ProductPRODUCT
Featured products
Contact Us
- Schneider
- ATS480D62Y
- Soft Starter
- France
- 290 × 190 × 247 mm
- 8.3 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 7
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Schneider ATS480D62Y Soft Starter is an industrial motor-control device designed for controlled acceleration and deceleration of three-phase AC induction motors. It is intended for applications where direct-on-line motor starting can produce high inrush current, sudden torque, mechanical shock, or undesirable disturbances in the electrical distribution system.
A soft starter provides a controlled transition between motor standstill and normal operating speed. Instead of subjecting the motor and mechanical load to an abrupt full-voltage start, the ATS480D62Y manages the starting process progressively. This can help reduce stress on motors, shafts, couplings, gearboxes, belts, pumps, fans, and other driven machinery.
The ATS480D62Y can be incorporated into industrial control panels and automated motor-control systems. It can receive start and stop commands from conventional control circuits or an automation system while providing controlled motor operation and fault supervision.
The supplied physical specifications for this model are 290 × 190 × 247 mm with a weight of 8.3 kg.
Product Identification
| Parameter | Specification |
|---|---|
| Manufacturer | Schneider Electric |
| Model | ATS480D62Y |
| Product Family | ATS480 |
| Product Type | Soft Starter |
| Application | Industrial Motor Control |
| Motor Type | Three-Phase AC Induction Motor |
| Main Function | Controlled Motor Starting and Stopping |
| Starting Method | Soft Start |
| Stopping Method | Controlled Stop |
| Dimensions | 290 × 190 × 247 mm |
| Weight | 8.3 kg |
| Installation | Industrial Control Cabinet |
| Typical Applications | Pumps, Fans, Compressors, Conveyors, Mixers |
The dimensions and weight above are based on the product information supplied for this article. Actual electrical ratings, motor compatibility, protection requirements, and application limitations should be confirmed during system engineering.
Technical Specifications
| Technical Item | Specification |
|---|---|
| Manufacturer | Schneider Electric |
| Model | ATS480D62Y |
| Series | Altivar ATS480 |
| Product Type | Soft Starter |
| Motor Application | Three-Phase AC Motor |
| Starting Control | Controlled Acceleration |
| Stopping Control | Controlled Deceleration |
| Installation | Panel / Control Cabinet |
| Dimensions | 290 × 190 × 247 mm |
| Weight | 8.3 kg |
| Typical Load Types | Pumps, Fans, Compressors, Conveyors, Mixers |
| Industrial Function | Motor Starting and Stopping Control |
The motor’s rated current, operating duty, load inertia, starting frequency, ambient conditions, and installation method should be considered when determining the suitability of the ATS480D62Y for a particular machine.
Functional Principle
A typical installation can be represented as:
Three-Phase AC Supply
↓
ATS480D62Y Soft Starter
↓
Three-Phase AC Motor
↓
Mechanical Transmission
↓
Industrial Load
The soft starter manages the motor during acceleration so that the transition from zero speed to operating speed is more controlled.
This can provide several practical benefits:
- Reduced starting-current impact
- Reduced mechanical shock
- Smoother acceleration
- Lower stress on couplings
- Reduced belt and chain tension changes
- Reduced gearbox shock
- Improved process stability
Controlled stopping can also be used where the application requires gradual deceleration.
Why Use the ATS480D62Y?
Controlled Acceleration
A controlled starting profile can allow the motor to accelerate progressively rather than experiencing an abrupt transition.
Mechanical Stress Reduction
The starting process can place less sudden stress on:
- Shafts
- Bearings
- Couplings
- Gearboxes
- Belts
- Chains
- Pumps
- Fans
Electrical System Benefits
Reducing the severity of the starting event can help limit disturbances associated with large motor inrush current.
Process Stability
Controlled motor acceleration and stopping can be especially useful for rotating machinery with high inertia or fluid-related loads.
Industrial Applications
Pumping Equipment
The ATS480D62Y can be applied to industrial pump systems where controlled acceleration and stopping are desirable.
Examples include:
- Water pumps
- Process pumps
- Cooling pumps
- Circulation pumps
- Wastewater equipment
A controlled starting profile can help reduce sudden mechanical and process disturbances.
Fans and Blowers
Fans with large rotating assemblies can require significant acceleration energy.
Applications include:
- Factory ventilation
- Industrial exhaust
- Cooling systems
- Air-handling equipment
- Dust collection
Compressors
Controlled starting can be useful for compressor motor applications where high starting torque and electrical demand need to be managed.
