ProductPRODUCT
Featured products
Contact Us
- Siemens
- 6AG1134-4GD00-2AB0
- Analog Input Module
- Germany
- 15 × 81 × 52 mm
- 0.04 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 8
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The Siemens 6AG1134-4GD00-2AB0 Analog Input Module is a SIPLUS ET 200S analog electronic module designed for distributed industrial automation systems operating in demanding environments. Based on the ET 200S platform, this module features conformal coating for improved resistance to humidity, dust, and corrosive atmospheres, making it suitable for harsh industrial applications. It provides four analog current input channels (4–20 mA) for two-wire transmitters with 13-bit resolution and is intended for accurate process signal acquisition.
The module converts analog current signals from field instruments into digital values that are processed by the PLC CPU for monitoring, control, alarming, and data acquisition.
The supplied product information identifies the Siemens 6AG1134-4GD00-2AB0 as an Analog Input Module, with dimensions of 15 × 81 × 52 mm and a weight of 0.04 kg.
Product Information
- Manufacturer: Siemens
- Model: 6AG1134-4GD00-2AB0
- Product Type: Analog Input Module
- Dimensions: 15 × 81 × 52 mm
- Weight: 0.04 kg
- Analog Channels: 4 Current Inputs
- Signal Type: 4–20 mA (2-wire transmitters)
- Resolution: 13-bit
- Application: SIPLUS ET 200S Distributed I/O Systems
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Siemens |
| Model Number | 6AG1134-4GD00-2AB0 |
| Product Type | Analog Input Module |
| Dimensions | 15 × 81 × 52 mm |
| Weight | 0.04 kg |
| Number of Inputs | 4 Analog Current Inputs |
| Input Type | 4–20 mA |
| Resolution | 13-bit |
| Installation | ET 200S Distributed I/O |
| Primary Function | Analog Signal Acquisition |
Function and Working Principle
The Siemens 6AG1134-4GD00-2AB0 continuously samples analog current signals generated by industrial transmitters and converts them into digital values for PLC processing.
Typical signal flow:
Pressure / Temperature / Flow Transmitter
↓
4–20 mA Current Signal
↓
6AG1134-4GD00-2AB0
↓
ET 200S Backplane
↓
PLC CPU
↓
Control Program
↓
Industrial Process
Typical connected devices include:
- Pressure transmitters
- Temperature transmitters
- Flow transmitters
- Level transmitters
- Industrial analyzers
- Position transmitters
- Process instrumentation
Features and Advantages
- Four independent analog input channels
- Supports 4–20 mA two-wire transmitters
- 13-bit analog conversion
- Compact 15 mm module width
- Conformal coating for harsh environments
- Excellent resistance to humidity and contamination
- Reliable industrial performance
- Easy integration into ET 200S systems
- Low maintenance requirements
- Stable long-term operation
Industrial Applications
Process Automation
Collects analog process variables for continuous production control.
Chemical Industry
Monitors pressure, temperature, and flow transmitters.
Water and Wastewater Treatment
Receives measurement data from pumps, tanks, and pipelines.
Oil and Gas
Acquires process values from field instrumentation in production and transportation facilities.
Power Generation
Supports monitoring of auxiliary process systems.
Food and Beverage
Provides reliable analog data acquisition for automated production lines.
Manufacturing
Integrates with PLC systems for machine monitoring and process control.
Installation Guide
Step 1 – Verify the Module
Confirm the complete identification:
- Siemens
- 6AG1134-4GD00-2AB0
- Analog Input Module
Always verify the model number before installation.
Step 2 – Inspect the Module
Check for:
- Housing damage
- Connector damage
- Bent contacts
- Cracks
- Moisture
- Dust contamination
- Shipping damage
Replace damaged equipment before installation.
Step 3 – Prepare the Installation Environment
Verify:
- Clean control cabinet
- Proper ventilation
- Stable mounting
- Reliable grounding
- Adequate maintenance access
Step 4 – Install the Module
Module dimensions:
15 × 81 × 52 mm
Weight:
0.04 kg
Install the module securely on the ET 200S station according to the system design.
Step 5 – Connect Field Wiring
Verify:
- Correct transmitter wiring
- Proper terminal assignments
- Shielded analog cables where required
- Reliable grounding
- Secure electrical connections
Keep analog signal cables separated from high-voltage power cables.
Step 6 – Configure the PLC
Verify:
- Hardware configuration
- Module address
- Channel configuration
- Signal range
- Measurement scaling
- Diagnostic settings
Ensure configuration matches the connected field devices.
Step 7 – Power Up
Before applying power verify:
- Wiring integrity
- Ground continuity
- Module installation
- PLC configuration
Confirm the module initializes without diagnostic alarms.
Commissioning Procedure
- Verify module installation.
- Inspect wiring.
- Apply system power.
- Check module status indicators.
- Confirm PLC recognition.
- Verify analog input values.
- Compare readings with calibrated instruments.
- Test under operating conditions.
- Record commissioning data.
Troubleshooting Guide
Problem 1 – Module Not Detected
Possible causes:
- Incorrect installation
- Poor connector contact
- PLC configuration error
- Power supply issue
- Hardware failure
Recommended actions:
- Reseat the module.
- Verify PLC hardware configuration.
- Inspect connectors.
- Check system power.
- Replace the module if required.
Problem 2 – No Analog Input Signal
Possible causes:
- Sensor failure
- Wiring fault
- Incorrect terminal assignment
- Cable damage
- Configuration error
Verify the complete signal path from the transmitter to the PLC.
