Company Information
E-mail		[email protected]
Mobile		+8615980777398
Whatsapp		+8615980777398
WeChat		15980777398

Product Overview

The Ingersoll Rand 47623602001 / 24266207 Hose is an industrial replacement hose designed for use in compatible Ingersoll Rand compressor systems. Flexible hose assemblies provide important connection points within industrial equipment, allowing different components to be connected while accommodating appropriate movement, vibration, and maintenance requirements.

The supplied hose length for Ingersoll Rand 24266207 is 32 inches, and the listed shipping weight is 3 kg. These specifications are useful for replacement identification, spare-parts inventory management, compressor maintenance planning, and transportation preparation.

The component is identified by the reference 47623602001 and part number 24266207. Both identifiers should be verified when ordering a replacement because compressor hoses with similar external appearance may have different dimensions, connection arrangements, routing requirements, or intended applications.

The exact hose material, internal diameter, end fittings, pressure rating, temperature rating, and media compatibility are not specified here. These characteristics should be confirmed against the original installation and the requirements of the specific compressor system before replacement.

---

Technical Specifications

Parameter	Specification
Manufacturer	Ingersoll Rand
Reference Number	47623602001
Part Number	24266207
Product Type	Hose
Application Category	Compressor Replacement Part
Hose Length	32 in
Shipping Weight	3 kg
Typical Application	Compatible industrial compressor systems
Installation	Compressor-system hose connection
Replacement Requirement	Verify complete part number and system configuration

Technical note: The supplied 3 kg value is the shipping weight and should not be interpreted as the net weight of the hose itself. Exact hose construction and operating specifications should be verified for the intended application.

---

What Is the Ingersoll Rand 24266207 Hose?

The Ingersoll Rand 24266207 is identified as a replacement hose associated with reference 47623602001.

Hoses provide flexible connections between compatible compressor-system components. Their flexibility can help accommodate normal equipment movement and vibration and can simplify certain maintenance procedures.

A generalized arrangement can be represented as:

Compressor Assembly → 24266207 Hose → Connected System Component

The actual installation location depends on the compressor model and system configuration.

A hose may be used within an air, oil, cooling, control, or other designated circuit depending on its original application. The exact service medium for 24266207 should therefore be confirmed before installation.

---

Function of the Compressor Hose

Flexible Connection

The hose provides a flexible connection between equipment assemblies that may experience relative movement during operation.

This can be useful where rigid piping would introduce unnecessary mechanical stress.

Vibration Accommodation

Industrial screw compressors contain rotating machinery and can generate mechanical vibration.

A properly selected and correctly routed hose can accommodate appropriate vibration within its intended application.

Maintenance Accessibility

Flexible hose connections can make equipment disassembly and servicing more practical.

A hose can often be removed and replaced without modifying permanent rigid piping.

Air or Fluid Transfer

Depending on the original system configuration, the hose may form part of a designated air or fluid circuit.

The exact medium and operating conditions should be verified from the compressor system documentation.

---

Role in Industrial Compressor Systems

A screw compressor installation typically consists of multiple mechanical, pneumatic, fluid, electrical, and control components.

A generalized system can include:

Air Intake → Compression Element → Separation / Treatment → Cooling → Compressed-Air Outlet

Additional circuits may include:

• Compressor oil circulation
• Cooling
• Pneumatic control
• Instrumentation
• Condensate management
• Pressure control

Flexible hose assemblies can be installed at suitable connection points within these systems.

The 24266207 therefore functions as a replacement connection component within a compatible compressor configuration.

---

Hose Length and Replacement Planning

The specified hose length is:

32 in

Length is an important factor when selecting a compressor replacement hose.

A hose that is too short may be installed under tension. Excessive tension can place unnecessary stress on the hose and fittings.

A hose that is too long may create unnecessary loops or contact surrounding equipment.

Before installation, technicians should compare the replacement with the original hose and verify:

• Overall length
• Connection locations
• End orientation
• Routing path
• Bend requirements
• Clearance
• Support points

The 32 in length should be considered together with the actual routing requirements of the compressor.

---

Industrial Applications

Screw Compressor Equipment

The 24266207 is intended as a replacement hose for a compatible Ingersoll Rand compressor configuration.

Factory Compressed-Air Systems

Industrial plants use compressed air for pneumatic actuators, tools, machinery, process equipment, and control applications.

Reliable compressor components help maintain the availability of these systems.

Manufacturing Facilities

Manufacturing environments often depend on continuous compressor operation.

Proper inspection and replacement of hoses can help prevent avoidable leaks and unplanned equipment downtime.

Compressor Maintenance

Hoses can be inspected during preventive maintenance and replaced when deterioration, leakage, abrasion, or other damage is identified.

Compressor Overhaul

During major compressor service, flexible connections can be checked together with filters, separators, valves, fittings, and other system components.

