ProductPRODUCT
Featured products
Contact Us
- GE
- IC200ALG266
- Analog Input Module
- USA
- 110 x 66.8 x 50 mm
- 0.104 kg
- Xiamen, China
- New & In Stock
- T/T, PayPal, Western Union
- 1 Year
- 1-3 Working Days
- DHL, UPS, TNT, FedEx and EMS.
- 24-Hour Service
- COO
- 24
Our advantage
Global Logistics
We have a 10-year logistics and express cooperation agreement, so our products can be shipped to any place in the world.
Brand new and original
Our products are imported in bulk from the place of origin. Because of the cooperative relationship, our products are all original and 100% new.
24-hour service
We provide 7*24 hours service to our customers. We will be there whenever you need us.
Price advantage
All our products are priced very favorably because we have our own warehouse and supply.
| Company Information | |||
| [email protected] | |||
| Mobile | +8615980777398 | ||
| +8615980777398 | |||
| 15980777398 |
Product Overview
The GE IC200ALG266 is a VersaMax Analog Input Module designed for industrial PLC and automation systems that require reliable acquisition of continuously varying process signals. It provides an interface between compatible field instruments and the GE VersaMax control platform, allowing analog measurement data to be transferred into the PLC for monitoring, processing, alarming, and control.
In industrial automation, many important operating parameters are represented by continuously changing signals rather than simple ON/OFF states. Temperature, pressure, flow, level, speed, and other physical variables must be measured and evaluated in real time. An analog input module provides the connection between these field measurements and the digital control logic running inside the PLC.
The IC200ALG266 can therefore serve as an important signal acquisition component in a VersaMax-based control architecture. Field sensors or transmitters provide electrical measurement signals, while the module receives these signals and makes the corresponding data available to the PLC system.
After acquisition, the PLC application can use the measurement values for process calculations, alarm generation, equipment monitoring, trend analysis, interlocking, or closed-loop control. When connected to an appropriate HMI or SCADA architecture, the same information can also be presented to operators and maintenance personnel.
The supplied dimensions of the GE IC200ALG266 are approximately 110 × 66.8 × 50 mm, with a supplied weight of approximately 0.104 kg. Its compact modular construction makes it suitable for industrial control cabinets and VersaMax I/O installations.
Technical Specifications
| Parameter | Details |
|---|---|
| Manufacturer | GE Fanuc / GE Intelligent Platforms |
| Model | IC200ALG266 |
| Product Family | VersaMax |
| Product Type | Analog Input Module |
| Main Function | Analog Signal Acquisition |
| System Application | PLC and Industrial Automation |
| Signal Processing | Analog Signal Acquisition and Conversion |
| Input Application | Continuous Process Measurement |
| Dimensions | 110 × 66.8 × 50 mm |
| Weight | 0.104 kg |
| Installation | VersaMax I/O System |
| System Role | Field Instrumentation Interface |
| Typical Applications | Process Monitoring and Industrial Control |
Function and Working Principle
The main function of the GE IC200ALG266 is to acquire analog information from compatible field devices and provide the resulting measurement data to the PLC control system.
A typical application begins with a field sensor or transmitter measuring a physical variable. The instrument produces an electrical signal corresponding to the measured condition. The IC200ALG266 receives the signal and performs the necessary signal acquisition and conversion so that the controller can process the measurement.
The basic signal path can be represented as:
Physical Process → Sensor / Transmitter → IC200ALG266 → Signal Conversion → VersaMax CPU → PLC Control Logic
For example, a temperature transmitter may monitor the temperature of a production process and provide a corresponding analog signal. The IC200ALG266 acquires the measurement, while the PLC application interprets the value and determines whether the process is operating within the desired range.
If the temperature becomes too high, the controller can generate an alarm, adjust a heating or cooling output, or initiate another programmed control sequence.
This feedback process allows the automation system to react to real physical conditions rather than relying only on discrete equipment status signals.
Role in Industrial Control Systems
The IC200ALG266 provides the measurement interface between field instrumentation and PLC logic. It is particularly useful in systems where process variables must be monitored continuously and converted into actionable control information.
