Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

1. Basic Product Information

Model: 20G1ANF119JN0NNNNN

Brand: Allen-Bradley

Series: PowerFlex 755

Product Type: Industrial AC Variable Frequency Drive

Rated Voltage: 690 VAC

Input: Three-phase AC

Normal-Duty Rating: 110 kW

Heavy-Duty Rating: 90 kW

Continuous Output Current: 119 A

Frame Size: Frame 6

Cooling Method: Forced Air

Enclosure: IP20/IP00, NEMA/UL Open Type

Input Configuration: AC Input with Precharge

DC Terminals: Not included

Dynamic Braking: None

Filtering: Filtered configuration, CM jumper installed

Human Interface Module: Blank configuration, no HIM included

Communication: Embedded EtherNet/IP

Typical Application: Large industrial three-phase motor control

Approximate Dimensions: 665.5 × 308 × 346.4 mm

Approximate Weight: 14.5 kg (32 lb)

The 20G1ANF119JN0NNNNN is a high-power 690 V AC drive in the PowerFlex 755 family. Its principal rating is 119 A, with a 110 kW normal-duty rating and a 90 kW heavy-duty rating.

The JN configuration is an open-type, forced-air-cooled arrangement intended for installation inside an appropriate industrial control cabinet or electrical enclosure.

2. Brand

Brand: Allen-Bradley

Allen-Bradley is widely associated with industrial automation equipment, motor-control systems and factory automation applications.

For this particular product, the brand designation is important when selecting compatible control equipment, communication architecture, accessories, replacement parts and related drive-family components.

The 20G1ANF119JN0NNNNN is specifically part of the high-power PowerFlex drive portfolio and is intended for industrial motor applications rather than small general-purpose machinery.

3. Product Series

Series: PowerFlex 755

The PowerFlex 755 series is designed for industrial AC motor control where adjustable speed, controlled acceleration and deceleration, process coordination, diagnostics and automation-network integration are required.

The series covers a broad range of power levels.

Within the 690 V range, the 20G1ANF119JN0NNNNN occupies the 119 A / 110 kW normal-duty position.

It is closely related to the 98 A model below it and the 142 A model above it, allowing the same general drive platform to be selected for different motor sizes.

4. Detailed Technical Parameter Table

Parameter	Specification
Model	20G1ANF119JN0NNNNN
Brand	Allen-Bradley
Series	PowerFlex 755
Product Type	AC Variable Frequency Drive
Input Voltage	690 VAC
Input Phase	3 Phase
Normal-Duty Power	110 kW
Heavy-Duty Power	90 kW
Continuous Output Current	119 A
1-Minute Current Class	131 A
3-Second Current Class	179 A
Frame Size	Frame 6
Cooling	Forced Air
Enclosure	IP20/IP00
Enclosure Type	NEMA/UL Open Type
Input Type	AC Input with Precharge
DC Terminals	No
Dynamic Braking	None
Filtering	Filtered
CM Jumper	Installed
HIM	None / Blank
Communication	Embedded EtherNet/IP
Motor Type	Three-Phase AC Motor
Control	Variable Frequency / Vector-Based Control
Installation	Industrial Control Cabinet
Approx. Dimensions	665.5 × 308 × 346.4 mm
Approx. Weight	14.5 kg (32 lb)
Cooling Requirement	Forced-Air Ventilation
Typical Ambient Range	Approx. 0–40/50°C depending on operating conditions and derating
Typical Applications	Pumps, fans, blowers, conveyors, mixers, process equipment
Application Level	High-Power Industrial

5. Electrical Rating

The central electrical specification of the 20G1ANF119JN0NNNNN is its 119 A output-current rating.

At normal duty, the drive is rated for approximately 110 kW.

At heavy duty, the drive is rated for approximately 90 kW.

This distinction is important because motor applications are not all subjected to the same mechanical loading.

A large centrifugal pump may operate primarily as a variable-torque load, while a conveyor, mixer or other mechanical system may require substantially more torque during acceleration.

For this reason, the drive should be selected according to the motor’s actual full-load current and application requirements rather than simply matching the motor’s nominal kW value.

6. Normal-Duty and Heavy-Duty Performance

The dual-rating concept provides flexibility when selecting the drive for different load types.