---

Installation Guidelines

Before installing the Ingersoll Rand 24266207 Hose, the compressor should be safely shut down and isolated.

1. Stop the Compressor

Follow the normal compressor shutdown procedure.

2. Isolate Energy Sources

Disconnect or isolate the electrical supply and other relevant energy sources.

3. Depressurize the Circuit

Compressed-air and fluid circuits may retain stored energy after shutdown.

Safely release pressure from the relevant circuit before removing the existing hose.

4. Verify the Replacement

Confirm:

47623602001 / 24266207

and verify the specified 32 in length.

5. Record Existing Routing

Observe the original hose routing and connection orientation before removing the old component.

6. Inspect Fittings

Check the connection points for:

• Corrosion
• Damage
• Contamination
• Seal deterioration
• Mechanical wear

7. Install the Hose

Install the replacement without twisting, stretching, or forcing the hose.

8. Check Clearance

Make sure the hose does not interfere with moving components or sharp edges.

9. Perform a Leak Check

After installation, restore pressure gradually and inspect the hose and connections for leakage.

---

Hose Routing and Mechanical Protection

Correct routing is essential for maintaining hose service life.

The 32 in hose should be installed with an appropriate natural path.

Avoid:

• Excessive bending
• Twisting
• Stretching
• Crushing
• Sharp-edge contact
• Continuous abrasion
• Contact with rotating equipment
• Unnecessary exposure to high temperatures

If the original hose has visible wear in a particular area, the underlying cause should be investigated before installing the replacement.

---

Inspection and Condition Monitoring

Regular inspection can help identify hose deterioration before a major failure occurs.

Surface Condition

Look for:

• Cracks
• Cuts
• Abrasion
• Deformation
• Swelling
• Surface deterioration

Connection Condition

Inspect fittings and seals for signs of leakage or mechanical damage.

Routing Condition

Confirm that the hose remains correctly positioned and has not moved due to vibration or previous maintenance work.

Leakage

Any leakage should be investigated promptly.

Vibration

Unusual compressor vibration can increase mechanical stress on flexible hose assemblies.

---

Troubleshooting Guide

Hose Leakage

Possible causes include:

• Hose deterioration
• Damaged fittings
• Seal failure
• Incorrect installation
• Mechanical stress
• Unsuitable operating conditions

Inspect the complete hose assembly and its connection points.

Hose Abrasion

Abrasion can occur when the hose repeatedly contacts:

• Brackets
• Piping
• Cabinet structures
• Machine surfaces
• Sharp edges

Correct the routing before installing another replacement.

Premature Hose Failure

If the replacement hose fails earlier than expected, investigate:

• Hose routing
• Vibration
• Bending
• Twisting
• Abrasion
• Temperature exposure
• Operating conditions
• Correct part selection

Repeated hose failure may indicate an underlying installation or equipment problem.

Hose Does Not Fit

If the replacement cannot be installed naturally, verify:

• Complete part number
• Hose length
• Connection configuration
• End orientation
• Compressor model
• Original routing

Never force an incorrectly matched hose into position.

Connection Leakage After Replacement

If leakage remains after hose replacement, inspect the fittings, seals, connection surfaces, and alignment.

The problem may be associated with the connection rather than the hose body.

---

Preventive Maintenance

Inspect the Hose

Include the hose in scheduled compressor inspections.

Check Connections

Inspect fittings and sealing areas for leakage and deterioration.

Monitor Routing

Confirm that vibration or maintenance activity has not altered the intended hose path.

Monitor Compressor Vibration

Unusual vibration should be investigated because it can accelerate wear of flexible connections.

Replace Damaged Hoses

A hose showing significant deterioration should be evaluated and replaced according to the compressor maintenance requirements.

Maintain Spare Inventory

For critical compressor installations, keeping replacement hoses available can reduce downtime.

Record the full identification:

47623602001 / 24266207

---

Shipping Weight and Logistics

The supplied shipping weight is:

3 kg

This figure should be used for shipping and transportation planning.

It should not be interpreted as the net weight of the hose.

For spare-parts inventory, useful information includes:

• Reference number
• Part number
• Hose length
• Quantity
• Shipping weight
• Compressor application
• Storage location

The 32 in length should be clearly recorded to distinguish the component from other similar hose assemblies.

---

Replacement Considerations

When sourcing a replacement for the Ingersoll Rand 47623602001 / 24266207 Hose, verify the complete part identification.

Supplied specifications:

• Reference: 47623602001
• Part Number: 24266207
• Product Type: Hose
• Hose Length: 32 in
• Shipping Weight: 3 kg

Additional characteristics should be confirmed for the actual compressor installation, including:

• Hose construction
• Internal diameter
• End fittings
• Connection type
• Pressure requirements
• Temperature requirements
• Media compatibility
• Bend requirements
• Routing limitations
• Compressor model

These characteristics should not be assumed solely from the product name or part number.