Analog measurement data can be used for:
- Real-time process monitoring
- Temperature measurement
- Pressure measurement
- Flow monitoring
- Liquid level monitoring
- Position feedback
- Speed feedback
- Equipment condition monitoring
- Energy and utility monitoring
- Closed-loop control
After the measurement reaches the PLC, the application program can scale the raw value into engineering units, compare it with alarm limits, calculate derived values, or use it as an input for automated control algorithms.
Industrial Applications
Manufacturing Automation
Industrial production equipment often requires continuous measurement of temperature, pressure, speed, position, and other machine variables. The IC200ALG266 can provide the PLC with the necessary process information.
Process Automation
Process industries depend on continuous feedback to maintain stable operating conditions. Analog input modules allow PLC systems to monitor changing process variables and respond through programmed control logic.
Water and Wastewater Treatment
Water treatment equipment commonly uses instruments to measure tank levels, pressure, flow, and other operating conditions. These measurements can be incorporated into automated pump, valve, and process control strategies.
Packaging Machinery
Packaging machines may require analog feedback for material tension, machine speed, pressure, temperature, and other continuously varying parameters.
Energy and Utility Systems
Pumps, compressors, cooling equipment, and utility systems frequently require real-time measurement of operating conditions. Analog input modules provide the data path between field instrumentation and the PLC.
HVAC Automation
Industrial HVAC systems can use analog measurements for temperature, pressure, airflow, and other process variables used by automatic control programs.
OEM Equipment
OEM machine builders can integrate analog input modules into standardized VersaMax control architectures to provide flexible measurement capabilities for different machine configurations.
Installation and System Integration
Proper installation and commissioning are essential for reliable analog signal acquisition. Before installing the IC200ALG266, engineers should verify the system architecture, module compatibility, field instrument requirements, wiring arrangement, and PLC configuration.
Module Installation
The module should be installed in the appropriate VersaMax I/O configuration. Mechanical connections should be secure and the installation should provide adequate access for wiring and maintenance.
Field Wiring
Analog signal cables should be routed carefully to minimize exposure to electromagnetic interference. Where possible, signal cables should be separated from high-voltage power lines and motor cables.
Grounding and Shielding
Proper grounding and shielding are important considerations in industrial analog measurement systems. Motors, variable frequency drives, contactors, and other equipment can generate electrical noise that may affect sensitive signal circuits.
PLC Configuration
The control system should be configured so that the PLC recognizes the installed analog input hardware and processes the acquired values according to the intended signal range and engineering units.
Commissioning
During commissioning, engineers should compare the PLC measurement with the actual field instrument output. The signal should be tested under different process conditions to verify correct response, stability, and scaling.
Maintenance
Routine maintenance should include checking terminal connections, field wiring, sensor condition, grounding, shielding, and module status. When an unexpected measurement occurs, the complete signal path should be checked before replacing the module.
Compatible System Components
| Component | Function |
|---|---|
| VersaMax CPU | Main PLC Processing and Control |
| VersaMax Power Supply | System Power |
| IC200ALG266 | Analog Signal Acquisition |
| Digital Input Modules | Discrete Signal Acquisition |
| Digital Output Modules | Discrete Equipment Control |
| Analog Output Modules | Continuous Control Signal Generation |
| Temperature Transmitters | Temperature Measurement |
| Pressure Transmitters | Pressure Measurement |
| Flow Instruments | Flow Measurement |
| Level Transmitters | Level Measurement |
| HMI Systems | Operator Monitoring |
| SCADA Systems | Supervisory Monitoring and Data Management |
Recommended Alternative Models
When selecting an alternative module, engineers should compare the actual electrical signal requirements, channel configuration, resolution, isolation, wiring method, PLC architecture, and application requirements. A similar physical size does not necessarily mean that two analog modules are electrically interchangeable.