Duty Rating	Power Rating	Current Class	Typical Application
Normal Duty	110 kW	119 A	Pumps, fans, blowers and variable-torque loads
Heavy Duty	90 kW	119 A class	Conveyors, mixers, process machinery and higher-torque loads

The 110 kW normal-duty rating makes this model suitable for large continuously operating equipment.

The 90 kW heavy-duty rating provides a more conservative motor-power rating for applications where the mechanical load requires greater overload capability.

The actual motor nameplate current should always be checked before final drive selection.

7. Product Introduction

The 20G1ANF119JN0NNNNN is a high-power industrial variable frequency drive designed to control three-phase AC motors operating in 690 V electrical systems.

It is intended for applications where motor speed must be adjusted according to production or process requirements.

Instead of operating a motor continuously at a fixed speed, the drive can regulate motor speed, acceleration and deceleration.

This makes it suitable for large industrial machines where motor operation needs to be coordinated with the rest of the production system.

The 119 A output class places this model in the upper portion of the Frame 6 690 V range.

It is particularly appropriate for motors and machines requiring substantial power but still falling within the 110 kW normal-duty class.

The embedded EtherNet/IP capability also allows the drive to be incorporated into an industrial automation network.

A controller can provide speed references and operating commands while receiving status, fault and operating information from the drive.

8. 690 V High-Power Design

The 690 V rating is one of the most important characteristics of this model.

Large industrial motors often use higher-voltage electrical systems because high voltage allows substantial motor power to be transmitted with lower current than would be required at a lower voltage.

This makes the 690 V class particularly suitable for:

• Large pumps
• Industrial fans
• Large conveyors
• Process machinery
• Mining equipment
• Material-handling systems
• Large cooling systems
• Industrial utility equipment

The drive is therefore intended for industrial facilities with appropriately designed 690 V motor systems.

9. Frame 6 Mechanical Configuration

The 20G1ANF119JN0NNNNN uses Frame 6 construction.

Frame size affects the mechanical installation requirements, including:

• Mounting footprint
• Cabinet space
• Cable routing
• Cooling airflow
• Service access
• Terminal access
• Maintenance clearance

Because this is a high-power Frame 6 drive, the cabinet should not be designed around the drive body alone.

Additional space should be considered for incoming power cables, motor cables, grounding, control wiring and ventilation.

10. Dimensions and Weight

A practical reference dimension for the drive is approximately:

665.5 mm × 308 mm × 346.4 mm

Approximate product weight:

14.5 kg (32 lb)

These values should be treated as reference dimensions for planning purposes.

The final installation space can be larger than the physical drive dimensions because the cabinet must also accommodate:

• Cable bending radius
• Terminal access
• Ventilation clearance
• Input protection
• Disconnect equipment
• Control terminals
• Network connections
• Maintenance access

The final cabinet design should therefore allow sufficient working space around the drive.

11. Cooling System

The drive uses forced-air cooling.

A high-power drive produces considerable heat during normal operation, particularly when the motor is operating at high current for extended periods.

The forced-air cooling system moves air through the drive’s power section to remove heat.

The installation should provide suitable airflow around the drive.

Important considerations include:

• Ambient temperature
• Cabinet temperature
• Air inlet clearance
• Air outlet clearance
• Fan operation
• Dust accumulation
• Ventilation filters
• Cabinet heat dissipation
• Clearance from other heat-generating components

In dusty industrial environments, the cooling system should be inspected and cleaned at appropriate intervals.

12. Filtering and CM Jumper Configuration

The 20G1ANF119JN0NNNNN is configured with filtering and a CM jumper installed.

This configuration is relevant when the drive is integrated into an industrial electrical system where electromagnetic compatibility and common-mode considerations must be addressed.

The final installation should still be designed according to the complete electrical system, including:

• Motor cable type
• Cable length
• Grounding
• Shielding
• Cabinet construction
• Input filtering
• Other nearby electrical equipment

Correct installation practices are important for stable operation and communication performance.

13. No Dynamic Braking

Unlike the JA configuration of this model, the JN configuration does not include the dynamic braking transistor.

This distinction is important when comparing catalog numbers that appear very similar.

Model	Current	Normal Duty	Heavy Duty	Dynamic Braking
20G1ANF119JN0NNNNN	119 A	110 kW	90 kW	None
20G1ANF119JA0NNNNN	119 A	110 kW	90 kW	DB Transistor

The two models have the same principal voltage, current and power ratings, but their configurations are different.