The actual setup should be determined from the compressor characteristics and motor operating conditions.
Conveyors
Conveyors can benefit from smooth motor acceleration because sudden torque can result in:
- Belt shock
- Material movement
- Coupling stress
- Gearbox loading
- Mechanical vibration
Mixers and Process Machinery
Mixers can have high starting resistance depending on the material being processed. A controlled acceleration profile can reduce sudden loading of the drive system.
Installation Guide
1. Verify Product Identity
Before installation, confirm:
Schneider ATS480D62Y
Inspect the unit for:
- Cracked housing
- Damaged terminals
- Loose hardware
- Shipping damage
- Moisture
- Foreign material
Do not install a damaged unit until its condition has been evaluated.
2. Verify Motor Information
Obtain the motor nameplate data before configuring the soft starter.
Important information includes:
- Rated voltage
- Rated current
- Rated frequency
- Rated power
- Connection arrangement
- Motor speed
- Duty
- Application load
Motor rated current should be carefully matched with the soft starter configuration.
3. Cabinet Planning
The supplied dimensions are:
290 × 190 × 247 mm
These dimensions should be treated as the physical footprint of the device, not the complete cabinet-space requirement.
Allow additional space for:
- Power cables
- Control wiring
- Protection devices
- Ventilation
- Cable bending radius
- Inspection
- Maintenance
The cabinet layout should also prevent excessive heat accumulation around the soft starter.
4. Environmental Preparation
Install the ATS480D62Y in a suitable industrial environment.
Avoid:
- Water exposure
- Condensation
- Excessive dust
- Oil mist
- Corrosive gases
- High ambient temperature
- Excessive vibration
- Direct heat sources
A suitable enclosure should provide the required environmental protection.
5. Electrical Safety
Before wiring:
- Disconnect all electrical power.
- Apply lockout/tagout procedures.
- Verify absence of hazardous voltage.
- Isolate the motor.
- Confirm stored electrical energy has been safely discharged.
- Use suitable electrical PPE.
Only qualified personnel should perform electrical installation and commissioning.
6. Mechanical Mounting
Secure the ATS480D62Y to a suitable control-panel structure.
Verify:
- Correct orientation
- Mounting stability
- Adequate ventilation
- Cable access
- Terminal accessibility
- Maintenance clearance
The supplied weight is 8.3 kg, so the panel and mounting hardware must be capable of supporting the equipment under normal operating vibration.
7. Power Wiring
Connect the incoming three-phase supply and motor circuit according to the engineered electrical design.
Inspect:
- Phase connections
- Cable sizing
- Terminal tightness
- Protective grounding
- Insulation
- Short-circuit protection
- Motor connections
Before energizing, perform a complete visual inspection of the power circuit.
8. Control Wiring
The control circuit may include:
- Start
- Stop
- Reset
- Run indication
- Fault indication
- External interlocks
- PLC commands
- Emergency-stop logic
Control wiring should be routed appropriately to minimize interference from power conductors.
9. Parameter Configuration
Configure the ATS480D62Y according to the actual motor and driven load.
Typical configuration areas include:
- Motor rated current
- Starting characteristics
- Acceleration time
- Deceleration time
- Current limitation
- Motor protection
- Stop mode
- Control source
Avoid copying settings from unrelated motor applications.
10. Mechanical Inspection
Before commissioning, inspect the driven machine.
Check:
- Shaft alignment
- Couplings
- Bearings
- Gearboxes
- Belts
- Pumps
- Fans
- Conveyors
- Mechanical guards
Ensure the load can move without abnormal resistance.
Commissioning Procedure
Initial Inspection
Before energization:
- Verify power wiring.
- Verify control wiring.
- Check grounding.
- Inspect circuit protection.
- Confirm motor data.
- Inspect mechanical equipment.
- Verify cabinet ventilation.
Initial Power-Up
- Energize the system.
- Observe the ATS480D62Y status.
- Check for fault indications.
- Verify control inputs.
- Confirm the expected operating mode.
First Motor Start
- Issue the start command.
- Observe acceleration.
- Monitor motor current.
- Listen for unusual sounds.
- Check mechanical vibration.
- Verify normal operating speed.
If abnormal conditions are observed, stop the commissioning process and investigate before restarting.
Troubleshooting Guide
Fault 1 – Soft Starter Does Not Power Up
Possible Causes
- Missing incoming power
- Open circuit protection
- Incorrect power wiring
- Control supply problem
- Internal fault
Diagnostic Steps
- Check incoming voltage.
- Inspect protective devices.
- Check power terminals.
