ProductPRODUCT
Featured products
Contact Us
- Bently Nevada
- 43575-02
- Replacement Washer
- USA
- 30 × 10 × 20 mm
- 0.05 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 4
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Bently Nevada 43575-02 Replacement Washer is a mechanical replacement component used in compatible Bently Nevada machinery monitoring and protection installations. As a passive hardware item, its function is related to securing, spacing, or maintaining the mechanical relationship between mating components within the applicable equipment assembly.
Washers are commonly used in machinery instrumentation hardware where fasteners must maintain consistent contact pressure and component positioning. In proximity monitoring, vibration monitoring, and other rotating-equipment installations, small mechanical parts can affect the fit and stability of the overall assembly.
The 43575-02 is suited to maintenance situations where an existing washer is damaged, missing, deformed, or being replaced as part of a service procedure. Using the correct replacement part helps preserve the original mechanical arrangement of the associated Bently Nevada equipment.
During maintenance, the washer should be evaluated together with the corresponding fastener, mounting hardware, and installed assembly. The replacement should match the original part number and mechanical application rather than being selected solely by appearance or general washer dimensions.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model | 43575-02 |
| Product Family | Bently Nevada Machinery Monitoring Components |
| Product Type | Replacement Washer |
| Primary Function | Mechanical fastening, spacing, or assembly support |
| System Role | Mechanical installation hardware |
| Typical Application | Bently Nevada machinery monitoring installations |
| Dimensions | 30 × 10 × 20 mm |
| Weight | 0.05 kg |
Product Features
- Replacement washer for compatible Bently Nevada equipment assemblies.
- Passive mechanical component with no signal-processing or control function.
- Supports the mechanical installation of associated hardware.
- Can be used during maintenance or refurbishment of compatible monitoring equipment.
- Helps maintain the intended fastening and component-positioning arrangement.
- Suitable for replacement of worn, damaged, or missing installation hardware.
- Requires verification of the corresponding assembly and part number before use.
Working Principle
The 43575-02 operates as a passive mechanical element within the applicable equipment assembly. Once installed with the corresponding fastener and mating hardware, it distributes mechanical contact or maintains the required spacing between components according to the original assembly arrangement.
Fastener → 43575-02 Replacement Washer → Mounting Component → Bently Nevada Equipment Assembly
The washer does not measure vibration, process electrical signals, or execute machinery protection logic. Its contribution is mechanical: maintaining the fastening arrangement so that connected components remain correctly positioned and secured.
An incorrect washer, missing washer, or damaged washer can affect the mechanical fit of the assembly. In instrumentation installations, such a condition may contribute to looseness, movement, or changes in the physical relationship between monitoring hardware and the machine.
Role in a Bently Nevada Machinery Monitoring Installation
The 43575-02 belongs to the mechanical hardware layer of a Bently Nevada installation. It supports the mounting arrangement of associated equipment while the active monitoring functions are handled by sensors, signal-conditioning electronics, monitoring modules, and protection systems.
Machine / Mounting Structure → Mechanical Hardware → 43575-02 Washer → Monitoring Hardware → Signal Conditioning → Monitoring / Protection System
| System Element | Function |
|---|---|
| Machine / Mounting Point | Provides the mechanical installation location |
| Fastener Assembly | Secures the associated hardware |
| 43575-02 | Supports the mechanical fastening arrangement |
| Monitoring Hardware | Holds or positions the applicable monitoring component |
| Proximity / Vibration Sensor | Detects machinery condition information |
| Monitoring System | Evaluates measurement signals |
| Protection System | Provides configured alarm or protective action |
The washer should therefore be considered part of the physical installation rather than part of the electronic measurement chain.
Industrial Applications
| Application | Typical Use |
|---|---|
| Machinery Monitoring Equipment | Replacement of installation hardware |
| Vibration Monitoring Systems | Maintaining sensor or hardware mounting |
| Proximity Monitoring Installations | Supporting associated mechanical assemblies |
| Turbine Monitoring | Maintenance of monitoring-system mounting parts |
| Compressor Monitoring | Replacement of compatible fastening hardware |
| Generator Monitoring | Service of installed monitoring equipment |
| Industrial Rotating Machinery | Mechanical hardware replacement |
| Maintenance and Refurbishment | Restoration of original assembly hardware |
Installation and Maintenance
- Verify the complete 43575-02 part number before beginning replacement work.
