Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

Product Overview

The Ingersoll Rand 47623602001 / 24266223 Hose is an industrial replacement hose associated with compatible Ingersoll Rand compressor equipment. Hose assemblies are important connection components in compressor systems because they provide flexible pathways between different assemblies while accommodating the movement and vibration that can occur during normal equipment operation.

The specified hose length for Ingersoll Rand 24266223 is 44 inches, while the listed shipping weight is 3 kg. These specifications are particularly useful when identifying replacement parts, planning compressor maintenance, managing spare-parts inventory, and preparing components for transportation.

The component is identified by reference number 47623602001 and part number 24266223. Both identifiers should be checked carefully when purchasing or replacing the hose. Similar-looking compressor hoses may have different lengths, connection arrangements, routing requirements, or intended system applications.

The exact hose material, internal diameter, fitting configuration, pressure rating, temperature rating, and service-medium compatibility are not specified in the supplied information. These characteristics should be verified against the original equipment documentation and the existing compressor installation before replacement.

---

Technical Specifications

Parameter	Specification
Manufacturer	Ingersoll Rand
Reference Number	47623602001
Part Number	24266223
Product Type	Hose
Application	Compatible Industrial Compressor Systems
Hose Length	44 in
Shipping Weight	3 kg
Installation	Compressor-System Hose Connection
Typical Use	Compressor Maintenance and Replacement
Replacement Identification	Verify complete reference and part number

Important: The supplied 3 kg value is the shipping weight. It should not be interpreted as the net weight of the hose itself.

---

What Is the Ingersoll Rand 24266223 Hose?

The Ingersoll Rand 24266223 is a replacement hose identified under reference 47623602001.

In an industrial compressor, flexible hoses are used to establish connections between compatible components while allowing the system to accommodate appropriate mechanical movement. Depending on the original equipment configuration, a hose can form part of an air, oil, cooling, control, or other designated circuit.

The exact service function of 24266223 depends on the compressor model and installation in which it is used. For this reason, the complete part number should always be matched with the original equipment configuration.

A generalized arrangement can be represented as:

Compressor Assembly → Flexible Hose → Connected Compressor Component

The actual connection points and flow path should be verified before removing the original hose.

---

Function of the Compressor Hose

Flexible Component Connection

The primary mechanical role of a hose is to provide a flexible connection between compatible system components.

Compared with a completely rigid connection, a properly selected hose can accommodate limited movement between assemblies.

Vibration Accommodation

Screw compressors contain rotating equipment that can generate vibration during operation. Flexible connections can help accommodate appropriate vibration and reduce the mechanical stress that could otherwise be transferred directly through rigid piping.

Air or Fluid Transfer

A hose may form part of a designated compressor air or fluid circuit. The exact medium carried by 24266223 should be confirmed from the compressor’s original system documentation rather than assumed from the part number alone.

Maintenance Accessibility

Flexible connections can simplify maintenance because they may allow assemblies to be separated without extensive modification of rigid piping.

---

Role in Screw Compressor Systems

Industrial screw compressors consist of interconnected mechanical, pneumatic, fluid, electrical, and control systems.

A simplified compressor arrangement may include:

Air Intake → Compression Element → Separation → Cooling → Compressed-Air Delivery

Other circuits may include:

• Compressor oil circulation
• Cooling circuits
• Pneumatic control
• Instrumentation
• Pressure regulation
• Condensate management

Flexible hose assemblies can form part of these interconnected systems.

The 47623602001 / 24266223 hose therefore serves as a replacement connection component when the compressor configuration requires this specific part.

---

44 in Hose Length and Replacement Planning

The specified hose length is:

44 in

This length should be carefully considered during compressor maintenance.

A replacement hose should follow the original routing without being stretched between connection points. A hose that is too short may be subjected to unnecessary tension, while an excessively long hose may create unwanted loops or contact surrounding equipment.