- Verify control supply.
- Review the soft starter status.
Fault 2 – Motor Does Not Start
Possible Causes
- No start command
- Incorrect control wiring
- Active interlock
- Incorrect configuration
- Motor fault
- Mechanical obstruction
Recommended Checks
Trace the start command from the PLC, HMI, relay, or control circuit to the ATS480D62Y.
Then check the motor circuit and driven equipment.
Fault 3 – Motor Accelerates Too Slowly
Possible Causes
- Acceleration time too long
- Incorrect starting parameters
- Current limitation too restrictive
- Excessive mechanical load
- Mechanical resistance
Corrective Action
Check the motor parameters and starting configuration while inspecting the mechanical system for abnormal loading.
Fault 4 – Excessive Starting Current
Possible Causes
- Incorrect current limitation
- Acceleration time too short
- Heavy mechanical load
- Incorrect motor parameters
- Motor condition
Corrective Action
Verify the motor nameplate data and compare it with the configured values.
Fault 5 – Soft Starter Trips During Startup
Possible Causes
- Motor overload
- Phase problem
- Wiring error
- Incorrect parameters
- Excessive mechanical load
- Mechanical obstruction
Do not repeatedly reset the device without identifying the cause.
Fault 6 – ATS480D62Y Overheats
Possible Causes
- Poor cabinet ventilation
- Blocked airflow
- High ambient temperature
- Excessive starting frequency
- Motor overload
- Cooling-system problem
- Dust accumulation
Diagnostic Approach
Check the complete thermal environment of the cabinet. Heat generated by nearby equipment can also affect the soft starter.
Fault 7 – Motor Vibrates During Startup
Possible Causes
- Shaft misalignment
- Loose coupling
- Bearing deterioration
- Mechanical imbalance
- Incorrect acceleration profile
- Mechanical resonance
Inspect both electrical settings and mechanical components.
Fault 8 – Motor Stops Too Abruptly
Possible Causes
- Incorrect deceleration settings
- External stop command
- Control logic problem
- Incorrect stop mode
- High-inertia load
Review the complete stopping sequence.
Fault 9 – Motor Does Not Stop
Possible Causes
- Stop command missing
- Control wiring problem
- PLC logic issue
- External interlock
- Configuration problem
Trace the stop-command path from the control system to the soft starter.
Fault 10 – Repeated Overload Trips
Possible Causes
- Excessive mechanical load
- Mechanical obstruction
- Bearing problems
- Incorrect motor parameters
- Excessive starting frequency
- Incorrect soft-starter settings
- Abnormal process conditions
Repeated overload trips should be treated as a root-cause problem rather than simply resetting the device.
Fault Diagnosis Flow
A practical troubleshooting sequence is:
Incoming Power
↓
Circuit Protection
↓
ATS480D62Y Status
↓
Control Signals
↓
Power Wiring
↓
Motor
↓
Mechanical Load
↓
Configuration
↓
Controlled Restart
This approach allows technicians to distinguish between electrical, control, configuration, motor, and mechanical problems.
Preventive Maintenance
Electrical Maintenance
Inspect:
- Power terminals
- Control terminals
- Grounding connections
- Cable insulation
- Signs of overheating
- Loose connections
Cooling Maintenance
Check:
- Cabinet airflow
- Ventilation openings
- Cooling system
- Filters
- Dust accumulation
Keep ventilation paths unobstructed.
Mechanical Maintenance
Inspect:
- Mounting hardware
- Cable supports
- Shaft alignment
- Couplings
- Bearings
- Vibration
Operational Monitoring
Monitor:
- Motor current
- Starting time
- Operating temperature
- Fault history
- Starting frequency
- Mechanical vibration
- Abnormal noise
Historical operating data can help identify gradual changes in system performance.
Preventive Maintenance Table
| Maintenance Item | Recommended Action |
|---|---|
| Power Terminals | Inspect for looseness and heating |
| Control Wiring | Verify connection integrity |
| Grounding | Check continuity |
| Cooling System | Inspect and clean |
| Ventilation | Keep airflow unobstructed |
| Cabinet Filters | Clean or replace when required |
| Motor Current | Monitor operating values |
| Fault History | Review regularly |
| Mounting Hardware | Inspect periodically |
| Cable Insulation | Check for deterioration |
| Cabinet Interior | Remove dust and contamination |
| Mechanical Equipment | Check alignment and vibration |
Common Installation Errors
Incorrect Motor Parameters
Incorrect motor information can result in unstable starting and unnecessary protection trips.