| Model | Product Type | Key Feature | Application |
|---|---|---|---|
| IC200ALG266 | Analog Input Module | VersaMax Analog Signal Acquisition | Industrial Automation |
| IC200ALG240 | Analog Input Module | Analog Process Monitoring | PLC Control Systems |
| IC200ALG262 | Analog Input Module | Continuous Process Signal Acquisition | VersaMax Systems |
| IC200ALG263 | Analog Input Module | Industrial Analog Measurement | Process Automation |
| IC200ALG264 | Analog Input Module | Analog Process Data Acquisition | Industrial Control |
| IC200ALG320 | Analog Output Module | Analog Control Signal Generation | Process Control |
Key Advantages
- Designed for GE VersaMax PLC architectures
- Provides an interface between field instrumentation and PLC control logic
- Supports continuous analog process monitoring
- Suitable for industrial measurement applications
- Useful for process feedback and automated control
- Can be integrated into HMI and SCADA architectures
- Suitable for closed-loop control strategies
- Compact modular construction
- Suitable for OEM machine applications
- Supports flexible PLC-based automation systems
- Helps improve real-time visibility of process conditions
Technical FAQs
What is the GE IC200ALG266?
The GE IC200ALG266 is a VersaMax analog input module designed to acquire continuously varying process signals from compatible industrial field instruments.
What is the main function of the IC200ALG266?
Its primary function is to provide analog process measurement data to the PLC so that the controller can monitor and respond to changing operating conditions.
Why are analog inputs important in industrial PLC systems?
Analog inputs allow a PLC to receive actual process measurements rather than only discrete ON/OFF information. This enables more detailed monitoring, alarming, calculation, and automatic control.
What field devices can be used with an analog input system?
Depending on the required electrical signal characteristics, compatible field devices may include temperature transmitters, pressure transmitters, flow instruments, level transmitters, and other analog measurement equipment.
Is the IC200ALG266 a digital input module?
No. The IC200ALG266 is an analog input module designed for continuously varying process measurements.
Where is the IC200ALG266 commonly used?
It can be used in manufacturing automation, process control, water treatment, packaging equipment, utility systems, HVAC automation, and OEM machinery.
What are the dimensions of the IC200ALG266?
The supplied dimensions are approximately 110 × 66.8 × 50 mm.
What is the weight of the IC200ALG266?
The supplied weight is approximately 0.104 kg.
Can the analog values be displayed on an HMI?
Yes. Once the PLC receives and processes the analog measurements, the values can be displayed through a compatible HMI as part of the overall automation system.
Can the module be integrated into a SCADA system?
Yes. When the PLC and communication architecture provide the required data exchange, acquired analog values can be made available to SCADA systems for supervisory monitoring and data management.
What should be checked if an analog reading is incorrect?
Engineers should check the field sensor or transmitter, signal wiring, power supply, terminal connections, grounding, shielding, PLC configuration, signal scaling, and environmental interference before concluding that the module itself is defective.
Why is proper shielding important for analog signals?
Industrial equipment such as motors, drives, contactors, and switching devices can generate electromagnetic interference. Proper shielding and grounding can help minimize unwanted noise in analog measurement circuits.
Is the IC200ALG266 suitable for OEM machine builders?
Yes. Its modular construction allows it to be incorporated into PLC-based OEM equipment where analog process measurement and feedback are required.
Conclusion
The GE IC200ALG266 Analog Input Module provides an important measurement interface for GE VersaMax PLC systems. By acquiring analog signals from compatible field instruments, it allows the controller to monitor continuously changing process conditions and use those measurements for control, alarms, calculations, visualization, and supervisory monitoring.
With supplied dimensions of approximately 110 × 66.8 × 50 mm and a supplied weight of approximately 0.104 kg, the module offers a compact solution for industrial control installations requiring analog signal acquisition.
For OEM machine builders, system integrators, and industrial maintenance engineers, reliable application depends on correct module selection, compatible field instrumentation, appropriate wiring, grounding, PLC configuration, and commissioning. When these elements are properly addressed, the IC200ALG266 can form a useful part of a VersaMax-based industrial automation system.