When replacing an existing drive, the complete catalog number should therefore be matched instead of assuming that the two versions are interchangeable in every application.

14. Typical Applications

Large Industrial Pumps

The drive is suitable for large pump systems operating from 690 V three-phase power.

Typical applications include:

• Water circulation
• Industrial water systems
• Cooling-water pumps
• Process pumps
• Wastewater systems
• Mining water systems
• Chemical processing
• Industrial utility systems

Variable-speed operation allows pump speed to be adjusted to process requirements.

Large Fans and Blowers

Fans and blowers are another important application category.

Typical equipment includes:

• Industrial ventilation
• Furnace fans
• Exhaust systems
• Dust extraction
• Process-air systems
• Cooling systems
• Mining ventilation
• Large air-handling equipment

The 110 kW normal-duty rating provides capacity for many large industrial air-moving systems.

Conveyor Systems

The drive can be used to control large conveyor motors.

Typical benefits of variable-speed control include:

• Adjustable conveyor speed
• Controlled acceleration
• Controlled deceleration
• Reduced mechanical shock
• Coordination between conveyor sections
• Improved process synchronization

Potential applications include mining, aggregate handling, bulk material handling and large production systems.

Mixers and Agitators

Large mixers and agitators can require substantial motor power and controlled speed.

The drive can regulate motor speed according to process requirements.

Applications include:

• Chemical mixing
• Water treatment
• Material blending
• Industrial processing
• Slurry handling
• Food processing
• Process tanks

Process Machinery

The drive can also be used for general process machinery where motor speed needs to be controlled.

Examples include:

• Production machinery
• Material-processing equipment
• Large machine tools
• Industrial auxiliary systems
• Automated production equipment

15. Advantages of the Product

High-Voltage 690 V Operation

The 690 V rating makes the drive suitable for large industrial motor systems.

It is particularly useful in plants where high-power motors are already designed around 690 V electrical distribution.

110 kW Normal-Duty Rating

The 110 kW normal-duty capacity provides substantial motor-control capability for large pumps, fans and other continuous-duty machinery.

90 kW Heavy-Duty Rating

The heavy-duty rating allows the drive to be used with more demanding mechanical loads, provided the motor and application remain within the specified heavy-duty requirements.

119 A Output Rating

The 119 A current class gives the drive a substantial continuous operating range for large three-phase motors.

Motor nameplate current should always be checked against the drive rating before installation.

Forced-Air Cooling

Forced-air cooling provides a practical method for removing heat from a high-power drive.

With proper cabinet ventilation, it is suitable for industrial electrical installations.

Embedded EtherNet/IP

Integrated EtherNet/IP communication allows the drive to communicate with industrial controllers without requiring the same level of external communication hardware that would be needed in a completely standalone arrangement.

PowerFlex 755 Architecture

The PowerFlex 755 platform provides a broad set of motor-control and automation functions.

This makes the drive suitable for systems where motor control must be coordinated with other industrial equipment.

Filtered Configuration

The filtered configuration with CM jumper installed provides a defined factory configuration for the drive’s filtering arrangement.

This can simplify system design when the drive is installed according to the appropriate electrical and EMC practices.

16. Automation and Control Functions

The drive can be integrated into a larger automation system.

Typical control functions include:

• Start
• Stop
• Speed reference
• Frequency reference
• Direction
• Drive enable
• Fault reset
• Motor speed monitoring
• Motor current monitoring
• Drive status
• Alarm monitoring
• Fault monitoring
• Diagnostic information
• Parameter management
• Network-based control

The embedded EtherNet/IP interface is especially useful in PLC-based systems where drive operation needs to be coordinated with other machinery.

17. Installation Requirements

A high-power drive requires careful electrical and mechanical planning.

Input Power

The incoming electrical system should be suitable for the 690 V three-phase drive rating.

Appropriate upstream protection must be selected according to the complete installation.

Motor Cable

Motor cable selection should consider:

• Motor current
• Cable length
• Installation method
• Ambient temperature
• Voltage drop
• EMC requirements
• Applicable electrical standards

Grounding

A proper grounding system is essential for electrical safety and stable drive operation.

Cabinet Ventilation

Because the drive uses forced-air cooling, sufficient airflow must be available.

Cabinet Temperature

The total heat generated by the drive and other equipment must be considered when designing the cabinet.