Before installation, technicians should compare the replacement with the original component and verify:

• Overall hose length
• Connection locations
• End orientation
• Routing path
• Bend requirements
• Clearance from nearby equipment
• Support arrangements
• Movement during operation

The 44 in dimension should therefore be considered together with the physical layout of the compressor system.

---

Industrial Applications

Industrial Screw Compressors

The 24266223 Hose is intended as a replacement component for compatible Ingersoll Rand compressor equipment.

Factory Compressed-Air Systems

Compressed air is widely used in manufacturing for pneumatic tools, actuators, valves, production machinery, instrumentation, and process equipment.

Reliable hose connections are an important part of maintaining compressor-system integrity.

Manufacturing Facilities

Manufacturing plants often depend on continuous compressed-air availability. Damaged or leaking hose assemblies can contribute to maintenance problems and unnecessary downtime.

Compressor Service Operations

During scheduled compressor maintenance, hoses can be inspected for wear, leakage, abrasion, deformation, and connection problems.

Compressor Overhaul

During a larger compressor overhaul, flexible hose assemblies can be inspected together with filters, separators, valves, fittings, sensors, and other service components.

---

Installation Guidelines

The compressor must be safely shut down before replacing the Ingersoll Rand 24266223 Hose.

Step 1: Shut Down the Compressor

Follow the normal compressor shutdown procedure specified for the equipment.

Step 2: Isolate the Energy Supply

Electrical power and other relevant energy sources should be isolated before maintenance.

Step 3: Depressurize the System

Compressed-air and fluid systems may retain stored energy after shutdown.

The relevant circuit should be safely depressurized before disconnecting the hose.

Step 4: Verify the Replacement

Confirm:

47623602001 / 24266223

and verify the specified hose length:

44 in

Step 5: Document Existing Routing

Before removing the original hose, observe its routing and connection orientation.

A photograph or maintenance record can be useful for complex installations.

Step 6: Inspect Connection Points

Check fittings, sealing surfaces, and adjacent components for:

• Damage
• Corrosion
• Contamination
• Wear
• Seal deterioration

Step 7: Install the Replacement

Install the hose without twisting or stretching it.

The hose should naturally follow the intended routing path.

Step 8: Perform a Leak Check

After installation, restore pressure gradually and inspect the hose and connections for leakage.

---

Hose Routing and Mechanical Protection

Correct hose routing is essential for long-term reliability.

The 44 in hose should be positioned so that it is not subjected to unnecessary mechanical stress.

Avoid:

• Excessive bending
• Twisting
• Stretching
• Crushing
• Sharp-edge contact
• Continuous abrasion
• Contact with rotating machinery
• Unnecessary heat exposure

The hose should have sufficient clearance from components that move during compressor operation.

If the original hose shows abrasion at a particular point, simply installing another hose without correcting the routing may result in repeated failure.

---

Inspection and Condition Monitoring

Regular hose inspection can identify developing problems before they cause an unexpected compressor shutdown.

Surface Inspection

Check for:

• Cracks
• Cuts
• Abrasion
• Deformation
• Swelling
• Surface deterioration

Connection Inspection

Examine the hose connection areas for leakage, looseness, corrosion, and damaged sealing components.

Routing Inspection

Verify that the hose remains in its intended position.

Vibration and maintenance activity can gradually alter hose routing.

Leakage Monitoring

Any visible or suspected leakage should be investigated promptly.

Vibration Monitoring

Unexpected compressor vibration can increase mechanical stress on flexible connections. If hose failures occur repeatedly, the overall equipment condition should be investigated.

---

Troubleshooting Guide

Hose Leakage

Possible causes include:

• Hose deterioration
• Damaged connection
• Seal failure
• Incorrect installation
• Excessive mechanical stress
• Unsuitable operating conditions

Inspect both the hose body and the connection points.

Abrasion or Surface Wear

If the hose contacts another component during operation, repeated movement can cause abrasion.

Check:

• Hose routing
• Clearance
• Support points
• Nearby brackets
• Adjacent piping
• Equipment vibration

Correct the mechanical cause before fitting a new hose.