---

Compatible Compressor System Components

A typical industrial screw compressor system may include:

Component	Typical Function
Compressor Element	Compresses air
Hose Assembly	Provides flexible connection
Oil Filter	Filters compressor oil
Air Filter	Filters intake air
Air-Oil Separator	Separates oil from compressed air
Cooler	Controls operating temperature
Valves	Regulates air or fluid flow
Sensors	Monitors operating conditions
Control System	Controls compressor operation
Electrical System	Supplies and controls equipment

The exact configuration depends on the compressor model and application.

---

Related Ingersoll Rand Replacement Components

Reference / Part	Product Type	General Function
47623601001 / 24900433	Oil Filter	Compressor oil filtration
47623601001 / 47605764001	Panel Air Filter	Air filtration
47623601001 / 23708423	Air-Oil Separator	Air/oil separation
47623601001 / 88089743	Breathing Filter	Compressor system filtration
47623601001 / 24900318	Air Filter	Air filtration
47623601001 / 24266058	Hose	Flexible compressor connection
47623601001 / 24266215	Hose	Flexible compressor connection
47623601001 / 24266223	Hose	Flexible compressor connection
47623601001 / 85574374	Hose	Flexible compressor connection
47623602001 / 24266207	Hose	Flexible compressor connection

Related hoses should not be considered direct substitutes without verifying the complete part number and application requirements.

---

Storage Recommendations

Replacement hoses should be stored in a clean, dry environment suitable for flexible industrial components.

Avoid unnecessary exposure to:

• Direct sunlight
• Excessive heat
• Moisture
• Chemicals
• Sharp objects
• Mechanical compression

The hose should not be stored under permanent sharp bends or excessive mechanical loads.

Keeping the original packaging or identification label can help maintain accurate spare-parts identification.

---

Key Advantages

• Ingersoll Rand industrial compressor replacement component
• Suitable for compatible compressor-system applications
• Supplied hose length of 32 in
• Identified by part number 24266207
• Associated reference 47623602001
• Flexible connection for compressor equipment
• Useful for preventive compressor maintenance
• Suitable for compressor service and overhaul operations
• Supports spare-parts inventory management
• Supplied shipping weight of 3 kg
• Practical replacement component for industrial compressor systems

---

Technical FAQs

What is the Ingersoll Rand 24266207?

The Ingersoll Rand 24266207 is identified as a Hose associated with reference 47623602001.

What is the hose length?

The supplied hose length is 32 inches.

What is the shipping weight?

The supplied shipping weight is 3 kg. This value is intended for shipping and logistics planning and should not be treated as the net weight of the hose.

What is the purpose of a compressor hose?

A compressor hose provides a flexible connection between compatible system components and can accommodate appropriate movement and vibration.

Can the 24266207 be used on any Ingersoll Rand compressor?

No. Compatibility should be verified using the complete 47623602001 / 24266207 identification and the specific compressor configuration.

What should be checked before installation?

Verify the part number, hose length, connection arrangement, fittings, routing, pressure requirements, temperature requirements, and media compatibility.

Why is the 32 in length important?

The hose length determines how the component can be routed between connection points. Incorrect length can cause excessive tension, unnecessary loops, or interference with nearby components.

What can cause premature hose failure?

Possible causes include abrasion, excessive bending, twisting, vibration, heat exposure, incorrect routing, unsuitable operating conditions, or incorrect hose selection.

Is the 3 kg value the actual hose weight?

No. The supplied value is specifically identified as shipping weight: 3 kg.

How should this replacement hose be identified?

Verify both:

47623602001 / 24266207

and confirm the supplied 32 in hose length against the original compressor installation.

---

Conclusion

The Ingersoll Rand 47623602001 / 24266207 Hose is an industrial replacement hose associated with compatible compressor equipment. Flexible hose assemblies provide practical connections within compressor systems and can accommodate appropriate movement and vibration when correctly selected and installed.

The supplied hose length is 32 inches, making dimensional verification important during replacement. Correct routing helps prevent excessive bending, tension, twisting, abrasion, and unwanted contact with surrounding equipment. The supplied 3 kg shipping weight is intended for transportation and logistics planning and should not be interpreted as the net weight of the hose.

Proper replacement requires safe compressor shutdown, energy isolation, circuit depressurization, part-number verification, inspection of fittings and seals, correct hose routing, and controlled leak testing after installation.

For procurement and maintenance, the complete Ingersoll Rand 47623602001 / 24266207 identification should be verified before ordering or installing the component. Exact hose construction, connection configuration, pressure rating, temperature rating, and media compatibility should be confirmed for the intended compressor application to ensure the replacement is properly matched to the system.