Product Overview

The Ingersoll Rand 47553880001 23467244 Solenoid Service Kit is a maintenance kit used for servicing the solenoid valve assembly in compatible Ingersoll Rand compressor equipment.

Solenoid valves are commonly used to control pneumatic or process-air functions within a compressor. An electrical command energizes the solenoid, causing the valve mechanism to change position and control the associated air or fluid path. Problems such as sticking, contamination, seal deterioration, or internal wear can affect this operation and lead to abnormal compressor behavior.

The 23467244 identifies the solenoid service kit, while 47553880001 is the associated service reference. The kit is intended for maintenance work where the applicable solenoid assembly requires service rather than complete replacement of the compressor system.

Typical maintenance situations include solenoid valve overhaul, corrective repair, scheduled compressor servicing, and replacement of serviceable internal components.

Technical Specifications

Product Features

• Ingersoll Rand Solenoid Service Kit
• Part number 23467244
• Service reference 47553880001
• Intended for compatible compressor solenoid assemblies
• Supports solenoid valve maintenance
• Suitable for component-level servicing
• Useful for corrective maintenance
• Applicable to scheduled compressor overhaul
• Helps restore the operating condition of a serviced solenoid assembly
• Suitable for maintenance inventory

Working Principle

A solenoid valve converts an electrical command into mechanical valve movement.

A typical control sequence is:

Electrical Command → Solenoid Coil → Plunger Movement → Valve Position Change → Air / Fluid Flow

When the coil receives the appropriate electrical signal, its magnetic field moves the internal actuator. The resulting movement changes the valve’s internal flow path.

In a compressor, this action can be associated with functions such as control-air switching, unloading, venting, pressure-related control, or other pneumatic operations depending on the installed assembly.

A malfunctioning solenoid can produce symptoms such as:

• Failure to actuate
• Delayed valve response
• Continuous energization
• Incorrect pneumatic state
• Unloading problems
• Abnormal compressor sequencing
• Intermittent control behavior

The 23467244 service kit supports maintenance of the applicable solenoid assembly so that the valve can return to its intended mechanical operating condition.

Role in Compressor Control

The solenoid assembly normally sits between an electrical control signal and a pneumatic or mechanical function.

The specific function of the solenoid depends on the compressor configuration and the circuit in which the valve is installed.

Industrial Applications

Installation and Maintenance

Solenoid service work requires attention to both the electrical and pneumatic sides of the assembly.

• Confirm the 47553880001 / 23467244 identification.
• Isolate the compressor before servicing.
• Remove electrical power from the applicable circuit.
• Depressurize the relevant pneumatic section.
• Disconnect the solenoid assembly according to the maintenance procedure.
• Inspect the coil and valve body.
• Check internal components for contamination or mechanical damage.
• Replace service components included in the applicable kit.
• Clean the valve assembly as required.
• Inspect seals and moving components.
• Reassemble the solenoid correctly.
• Restore the electrical connection.
• Restore pneumatic pressure gradually.
• Check valve actuation.
• Verify the associated compressor function.
• Monitor the assembly for leakage or abnormal operation.
• Record the completed maintenance work.

A solenoid that does not operate correctly should be evaluated through the complete control path. Electrical command, coil condition, valve mechanics, pneumatic pressure, and downstream equipment can all affect the final response.

Compatible System Components

Recommended Related Models

Key Advantages

• Ingersoll Rand Solenoid Service Kit.
• Part number 23467244.
• Associated service reference 47553880001.
• Intended for compatible compressor solenoid assemblies.
• Suitable for valve maintenance and overhaul.
• Supports component-level repair.
• Useful for scheduled and corrective maintenance.
• Suitable for compressor service-parts inventory.

Technical FAQs

What does the 23467244 Solenoid Service Kit service?

The kit is intended for servicing the applicable solenoid assembly used in compatible Ingersoll Rand compressor equipment. It supports maintenance of the valve mechanism rather than replacing the complete compressor control system.

What compressor symptoms can be associated with a faulty solenoid valve?

Depending on the circuit, symptoms may include failure to unload, incorrect pneumatic switching, delayed actuation, abnormal sequencing, or a compressor function that remains in the wrong operating state.

Should pneumatic pressure be released before servicing the solenoid assembly?

Yes. The relevant pneumatic section should be isolated and depressurized before mechanical service. This prevents stored pressure from affecting disassembly and reduces the risk of uncontrolled valve movement or air release.

How can a solenoid problem be distinguished from an electrical control problem?

Check the control signal and coil operation first, then examine the valve mechanism and pneumatic response. A correct electrical command with no corresponding mechanical or pneumatic action points toward the solenoid assembly or its associated air circuit.