Premature Hose Failure

Premature failure may be associated with:

• Excessive vibration
• Incorrect routing
• Excessive bending
• Twisting
• Abrasion
• Heat exposure
• Incorrect component selection
• Operating conditions outside the intended application

Replacing the hose without investigating the underlying cause may lead to repeated maintenance problems.

Replacement Hose Does Not Fit

If the replacement cannot be positioned naturally, verify:

• Reference number
• Part number
• Hose length
• Connection arrangement
• End orientation
• Compressor model
• Original routing

Do not force the hose into a position that creates excessive stress.

Leakage After Installation

If leakage is detected after replacement, inspect the fittings and sealing areas.

The issue may be associated with the connection, alignment, or sealing surface rather than the hose itself.

---

Preventive Maintenance

Scheduled Hose Inspection

Include flexible hose assemblies in routine compressor maintenance inspections.

Connection Checks

Inspect fittings and connection areas for leakage and mechanical deterioration.

Routing Checks

Confirm that the hose has not shifted or become exposed to new abrasion points.

Vibration Checks

Unusual vibration should be investigated because it can accelerate wear of flexible components.

Condition-Based Replacement

A hose showing significant deterioration should be evaluated and replaced according to the equipment maintenance requirements.

Spare-Part Planning

For critical compressor installations, maintaining replacement hoses in inventory can help reduce downtime.

The spare should be recorded using the complete identification:

47623602001 / 24266223

---

Shipping Weight and Spare-Part Logistics

The supplied shipping weight is:

3 kg

This value is useful for transportation and logistics planning.

It should not be treated as the net weight of the hose.

For spare-parts management, the following information can be recorded:

Inventory Information	Value
Reference Number	47623602001
Part Number	24266223
Product Type	Hose
Hose Length	44 in
Shipping Weight	3 kg

Recording the hose length together with the complete part number helps distinguish this component from other hose assemblies.

---

Replacement Considerations

When purchasing a replacement for the Ingersoll Rand 47623602001 / 24266223 Hose, the complete identification should be verified.

The supplied specifications are:

• Reference Number: 47623602001
• Part Number: 24266223
• Product Type: Hose
• Hose Length: 44 in
• Shipping Weight: 3 kg

Additional characteristics should be confirmed for the specific compressor installation, including:

• Hose construction
• Internal diameter
• End fittings
• Connection type
• Pressure requirements
• Temperature requirements
• Service-medium compatibility
• Bend requirements
• Routing limitations
• Compressor model

Physical similarity alone should not be used as proof of compatibility.

---

Compatible Compressor System Components

A typical industrial compressor system can include multiple components that work together:

Component	Typical Function
Compressor Element	Compresses air
Hose Assembly	Provides flexible connection
Oil Filter	Filters compressor oil
Air Filter	Filters intake air
Air-Oil Separator	Separates oil from compressed air
Cooler	Controls operating temperature
Valves	Regulates air or fluid flow
Sensors	Monitors operating conditions
Control System	Manages compressor operation
Electrical System	Supplies and controls equipment

The exact components associated with the 24266223 hose depend on the compressor model and system design.

---

Related Ingersoll Rand Replacement Components

Reference / Part	Product Type	General Function
47623601001 / 24900433	Oil Filter	Compressor oil filtration
47623601001 / 47605764001	Panel Air Filter	Air filtration
47623601001 / 23708423	Air-Oil Separator	Air/oil separation
47623601001 / 88089743	Breathing Filter	Compressor filtration
47623601001 / 24900318	Air Filter	Intake air filtration
47623601001 / 24266058	Hose	Flexible compressor connection
47623601001 / 24266207	Hose	Flexible compressor connection
47623601001 / 24266215	Hose	Flexible compressor connection
47623601001 / 24266223	Hose	Flexible compressor connection
47623601001 / 85574374	Hose	Flexible compressor connection

These related components should not automatically be considered interchangeable. The complete part number and compressor application must be verified.

---

Storage Recommendations

A replacement 24266223 Hose should be stored in a clean and suitable environment.

