat dissipation, incorrect configuration, or operating conditions outside the applicable specifications.
Conclusion
The Schneider Electric BCH1302M12A1C Servo Motor is an industrial motion-control component designed to operate within a compatible closed-loop servo system. When correctly integrated with a servo drive, feedback system, motion controller, and mechanical load, it can provide controlled and repeatable rotary movement for automated machinery.
The supplied physical specifications are 147.5 mm in length and 7 kg in weight. These values are useful for machine layout, mounting-space planning, handling, transportation, spare-parts management, and replacement preparation.
Reliable operation depends on the complete motion-control system. Correct motor-drive matching, proper mechanical alignment, secure feedback connections, controlled commissioning, appropriate operating conditions, and preventive maintenance all contribute to stable servo performance.
When sourcing or replacing the BCH1302M12A1C, the complete model designation should be checked carefully. Exact electrical ratings, feedback characteristics, shaft dimensions, mounting details, brake configuration, and other performance parameters should be verified against the applicable documentation for the specific motor before installation.