Poor Cabinet Ventilation
Restricted airflow can cause excessive operating temperatures.
Loose Electrical Terminals
Loose connections may result in heating, voltage drop, intermittent faults, and equipment damage.
Incorrect Control Wiring
A faulty start or stop circuit can make the soft starter appear defective when the actual problem is in the control system.
Poor Grounding
Protective grounding must be properly implemented as part of the complete electrical installation.
Mechanical Overloading
A motor may fail to accelerate even when the soft starter is operating correctly if the driven machine is mechanically overloaded.
Repeated Fault Resetting
Repeated resets without diagnosis can increase downtime and conceal the underlying problem.
Industrial Automation Integration
The ATS480D62Y can be incorporated into a wider industrial automation system.
A typical architecture is:
PLC / DCS / HMI
↓
Start / Stop / Interlock Commands
↓
ATS480D62Y
↓
Three-Phase Motor
↓
Pump / Fan / Compressor / Conveyor
↓
Process Feedback
The soft starter handles the controlled motor-starting process while the automation system coordinates motor operation with the overall production sequence.
Supporting Components
A complete motor-control installation may include:
- Circuit breakers
- Disconnect switches
- Fuses
- Contactors
- Motor protection equipment
- PLC controllers
- HMI systems
- Control relays
- Communication equipment
- Emergency-stop circuits
- Current monitoring equipment
- Motor sensors
- Process feedback devices
The exact architecture should be determined according to the motor, driven load, electrical system, automation strategy, and applicable safety requirements.
Key Advantages
- Industrial motor soft-starting solution
- Controlled acceleration
- Controlled deceleration
- Reduced starting-current impact
- Reduced mechanical shock
- Improved motor-starting stability
- Reduced stress on mechanical drivetrain components
- Suitable for pumps and other rotating machinery
- Suitable for industrial automation integration
- Dimensions: 290 × 190 × 247 mm
- Weight: 8.3 kg
Technical FAQs
What is the Schneider ATS480D62Y?
The ATS480D62Y is an industrial soft starter designed to provide controlled starting and stopping for three-phase AC induction motors.
What are the dimensions of the ATS480D62Y?
The supplied dimensions are 290 × 190 × 247 mm.
What is the weight of the ATS480D62Y?
The supplied weight is 8.3 kg.
What does a soft starter do?
A soft starter controls the motor’s acceleration and stopping process to reduce the impact of high starting current and sudden mechanical torque.
What applications are suitable for the ATS480D62Y?
Typical applications include pumps, fans, compressors, conveyors, mixers, blowers, and other industrial rotating equipment.
Why does a motor fail to reach full speed?
Possible causes include excessive mechanical load, unsuitable acceleration parameters, restrictive current settings, incorrect motor data, or mechanical resistance.
Why does the ATS480D62Y overheat?
Possible causes include inadequate ventilation, blocked airflow, high ambient temperature, excessive starting frequency, overload, or contamination.
Why does the soft starter trip during startup?
Possible causes include overload, phase problems, incorrect configuration, wiring errors, excessive mechanical load, or mechanical obstruction.
What should be checked before commissioning?
Check the motor nameplate data, power wiring, control wiring, grounding, protection, cabinet ventilation, mechanical load, and soft-starter configuration.
How can the ATS480D62Y be maintained?
Regular inspection of electrical terminals, cooling conditions, motor current, fault history, mounting hardware, and mechanical equipment can help maintain reliable operation.
Conclusion
The Schneider ATS480D62Y Soft Starter is designed to provide controlled motor acceleration and stopping in industrial applications. By managing the starting process, it can help reduce electrical inrush and mechanical shock while improving the operating behavior of pumps, fans, compressors, conveyors, mixers, and other motor-driven equipment.
The supplied physical specifications are 290 × 190 × 247 mm, with a weight of 8.3 kg. When installing the device, the control cabinet should provide additional room for power connections, control wiring, ventilation, protective components, and maintenance.
Reliable operation depends on correct motor selection, appropriate parameter configuration, proper power and control wiring, adequate grounding, suitable ventilation, and correct mechanical installation.
When troubleshooting an ATS480D62Y system, technicians should follow a structured process beginning with the incoming power and protection system, then checking control signals, soft-starter status, motor wiring, motor condition, and mechanical load. This approach helps avoid unnecessary replacement of functional equipment.
Regular preventive maintenance, including terminal inspection, cooling-system checks, motor-current monitoring, fault-history review, and mechanical inspection, can reduce unexpected downtime and support stable long-term operation of the ATS480D62Y in industrial motor-control systems.