Cable Routing

Power and control cables should be routed appropriately to reduce electrical interference.

18. Maintenance Recommendations

Regular maintenance helps maintain stable operation and reduce unexpected downtime.

Recommended checks include:

• Cooling fan inspection
• Ventilation inspection
• Dust removal
• Power-terminal inspection
• Grounding inspection
• Motor-cable inspection
• Control-wiring inspection
• Network-cable inspection
• Fault-history review
• Cabinet-temperature monitoring
• Inspection for overheating
• Inspection for abnormal noise
• Inspection for unusual vibration

Cooling-system maintenance is especially important for high-power drives.

19. Recommended Same-Series Models

The following models are close alternatives within the same PowerFlex 755 690 V family.

Model	Series	Voltage	Current	Normal Duty	Heavy Duty	Frame	Cooling	Approx. Dimensions	Approx. Weight
20G1ANF061JN0NNNNN	PowerFlex 755	690 V	61 A	55 kW	45 kW	Frame 6	Forced Air	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF082JN0NNNNN	PowerFlex 755	690 V	82 A	75 kW	55 kW	Frame 6	Forced Air	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF098JN0NNNNN	PowerFlex 755	690 V	98 A	90 kW	75 kW	Frame 6	Forced Air	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF119JN0NNNNN	PowerFlex 755	690 V	119 A	110 kW	90 kW	Frame 6	Forced Air	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF142JN0NNNNN	PowerFlex 755	690 V	142 A	132 kW	110 kW	Frame 6	Forced Air	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg

The five models provide a convenient progression from 55 kW through 132 kW normal-duty operation.

For an application requiring a slightly smaller drive, the 98 A version is a logical comparison.

For a higher motor-power requirement, the 142 A model provides the next larger rating within the same general Frame 6 690 V group.

20. Same-Series Electrical Comparison

Model	Voltage	Continuous Current	1-Minute Current	3-Second Current	Normal Duty	Heavy Duty
20G1ANF061JN0NNNNN	690 V	61 A	67 A	92 A	55 kW	45 kW
20G1ANF082JN0NNNNN	690 V	82 A	90 A	123 A	75 kW	55 kW
20G1ANF098JN0NNNNN	690 V	98 A	108 A	147 A	90 kW	75 kW
20G1ANF119JN0NNNNN	690 V	119 A	131 A	179 A	110 kW	90 kW
20G1ANF142JN0NNNNN	690 V	142 A	156 A	213 A	132 kW	110 kW

This comparison shows the gradual increase in current and motor-power capability across the 690 V range.

21. Five Related Models from the Same Brand

Model	Series	Voltage	Current	Normal Duty	Heavy Duty	Typical Application	Approx. Dimensions	Approx. Weight
20G1ANF082JN0NNNNN	PowerFlex 755	690 V	82 A	75 kW	55 kW	Pumps, fans, conveyors	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF098JN0NNNNN	PowerFlex 755	690 V	98 A	90 kW	75 kW	Large pumps and fans	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF142JN0NNNNN	PowerFlex 755	690 V	142 A	132 kW	110 kW	High-power process machinery	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF171JN0NNNNN	PowerFlex 755	690 V	171 A	160 kW	132 kW	Large industrial motors	Frame 7 class	Configuration dependent
20G1AGF119JN0NNNNN	PowerFlex 755	690 V	119 A	110 kW	90 kW	Enclosed industrial installations	Frame 6 class	Configuration dependent

The 20G1AGF119JN0NNNNN is especially relevant when an installation requires a different enclosure arrangement.

The G configuration represents an IP54/NEMA Type 12 packaged/open-drive arrangement, while the 20G1ANF119JN0NNNNN is the IP20/IP00 open-type configuration.

22. Five Popular Models from the Same Brand

Model	Series	Voltage Class	Current	Power Rating	Typical Application	Approx. Dimensions	Approx. Weight
20G1ANF098JN0NNNNN	PowerFlex 755	690 V	98 A	90 kW ND / 75 kW HD	Large pumps, fans, conveyors	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF119JN0NNNNN	PowerFlex 755	690 V	119 A	110 kW ND / 90 kW HD	Large process equipment	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20G1ANF142JN0NNNNN	PowerFlex 755	690 V	142 A	132 kW ND / 110 kW HD	High-power machinery	Approx. 665.5 × 308 × 346.4 mm	Approx. 14.5 kg
20F1ANF061JN0NNNNN	PowerFlex 753	690 V	61 A	55 kW class	Industrial pumps and fans	Configuration dependent	Configuration dependent
25B-D043N114	PowerFlex 525	380–480 V	43 A	Approx. 22 kW class	General industrial machinery	Frame dependent	Frame dependent

These models cover different areas of the industrial drive portfolio, from compact general-purpose applications to large high-power motor systems.