- Confirm that the washer corresponds to the intended Bently Nevada equipment assembly.
- Isolate the applicable machinery or equipment according to the site’s maintenance procedure.
- Inspect the existing fastening arrangement before removing the original washer.
- Check the mating fastener and mounting surface for damage, contamination, or abnormal wear.
- Remove the existing washer without damaging adjacent components or mounting hardware.
- Compare the replacement part with the original assembly arrangement before installation.
- Install the washer in the same mechanical position specified by the applicable equipment assembly.
- Ensure that the associated fastener and mating components are correctly aligned.
- Tighten the assembly according to the applicable equipment maintenance procedure rather than using an assumed torque value.
- Inspect the completed assembly for looseness, incorrect positioning, or interference with nearby monitoring components.
- After maintenance, verify the mechanical condition of the associated monitoring installation before returning the equipment to normal operation.
Compatible System Components
| Component | Function |
|---|---|
| Bently Nevada Mounting Hardware | Secures monitoring-system components |
| Fasteners | Provides mechanical attachment |
| Proximity Probe Assemblies | Detects shaft position or movement |
| Vibration Sensors | Detects machinery vibration |
| Probe Housing Assemblies | Positions proximity monitoring probes |
| Sensor Mounting Structures | Provides the physical installation interface |
| Machinery Monitoring Modules | Processes monitoring signals |
| Machinery Protection System | Provides configured alarm and protection functions |
Recommended Related Models
| Model / Product Family | Product Type | Typical Application |
|---|---|---|
| Bently Nevada 43575-02 | Replacement Washer | Monitoring-system mechanical maintenance |
| Bently Nevada 37439-01 | Accelerometer Mounting Base | Vibration sensor mounting |
| Bently Nevada 24701 Series | Proximity Probe Housing Assembly | Proximity probe installation |
| Bently Nevada 7200 Series | Proximity Monitoring Components | Shaft monitoring |
| Bently Nevada 3300 XL Series | Proximity Monitoring System | Continuous machinery monitoring |
| Bently Nevada 3500 Series | Machinery Protection System | Critical machinery protection |
| Bently Nevada Monitoring Accessories | Mechanical Accessories | Monitoring-system installation |
| Bently Nevada Sensor Mounting Hardware | Mounting Components | Sensor installation and maintenance |
Key Advantages
- Provides a direct replacement for the specified mechanical washer.
- Supports the intended fastening arrangement of compatible Bently Nevada equipment.
- Helps maintain correct mechanical positioning of associated hardware.
- Suitable for maintenance, repair, and refurbishment work.
- Passive construction simplifies its role within the overall equipment assembly.
- Helps restore the original mechanical installation when the corresponding washer is damaged or missing.
Technical FAQs
Why should the 43575-02 be replaced with the specified part rather than a visually similar washer?
A visually similar washer may have different mechanical characteristics or may not fit the original assembly correctly. The 43575-02 part number should therefore be matched to the equipment documentation or existing installation before substitution.
Can a missing washer affect machinery monitoring performance?
Potentially. Although the washer does not process measurement signals, its absence can change the mechanical fastening or positioning of the associated hardware. In a vibration or proximity installation, unwanted movement can affect the physical measurement arrangement.
Should the fastener be replaced together with the 43575-02?
Not necessarily. The associated fastener should first be inspected for wear, damage, corrosion, or deformation. If the fastener remains suitable, the washer can be replaced according to the applicable maintenance procedure; otherwise, the complete fastening arrangement should be serviced.
Does the 43575-02 have any electrical or monitoring function?
No. It is a passive mechanical replacement component. It does not measure vibration, transmit signals, process data, or generate alarm or protection commands; those functions belong to the associated active monitoring equipment.