Problem 3 – Unstable Analog Readings
Possible causes:
- Electrical interference
- Poor grounding
- Loose wiring
- Sensor malfunction
- Improper cable routing
Inspect shielding and grounding practices.
Problem 4 – Incorrect Measurement Values
Possible causes:
- Wrong channel configuration
- Incorrect scaling
- Sensor calibration error
- Wiring mistakes
- Faulty transmitter
Compare PLC values with calibrated measuring equipment.
Problem 5 – Diagnostic Alarm
Possible causes:
- Hardware fault
- Configuration mismatch
- Communication issue
- Internal electronics failure
Review PLC diagnostics before replacing the module.
Problem 6 – Intermittent Signal
Possible causes:
- Loose connector
- Damaged cable
- Cabinet vibration
- Power fluctuations
Inspect all wiring and terminals.
Problem 7 – Electrical Noise
Possible causes:
- Poor grounding
- Improper cable routing
- Nearby high-power equipment
- Shield termination problems
Separate analog wiring from power circuits.
Problem 8 – Channel Failure
Possible causes:
- Internal electronics fault
- Wiring damage
- Incorrect field connection
- Channel overload
Test each channel independently.
Problem 9 – Module Overheating
Possible causes:
- Poor cabinet ventilation
- High ambient temperature
- Heat accumulation
- Environmental contamination
Maintain adequate airflow inside the control cabinet.
Problem 10 – Communication Error
Possible causes:
- ET 200S communication fault
- PLC configuration mismatch
- Connector problems
- Module failure
Verify communication between the PLC CPU and the distributed I/O station.
Fault Diagnosis Flow
Recommended troubleshooting sequence:
Power Supply
↓
PLC Hardware Configuration
↓
Module Status
↓
Field Wiring
↓
Transmitter
↓
Signal Verification
↓
System Operation
Following this sequence helps isolate electrical, configuration, and instrumentation faults efficiently.
Module Replacement Procedure
Preparation
- Save PLC configuration.
- Record wiring connections.
- Label field cables.
- Isolate electrical power.
Removal
- Disconnect power.
- Remove field wiring.
- Remove the module.
- Inspect connectors.
Installation
- Verify replacement model.
- Install the replacement module.
- Reconnect wiring.
- Verify terminal security.
Commissioning
- Restore power.
- Confirm PLC recognition.
- Verify analog input signals.
- Test operation.
- Record maintenance results.
Preventive Maintenance
| Maintenance Item | Recommended Action |
|---|---|
| Module Housing | Inspect regularly |
| Connectors | Verify secure installation |
| Wiring | Inspect periodically |
| Grounding | Check continuity |
| PLC Diagnostics | Review fault history |
| Cabinet | Keep clean and dry |
| Ventilation | Maintain airflow |
| Signal Quality | Verify regularly |
| Mounting | Check mechanical security |
| Maintenance Records | Update after service |
Environmental Considerations
Temperature
Maintain appropriate cabinet temperatures for reliable operation.
Dust
Clean accumulated dust during scheduled maintenance.
Moisture
Prevent condensation and water ingress.
Vibration
Inspect module mounting and connectors periodically.
Electromagnetic Interference
Use shielded analog cables and proper grounding techniques.
Common Installation Mistakes
- Installing the wrong module
- Incorrect channel configuration
- Improper transmitter wiring
- Poor grounding
- Loose electrical terminals
- Mixing analog and power cables
- Ignoring PLC diagnostic messages
- Skipping commissioning verification
- Poor cabinet ventilation
- Failure to document configuration changes
Key Advantages
- Four analog current input channels
- Supports 4–20 mA two-wire transmitters
- 13-bit measurement resolution
- Compact dimensions of 15 × 81 × 52 mm
- Lightweight construction (0.04 kg)
- Conformal coating for harsh environments
- Reliable ET 200S integration
- Stable industrial performance
- Low maintenance requirements
- Long operational life
Technical FAQs
What is the Siemens 6AG1134-4GD00-2AB0?
It is a SIPLUS ET 200S analog input module providing four 4–20 mA current input channels for two-wire transmitters with conformal coating for harsh industrial environments.
What is its primary function?
The module converts analog current signals from field transmitters into digital data for PLC processing.
How many analog channels does it provide?
It provides 4 analog current input channels.
What signal type does it support?
It supports 4–20 mA current inputs from two-wire transmitters.
What are its dimensions?
The module measures 15 × 81 × 52 mm.
What is its weight?
The supplied weight is 0.04 kg.
Why is the PLC not detecting the module?
Possible causes include installation errors, configuration problems, connector faults, power supply issues, or hardware failure.
Why are analog values unstable?
Electrical interference, grounding problems, loose wiring, sensor faults, or incorrect cable routing are common causes.
Where is this module commonly used?
It is widely used in process automation, chemical plants, water treatment, oil and gas, manufacturing, food processing, and power generation.
How should the module be maintained?
Inspect connectors, wiring, grounding, cabinet ventilation, and PLC diagnostics regularly to ensure reliable operation.
Conclusion
The Siemens 6AG1134-4GD00-2AB0 Analog Input Module is a robust SIPLUS ET 200S solution for acquiring analog current signals in demanding industrial environments. Its four 4–20 mA input channels, 13-bit resolution, compact 15 × 81 × 52 mm dimensions, and 0.04 kg weight make it well suited for high-density distributed I/O installations. The conformal-coated design provides additional protection against harsh environmental conditions.
Proper installation, accurate PLC configuration, reliable grounding, systematic commissioning, and preventive maintenance help maximize operational reliability while minimizing downtime in industrial automation systems.