23. PowerFlex 755 690 V Selection Guide

Normal-Duty Power	Model	Output Current	Heavy-Duty Power	Frame
55 kW	20G1ANF061JN0NNNNN	61 A	45 kW	6
75 kW	20G1ANF082JN0NNNNN	82 A	55 kW	6
90 kW	20G1ANF098JN0NNNNN	98 A	75 kW	6
110 kW	20G1ANF119JN0NNNNN	119 A	90 kW	6
132 kW	20G1ANF142JN0NNNNN	142 A	110 kW	6
160 kW	20G1ANF171JN0NNNNN	171 A	132 kW	7
200 kW	20G1ANF212JN0NNNNN	212 A	160 kW	7
250 kW	20G1ANF263JN0NNNNN	263 A	200 kW	7

This range allows the PowerFlex 755 platform to cover a substantial portion of large 690 V motor applications.

24. Application Advantages for Pumps

For large pump applications, variable-speed operation can be useful when flow and pressure requirements change throughout the process.

Instead of running a motor continuously at a fixed speed, the drive can adjust speed according to the process requirement.

This can provide:

• Adjustable flow
• Adjustable pressure
• Controlled acceleration
• Controlled deceleration
• Reduced mechanical shock
• Improved process coordination

The 110 kW normal-duty capacity makes the model suitable for large pump installations.

25. Application Advantages for Fans and Blowers

Large fans and blowers often require variable operating speeds.

The drive can provide speed adjustment while maintaining controlled motor operation.

Typical applications include:

• Industrial ventilation
• Exhaust systems
• Furnace airflow
• Dust collection
• Process cooling
• Mining ventilation
• Large air-handling equipment

The high-voltage architecture is suitable for large motor installations where 690 V power distribution is available.

26. Application Advantages for Conveyors

Conveyor systems can benefit from controlled acceleration and adjustable speed.

The drive can help coordinate motor operation with production requirements.

This is particularly useful for:

• Bulk material handling
• Mining
• Aggregate processing
• Production lines
• Packaging systems
• Warehouse material handling
• Transfer conveyors

Where braking or rapid deceleration is required, the braking system should be evaluated separately because this JN configuration does not include the dynamic braking transistor.

27. Application Advantages for Process Machinery

Large process machines frequently require stable motor speed and controlled acceleration.

Examples include:

• Mixers
• Agitators
• Process pumps
• Large fans
• Material-processing equipment
• Industrial auxiliary machinery

The drive can become part of the plant automation system through its integrated network communication capability.

28. Maintenance and Service Considerations

The drive should be periodically inspected as part of the plant’s electrical maintenance program.

Recommended inspections include:

Cooling fans: Check for abnormal noise, vibration or reduced airflow.

Ventilation paths: Make sure air passages remain clear.

Power connections: Inspect for loose or overheated terminals.

Grounding: Verify that grounding connections remain secure.

Motor cables: Check for physical damage and connection problems.

Cabinet environment: Monitor temperature, humidity and dust.

Network connections: Check communication cables and connectors.

Fault history: Review recurring faults rather than simply resetting them.

Electrical condition: Look for signs of overheating, discoloration or abnormal odor.

29. Selection and Replacement Guide

When selecting this model for a new installation, the following points should be reviewed together:

Motor Voltage

The motor should be appropriate for the 690 V system.

Motor Current

The motor nameplate full-load current should be within the appropriate drive rating.

Duty

Determine whether the machine is a normal-duty or heavy-duty application.

Acceleration

High-inertia loads may require special attention to acceleration time and current requirements.

Deceleration

If rapid stopping is required, braking requirements must be evaluated.

Communication

Determine whether the drive will operate independently or as part of a PLC-based control network.

Cabinet

Verify that the enclosure has adequate space, cooling and service clearance.

Environment

Consider temperature, dust, humidity, altitude and vibration.