Avoid prolonged exposure to:

• Direct sunlight
• Excessive heat
• Moisture
• Chemicals
• Sharp objects
• Mechanical compression

The hose should not be stored under severe bends or loads that could permanently deform it.

Maintaining the original identification label or packaging can also help prevent part-number confusion during future maintenance.

---

Engineering Best Practices

Several practices can improve hose replacement reliability.

Verify Before Removal

Record the original hose routing and connection orientation before dismantling the system.

Match the Complete Part Number

Use 47623602001 / 24266223, rather than relying only on visual similarity.

Protect Against Abrasion

Ensure that the installed hose does not continuously contact surrounding structures.

Avoid Twisting

The hose should be installed without torsional stress.

Maintain Appropriate Clearance

Allow sufficient space for normal equipment movement and vibration.

Inspect Adjacent Components

If a hose fails, inspect nearby fittings, brackets, piping, and equipment for the cause.

Test After Installation

Restore system pressure gradually and perform an appropriate inspection for leakage.

---

Key Advantages

• Ingersoll Rand compressor replacement hose
• Complete identification: 47623602001 / 24266223
• Supplied hose length of 44 in
• Suitable for compatible industrial compressor systems
• Provides a flexible connection between system components
• Supports compressor maintenance and overhaul activities
• Useful for preventive maintenance planning
• Helps simplify spare-parts identification
• Supplied shipping weight of 3 kg
• Suitable for industrial compressor replacement logistics

---

Technical FAQs

What is the Ingersoll Rand 24266223?

The Ingersoll Rand 24266223 is an industrial Hose associated with reference number 47623602001.

What is the hose length?

The specified hose length is 44 inches.

What is the shipping weight?

The specified shipping weight is 3 kg. This is a shipping/logistics value and should not be interpreted as the net weight of the hose.

What does the hose do?

The hose provides a flexible connection between compatible compressor-system components. Its exact service function depends on the original compressor configuration.

Can the 24266223 hose be installed on any Ingersoll Rand compressor?

No. Compatibility should be confirmed using the complete 47623602001 / 24266223 identification and the specific compressor model and system configuration.

Why is hose length important?

The 44 in length determines how the hose can be routed between connection points. Incorrect length can create excessive tension, bending, loops, or interference.

What should be checked before installation?

Verify the complete part number, hose length, connection arrangement, end orientation, routing, fittings, operating requirements, and compatibility with the compressor.

What can cause hose failure?

Potential causes include abrasion, excessive bending, twisting, vibration, heat exposure, damaged fittings, incorrect routing, or unsuitable operating conditions.

Is the 3 kg specification the hose’s net weight?

No. The supplied specification is Shipping Weight: 3 kg.

How should this part be ordered?

The replacement should be identified using:

Ingersoll Rand 47623602001 / 24266223 Hose, 44 in

The compressor application should also be checked before ordering.

---

Conclusion

The Ingersoll Rand 47623602001 / 24266223 Hose is an industrial replacement hose designed for use in compatible Ingersoll Rand compressor systems. As a flexible connection component, it can support the interconnection of compressor assemblies while accommodating appropriate movement and vibration within its intended application.

The supplied hose length is 44 inches, which makes accurate dimensional verification important during replacement. Correct routing and installation help prevent excessive bending, twisting, stretching, abrasion, and mechanical interference. The supplied 3 kg shipping weight should be used for logistics and transportation planning rather than as the net component weight.

During replacement, the compressor should be safely shut down, relevant energy sources isolated, and the applicable circuit depressurized before the existing hose is removed. The replacement should then be checked against the complete 47623602001 / 24266223 identification, installed without unnecessary mechanical stress, and inspected for leakage after the system is returned to service.

For reliable compressor maintenance, technicians should verify not only the part number and 44 in length but also the actual connection arrangement and operating requirements of the installation. Exact hose construction, internal diameter, fittings, pressure rating, temperature rating, and service-medium compatibility should be confirmed against the appropriate equipment documentation before installation.