Existing Configuration

For replacement work, compare the complete catalog number rather than only the voltage and kW rating.

30. Consolidated Product Parameter Table

Parameter	Specification
Model	20G1ANF119JN0NNNNN
Brand	Allen-Bradley
Series	PowerFlex 755
Product Category	AC Variable Frequency Drive
Input Voltage	690 VAC
Input Phase	Three Phase
Output Current	119 A
Normal-Duty Rating	110 kW
Heavy-Duty Rating	90 kW
1-Minute Current Class	131 A
3-Second Current Class	179 A
Frame Size	Frame 6
Cooling Method	Forced Air
Enclosure	IP20/IP00
Enclosure Type	NEMA/UL Open Type
Input Configuration	AC Input with Precharge
DC Terminals	No
Dynamic Braking	None
Filtering	Filtered
CM Jumper	Installed
HIM	Blank / No HIM
Communication	Embedded EtherNet/IP
Motor Type	Three-Phase AC Motor
Approx. Dimensions	665.5 × 308 × 346.4 mm
Approx. Weight	14.5 kg (32 lb)
Installation	Industrial Cabinet / Panel
Main Applications	Pumps, Fans, Blowers, Conveyors, Mixers, Process Machinery
Cooling Requirement	Forced-Air Ventilation
Application Level	High-Power Industrial

31. Product Advantages Summary

Feature	Advantage
690 V Operation	Suitable for large high-voltage industrial motors
119 A Output	Provides substantial current capacity for large motors
110 kW Normal Duty	Suitable for large continuous-duty equipment
90 kW Heavy Duty	Supports more demanding load profiles
Frame 6	Suitable for high-power industrial installations
Forced-Air Cooling	Provides active heat removal
Embedded EtherNet/IP	Supports integration with industrial automation systems
Filtered Configuration	Provides a defined filtering arrangement
CM Jumper Installed	Supports the configured common-mode/filtering setup
Open-Type Construction	Suitable for installation inside an industrial cabinet
PowerFlex 755 Platform	Provides broad motor-control functionality
No Dynamic Braking	Simplifies configuration where dynamic braking is not required

32. Short Industrial Catalog Description

The Allen-Bradley 20G1ANF119JN0NNNNN PowerFlex 755 is a 690 VAC, three-phase industrial AC variable frequency drive rated at 119 A, with a 110 kW normal-duty rating and 90 kW heavy-duty rating.

The drive features Frame 6 construction, forced-air cooling, IP20/IP00 NEMA/UL open-type construction, AC input with precharge, no DC terminals, filtered configuration with CM jumper installed, no dynamic braking transistor, and embedded EtherNet/IP communication.

It is designed for large industrial motor applications including pumps, fans, blowers, conveyors, mixers and process machinery.

With its 690 V electrical rating and 119 A output capacity, the drive is particularly suited to high-power industrial motor systems where adjustable speed, controlled acceleration and integration with a plant automation system are required.

33. Final Summary

The 20G1ANF119JN0NNNNN is a high-power member of the PowerFlex 755 series.

Its principal specifications are:

Brand: Allen-Bradley

Series: PowerFlex 755

Model: 20G1ANF119JN0NNNNN

Input Voltage: 690 VAC

Phase: Three Phase

Output Current: 119 A

Normal-Duty Power: 110 kW

Heavy-Duty Power: 90 kW

Frame: Frame 6

Cooling: Forced Air

Enclosure: IP20/IP00 NEMA/UL Open Type

Input: AC Input with Precharge

DC Terminals: None

Dynamic Braking: None

Filtering: Filtered

CM Jumper: Installed

HIM: None / Blank

Communication: Embedded EtherNet/IP

Approximate Dimensions: 665.5 × 308 × 346.4 mm

Approximate Weight: 14.5 kg (32 lb)

The model is designed for large industrial motor-control applications where high-voltage operation, substantial output current, adjustable speed and industrial network integration are required.

It is particularly suitable for large pumps, fans, blowers, conveyors, mixers, process machinery and other high-power motor-driven equipment.

For replacement or new-project selection, the most important factors are the motor nameplate voltage, full-load current, duty classification, acceleration requirements, deceleration requirements, braking requirements, environmental conditions and available cabinet space.

The JN configuration should not be confused with the similarly rated JA configuration, because the braking and configuration details are different. For a direct replacement, the complete catalog number should be matched before installation.